Brief introduction of 57319-65-0

As the paragraph descriping shows that 57319-65-0 is playing an increasingly important role.

57319-65-0, 6-Aminoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a stirred solution of 2-(3,4-bis(3,4-dimethoxyphenyl)-2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)acetic acid 1 (70 mg, 0.16 mmol) and EDCI (47 mg, 0.25 mmol) in dry CH2Cl2 (5 mL) at 0 C under N2 atmosphere was added DMAP (30 mg, 0.25 mmol) and 14, 15, 18, or 19 (0.2 mmol) in batch over 10 min. The reaction mixture was stirred overnight while the reaction temperature rose to room temperature naturally. The solution was diluted with CH2Cl2 (20 mL), washed with brine, and dried over anhydrous MgSO4. The solvent was evaporated to dryness to give the crude residue. The residue was purified by flash chromatography on silica gel (EtOAc/PE = 2:1, v/v) to afford the desired compound 16, 17. 2-(3,4-Bis(3,4-dimethoxyphenyl)-2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)-N-(3-oxo-1,3-dihydroisobenzofuran-4-yl)-acetamide (16) Yield 69%; mp 244-246 C; 1H NMR (CDCl3, 500 MHz) d: 8.4 (s,1H), 8.0 (d, J = 8.2 Hz, 1H), 7.94 (s, 1H), 7.42 (d, J = 8.3 Hz, 1H), 7.23 (d, J = 8.4 Hz, 2H), 7.06 (s, 3.70 (s, 6H); 13C NMR (CDCl3, 126 MHz) d: 170.7, 164.9, 150.5, 148.7, 142.1, 138.5, 134.5, 126.1, 123.6, 122.7, 121.0, 116.1, 112.5, 110.9, 69.7, 55.9, 55.8, 41.8, 29.6; HRMS calcd for (C30H26O9N2+H)+ 559.1711, found 559.1704., 57319-65-0

As the paragraph descriping shows that 57319-65-0 is playing an increasingly important role.

Reference£º
Article; Wang, Zhen; Wong, Iris L.K.; Li, Fu Xing; Yang, Chao; Liu, Zhen; Jiang, Tao; Jiang, Ting Fu; Chow, Larry M.C.; Wan, Sheng Biao; Bioorganic and Medicinal Chemistry; vol. 23; 17; (2015); p. 5566 – 5573;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Downstream synthetic route of 652-39-1

The synthetic route of 652-39-1 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.652-39-1,4-Fluoroisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

652-39-1, To a stirred solution of 4-fluoroisobenzofuran-1,3-dione (25 g, 150 mmol, CAS652-39-1) in DMF (100 mL) was added L-glutamine (22 g, 150 mmol) at rt. The resulting reaction mixture was heated to at 90 C. and stirred for 2 h. The reaction mixture was then evaporated under reduced pressure, transferred into 4 N aqueous HCl solution and the resulting mixture was stirred for 36 h at rt. The solid precipitate was then filtered off, washed with cold water and dried under reduced pressure to give 5-amino-2-(4-fluoro-1,3-dioxoisoindolin-2-yl)-5-oxopentanoic acid as a white solid (28 g, 63%). LC-MS (ESI+) m/z 295 (M+H)+.

The synthetic route of 652-39-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Kymera Therapeutics, Inc.; Mainolfi, Nello; Ji, Nan; Kluge, Arthur F.; Weiss, Matthew M.; Zhang, Yi; (1443 pag.)US2019/192668; (2019); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

New learning discoveries about 18761-31-4

18761-31-4, The synthetic route of 18761-31-4 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.18761-31-4,5-Nitrobenzofuran,as a common compound, the synthetic route is as follows.

(a) 2,3-Dihydrobenzo[b]furan-5-ylamine. To a 150 mL round-bottomed flask was added 5-nitrobenzofuran, Example 38(d), (250 mg, 1.5 mmol), EtOAc (16 mL) and 10percent Pd on carbon (33 mg, Aldrich). The suspension was stirred at 25¡ã C. under 1 atm H2 for 24 h, then purged with N2, filtered through Celite and concentrated in vacuo to provide the aniline as a red-brown solid. MS (ESI, pos. ion) m/z: 136 (M+1).

18761-31-4, The synthetic route of 18761-31-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Bo, Yunxin Y.; Chakrabarti, Partha P.; Chen, Ning; Doherty, Elizabeth M.; Fotsch, Christopher H.; Han, Nianhe; Kelly, Michael G.; Liu, Qingyian; Norman, Mark Henry; Ognyanov, Vassil I.; Wang, Xianghong; Zhu, Jiawang; US2003/195201; (2003); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Downstream synthetic route of 10242-10-1

10242-10-1, As the paragraph descriping shows that 10242-10-1 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.10242-10-1,5-Chlorobenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

5-chlorobenzofuran-2-carboxylic acid (500 mg, 2.5 mmol) was added to thionyl chloride (5 mL) and heated under reflux for 2 hrs. Solvent was removed under reduced pressure to obtain a white solid, which then used in the next reaction without further purification (510 mg). 1H NMR (400 MHz, Chloroform-d) delta 7.76 (d, J=0.9 Hz, 1H), 7.72 (dd, J=2.0, 0.7 Hz, 1H), 7.56-7.48 (m, 2H).

10242-10-1, As the paragraph descriping shows that 10242-10-1 is playing an increasingly important role.

Reference£º
Patent; The University of North Carolina at Chapel Hill; Juliano, Rudolph L.; Kreda, Silvia M.; Wang, Ling; Ming, Xin; James, Lindsey Ingerman; Ariyarathna, Ranathunga Arachchillage Yamuna Kumari; (53 pag.)US2019/343868; (2019); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Analyzing the synthesis route of 6940-49-4

6940-49-4 3-Bromophthalide 96218, abenzofuran compound, is more and more widely used in various fields.

6940-49-4, 3-Bromophthalide is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Amine (1.05 Equiv) was added to Isatoic anhydride (1.0 Equiv) in water (4.0mL) and PEG400 (1.0mL) at RT and stirred for 1-2 hr. Upon completion of SM by TLC, added 3-bromoisobenzofuran-1(3H)-one (1.1 Equiv) and warm the reaction mixture to 90-95 C and maintained for 10-14 h. After completion of the reaction, cool the reaction mass up to 25-30 C and product was filtered and further purified via column chromatography through silica gel stationary phase and Ethyl acetate & Heptane mixture as eluent., 6940-49-4

6940-49-4 3-Bromophthalide 96218, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Madhubabu; Shankar; Reddy, G. Rajeshwar; Rao, T. Srinivasa; Basaveswara Rao, Mandava V.; Akula, Raghunadh; Tetrahedron Letters; vol. 57; 46; (2016); p. 5033 – 5037;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Simple exploration of 196799-45-8

196799-45-8, 196799-45-8 2,3-Dihydrobenzofuran-7-carbaldehyde 2795018, abenzofuran compound, is more and more widely used in various fields.

196799-45-8, 2,3-Dihydrobenzofuran-7-carbaldehyde is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

2,3-Dihydro-benzofuran-7-carbaldehyde (1.50 g, 10.20 mmol) was dissolved in ether, then cooled to 0 C., NaBH4 (400 mg, 10.57 mmol) in MeOH (5.00 mL) was added. The resulting reaction mixture was stirred for 30 min, then saturated ammonium chloride was added. The mixture was extracted with ether, and the combined organic phases were washed with brine, then dried over magnesium sulfate and concentrated to afford the desired alcohol

196799-45-8, 196799-45-8 2,3-Dihydrobenzofuran-7-carbaldehyde 2795018, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Allergan, Inc.; US2008/255230; (2008); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Some tips on 64169-34-2

As the paragraph descriping shows that 64169-34-2 is playing an increasingly important role.

64169-34-2, 5-Bromoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 5-bromoisobenzofuran-1(3H)-one (21.3 g, 100 mmol) in DCM (200 mL) was added diisobutylaluminum hydride (184 g, 130 mmol) at -78 C. The reaction was stirred at -78 C. until the reaction was complete (?2 h). 10 mL water was added, and 10 mL 4M NaOH (aq.) was added, then 40 mL was water was added, the mixture was stirred at room temperature for 30 mins. The mixture was filtered, the filtrate was concentrated. The resulting solid was purified by flash column chromatography (petroleum ether:EtOAc 100:0 to 80:20) to provide 285 5-bromo-1,3-dihydroisobenzofuran-1-ol (13 g, 60.4 mol) as a white solid. MS (ESI): m/z 196.9 [M-16+1]+., 64169-34-2

As the paragraph descriping shows that 64169-34-2 is playing an increasingly important role.

Reference£º
Patent; Sunovion Pharmaceuticals Inc.; XIE, Linghong; HEFFERNAN, Michele L.R.; JONES, Philip Glyn; HANANIA, Taleen G.; (95 pag.)US2018/30064; (2018); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Some tips on 13196-11-7

13196-11-7, The synthetic route of 13196-11-7 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13196-11-7,Benzofuran-6-ol,as a common compound, the synthetic route is as follows.

Tribromide (2.86 g, 10 mmol) was dissolved in chloroform (10 mL)Cooled to -50 , slow6-hydroxy-2,3-dihydrobenzofuran (1.36 g, 10 mmol) and triethylamine (1.212 g, 12Mmol) in dichloromethane (10 mL)The After completion of the dropwise addition, the cold bath was removed and the mixture was stirred at 25 C2 hours. The reaction was further cooled to -60 C and L-alanine-4-fluorobenzyl ester hydrochloride was addedSalt (2.1 g, 9 mmol) was added dropwise to a solution of triethylamine (2.53 g, 25 mmol) in dichloromethane (5ML). After completion of the dropwise addition, the cold bath was removed and the mixture was stirred at 25 C for 2 hours. Further the reaction is carried outWas cooled to -60 C and pentafluorophenol (1.66 g, 9 mmol) and triethylamine (1.52 g, 15Mmol) in dichloromethane (10 mL). After completion of the dropwise addition, the cold bath was removed and the mixture was stirred at 25 C6 hours. The reaction was complete and the reaction system was poured into ice water and extracted with dichloromethane. CollectionAnd the organic phase was washed with saturated brine aqueous solution, dried and concentrated by filtration to give the intermediate compound(6-fluorobenzyl) -2 – ((pentafluorophenoxy) (benzofuran-6-oxy) phosphoryl) amino)Propionate.

13196-11-7, The synthetic route of 13196-11-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Sichuan Kelun Pharmaceutical Research Institute Co., Ltd.; Liu, Gang; Yu, Nan; Wu, Yongyong; Tang, Zuijian; Zheng, Xiaozhou; Chen, Qiangqiang; Deng, Hanwen; Duan, Xiaofan; Song, Shuai; Yang, Long; Li, Shai; Huang, Haitao; Zhang, Yitao; Zhao, Mingliang; Deng, Hua; Zhong, Wei; Li, Donghong; Ceng, Hong; Guo, Xianfen; Song, Hongmei; Tao, Lihua; Wang, Lichun; Wang, Jingyi; Other inventors request an unlisted name; (127 pag.)CN106554382; (2017); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Analyzing the synthesis route of 64169-34-2

64169-34-2, As the paragraph descriping shows that 64169-34-2 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.64169-34-2,5-Bromoisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

Add phenol (20.4g, 0.22mol) and DMF 50mL to the reaction flask and start stirring.5-Bromoisobenzofuran-1(3H)-one (34.0 g, 0.16 mmol), acetylacetone (3.2 g, 0.03 mol), cuprous bromide (3.6 g, 0.03 mol), potassium carbonate (at room temperature) 30.8g, 0.22mol), three times of nitrogen replacement, heating to 90 C, stirring reaction overnight, adding 1000 mL of purified water to the reaction solution, suction filtration, the filter cake was dissolved in 800 mL of dichloromethane, and the organic phase was washed with 800 mL of 1N hydrochloric acid solution, with purified water. 1000 mL washing, drying the organic phase, and concentrating to dryness under reduced pressure to give a yellow solid.The title compound 2b (22.5 g, 63%) was obtained.

64169-34-2, As the paragraph descriping shows that 64169-34-2 is playing an increasingly important role.

Reference£º
Patent; Sichuan Kelun Botai Bio-pharmaceutical Co., Ltd.; Cai Jiaqiang; Xie Yinong; You Zejin; Song Changwei; Zhang Jichao; Li Lu; Zhang Qiaoling; Wang Yongqiang; Chen Xing; Jiao Shihu; Li Youqiang; Wang Tao; Zeng Hong; Song Hongmei; Ye Qijun; Su Donghai; Zhou Xin; Zhang Shaohua; Wang Lichun; Wang Jingyi; (122 pag.)CN108341777; (2018); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Analyzing the synthesis route of 652-39-1

652-39-1 4-Fluoroisobenzofuran-1,3-dione 69551, abenzofuran compound, is more and more widely used in various fields.

652-39-1, 4-Fluoroisobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,652-39-1

The subtitle compound is prepared according to the procedure adapted from C.G. Thomson et a.., Bioorg. Med. Chern. Letters 2006, 16(5), 1388-1391: 3-fluorophthalic acid anhydride (29.7 mmol) is reacted with phenyl acetic acid (59.4 mmol) in Ac2O (16 mL) in the presence of NEt3 (21 mL) at reflux, followed by treatment with 30percent sol. of NaOMe in MeOH (48 mL) at reflux.

652-39-1 4-Fluoroisobenzofuran-1,3-dione 69551, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; ACTELION PHARMACEUTICALS LTD; FRETZ, Heinz; GATFIELD, John; ISLER, Markus; KIMMERLIN, Thierry; KOBERSTEIN, Ralf; LYOTHIER, Isabelle; MONNIER, Lucile; POTHIER, Julien; VALDENAIRE, Anja; WO2013/68785; (2013); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem