Day: September 16, 2020

4265-16-1,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4265-16-1,Benzo[b]furan-2-carboxaldehyde,as a common compound, the synthetic route is as follows.

In a 25 mL two-necked round bottom flask equipped with a thermometer and a magnetic stirrer4 mmolofBenzofuran-2-carbaldehyde (1-19), 6 mmol of NH4OAc, 4 mmol of Na2CO3, 4.4 mmol of TBHP, 0.1 mmol of I2, 5 mL of absolute ethanol Solvent, followed by placing the reaction flask in an oil bath preheated to 50 C and opening the magnetic stirrer for 5 h. The reaction solution By adding sodium thiosulfate solution, stirring, and then extracting with ether, separating the organic layer, and removing the solvent under reduced pressure, The eluate was collected with the mixture of ethyl acetate / petroleum ether in a volume ratio of 1: 100 as the eluent, and the eluate containing the target compound was collected. The solvent was distilled off to give benzofuran-2-carbonitrile with an isolated yield of 72%.

The synthetic route of 4265-16-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Zhejiang University of Technology; Shen Zhenlu; Li Meichao; Fang Chaojie; Mo Weimin; (12 pag.)CN106748881; (2017); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

77095-51-3, Benzofuran-6-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

77095-51-3, Oxalyl chloride (29.35 gm) was slowly added to a pre-cooled mixture of compound of formula-2 (25 gm), dimethylformamide (5 ml) and tetrahydrofuran (325 ml) at 0-5C under nitrogen atmosphere. Raised the temperature of the reaction mixture to 25-30C and stirred for 5 hr at the same temperature. A solution of pentafluorophenol (31.21 gm) in tetrahydrofuran (25 ml) was added to the reaction mixture at 25-30C. Cooled the reaction mixture to 0-5C and Nu,Nu-diisopropylethyl amine (99.64 gm) was slowly added to it at the same temperature. Raised the temperature of the reaction mixture to 25-30C and stirred for 90 min at the same temperature. Methyl tert.butyl ether and water were added to the reaction mixture at 25-30C and stirred the reaction mixture for 10 min at the same temperature. Both the organic and aqueous layers were separated and washed the organic layer with 10% aqueous sodium bicarbonate solution followed by with water. Distilled off the solvent completely from the organic layer and co-distilled with acetonitrile. Compound of formula- 4a (47.92 gm), acetonitrile (250 ml) and N,N-diisopropylethylamine (59.78 gm) were added to the obtained compound at 25-30C and stirred the reaction mixture for 40 min at the same temperature. Heated the reaction mixture to 60-65 C and stirred for 3 hr at the same temperature. Cooled the reaction mixture to 5-10C, 50% aq.HCl solution was slowly added to it and stirred the reaction mixture for 2 hr at the same temperature. Filtered the solid and washed with water. Ethyl acetate (175 ml) and water (250 ml) were added to the obtained compound at 25-30C. Slowly basified the reaction mixture by using 10% aqueous potassium carbonate solution (25 gm of potassium carbonate in 250 ml of water) at 25-30C and stirred the reaction mixture for 10 min at the same temperature. Both the organic and aqueous layers were separated and washed the aqueous layer with ethyl acetate. Slowly acidified the aqueous layer by using 50% aqueous hydrochloric acid solution (25 ml of hydrochloric acid in 25 ml of water) at 25-30C and stirred the reaction mixture for 3 hr at the same temperature. Filtered the solid, washed with acetone and dried the material to get the title compound. The PXRD pattern of the obtained compound is illustrated in figure- 1.

As the paragraph descriping shows that 77095-51-3 is playing an increasingly important role.

Reference£º
Patent; MSN LABORATORIES PRIVATE LIMITED, R&D CENTER; SRINIVASAN, Thirumalai Rajan; SAJJA, Eswaraiah; GHOJALA, Venkat Reddy; SAGYAM, Rajeshwar Reddy; RANGINENI, Srinivasulu; KOMMERA, Rajashekar; (71 pag.)WO2019/43724; (2019); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

64169-34-2, 5-Bromoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

5-Bromoisobenzofuran-1(3H)-one (10.00 g, 47.2 mmol),Benzyltriethylammonium chloride (2.20g, 9.4mmol), boron trifluoride diethyl ether (1.20mL, 9.40mmol), xylene (50mL) was added to the reaction flask, and the reaction solution was replaced with nitrogen three times and then heated to 110 C. Reaction for 30 min. Next, thionyl chloride (8.60 mL, 118.0 mmol) was slowly added dropwise to the above reaction solution, and the mixture was heated to 130 C for 6 hours, cooled to 40-50 C, and the reaction was quenched by dropwise addition of methanol (20 mL). The reaction solution is evaporated under reduced pressure to give a solvent.The title compound 1b (11.40 g, 93.0%) was obtained.

64169-34-2, As the paragraph descriping shows that 64169-34-2 is playing an increasingly important role.

Reference£º
Patent; Sichuan Kelun Botai Bio-pharmaceutical Co., Ltd.; Cai Jiaqiang; Xie Yinong; You Zejin; Song Changwei; Zhang Jichao; Li Lu; Zhang Qiaoling; Wang Yongqiang; Chen Xing; Jiao Shihu; Li Youqiang; Wang Tao; Zeng Hong; Song Hongmei; Ye Qijun; Su Donghai; Zhou Xin; Zhang Shaohua; Wang Lichun; Wang Jingyi; (122 pag.)CN108341777; (2018); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.496-16-2,2,3-Dihydrobenzo[b]furan,as a common compound, the synthetic route is as follows.

EXAMPLE 1; N-[7-(4-piperidinyl)oxy-1-benzofuran-5-yl]-2-methoxy-5-methylbenzenesulfonamide; Example 1 was prepared as follows: 7-iodo-N-(2-methoxy-5-methylphenyl)-1-benzofuran-5-sulfonamide is produced starting from 2,3-dihydrobensofuran. Treatment with chlorosulfonic acid gives the corresponding sulfonyl chloride, which is iodinated using iodine monochloride. Aromatization is done using NBS, resulting in 7-iodo-N-(2-methoxy-5-methylphenyl)-1-benzofuran-5-sulfonamide after treatment with cresidine. Hydrolysis of 7-iodo-N-(2-methoxy-5-methylphenyl)-1-benzofuran-5-sulfonamide in alkaline solution using copper as catalyst results in 7-hydroxy-N-(2-methoxy-5-methylphenyl)-1-benzofuran-5-sulfonamide. Reaction with a methyl carbamate protected mesylate of 4-hydroxypiperidine, results in methyl 4-[(5-{[(2-methoxy-5-methylphenyl)amino]sulfonyl}-1-benzofuran-7-yl)oxy]piperidine-1-carboxylate, which is hydrolysed in alkaline solution giving the title compound., 496-16-2

The synthetic route of 496-16-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Caldirola, Patrizia; Johansson, Gary; Sutin, Lori; US2006/293361; (2006); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.6940-49-4,3-Bromophthalide,as a common compound, the synthetic route is as follows.

(2) Preparation of 1-(3-oxo-1,3-dihydro-1-isobenzofuranyl)-5-fluorouracil STR26 In the same manner as in Example 3-(2), a mixture of the compound 11 provided in the above step (1) and 5-FU in dimethylsulfoxide is allowed to react in the presence of 1 equimolar amount of anhydrous potassium carbonate at room temperature to give the titled compound 3 in good yield.

6940-49-4, As the paragraph descriping shows that 6940-49-4 is playing an increasingly important role.

Reference£º
Patent; Shionogi & Co., Ltd.; US4605738; (1986); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4265-16-1,Benzo[b]furan-2-carboxaldehyde,as a common compound, the synthetic route is as follows.

The 2-(thiophen-2-yl) acetonitrile (1 g, 8.118mmole), benzofuran-2-carbaldehyde (1.2 g, 8.118 mmol), and 2 g ofNaOH were dissolved in 45 ml of ethanol. Then, these reactionmixtures were stirred vigorously at normal room temperature for24 h. The improvement of the reactionwas monitored by TLC. Aftercompletion of the reaction, the mixtures were poured into ice coldwater. The solid product was filtered, washed with cold ethanol toremove excess benzofuran-2-carbaldehyde, and dried in a vacuumchamber to collect the green colouredcrude product. The precipitatewas allowed to purify by column chromatography techniqueusing the mixture of Hexane: Ethyl Acetate (2/8): eluent. Rectangularslabsof green colour crystals (yield was 88%) of the TACNBNFwas grown using slow evaporation method by DCM (2 ml) andmethanol (1 ml) mixture solvents.

4265-16-1, The synthetic route of 4265-16-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Ahamed, J. Irshad; Priya; Vinothkumar; Sathyamoorthy; MuraliManohar; Liu, Jinghe; Valan; Journal of Molecular Structure; vol. 1202; (2020);,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

1914-60-9, 2,3-Dihydrobenzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a mixture of 7 (1 eq) and 1,1?-carbodiimidazole (1.2 eq) in anhydrous THF was stirred for 1h then substituted aniline (0.9 eq) was added at room temperature. After stirring for 14 h, solvent was evaporated then the mixture acidified with 6N HCl to pH 2. The mixture was extracted with EtOAc (3 ¡Á 20 mL). The combined extracts were dried over anhydrous Na2SO4and the solvent was evaporated. After evaporation, the residue was purified by column chromatography (EtOAc/hexane = 1:3 – 1:50).

1914-60-9, As the paragraph descriping shows that 1914-60-9 is playing an increasingly important role.

Reference£º
Article; Choi, Minho; Jo, Hyeju; Park, Hyun-Jung; Sateesh Kumar, Arepalli; Lee, Joonkwang; Yun, Jieun; Kim, Youngsoo; Han, Sang-Bae; Jung, Jae-Kyung; Cho, Jungsook; Lee, Kiho; Kwak, Jae-Hwan; Lee, Heesoon; Bioorganic and Medicinal Chemistry Letters; vol. 25; 12; (2015); p. 2545 – 2549;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.54008-77-4,2-Bromobenzofuran,as a common compound, the synthetic route is as follows.

54008-77-4, General procedure: In a hot oven-dried Schlenk tube under N2 atmosphere were added Ph3Bi (0.25 mmol, 110 mg, 1.0 equiv), 2-bromobenzofuran (0.825 mmol, 163 mg, 3.3 equiv), Cs2CO3 (0.75 mmol, 244 mg, 3.0 equiv), Pd(OAc)2 (0.025 mmol, 5.6 mg, 0.1 equiv), PPh3 (0.1 mmol, 26 mg, 0.4 equiv), and NMP (3 mL) solvent. The resulting mixture was stirred in preheated oil bath at 90 C for 1 h. After the reaction is over, the mixture was cooled, quenched with dil HCl and extracted with ethyl acetate. The combined organic extract was washed with water, brine, and dried over MgSO4 and concentrated. The crude was subjected to silica gel column chromatography (230-400 mesh) using petroleum ether as the eluent to obtain the pure 2-phenylbenzofuran (2.1) as a white solid (140 mg, 96%). The product was characterized by spectroscopy and in comparison with the literature data.

As the paragraph descriping shows that 54008-77-4 is playing an increasingly important role.

Reference£º
Article; Rao, Maddali L.N.; Awasthi, Dheeraj K.; Talode, Jalindar B.; Tetrahedron Letters; vol. 53; 21; (2012); p. 2662 – 2666;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

496-16-2, 2,3-Dihydrobenzo[b]furan is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of 44.4 g (0.37 moles) of 2,3-dihydrobenzofuran and 37.8 g (0.37 moles) of acetic anhydride were added with 5.0 g (37 mmoles) of anhydrous zinc chloride. The mixture was heated to 95-105 0C for 10 hrs; after cooling to room temperature the mixture is added with 50 ml of water and 50 ml of dichloromethane. The organic phase was separated and the aqueous phase was extracted twice with dichloromethane (2x 30 ml). The organic phases were collected together, and washed with 50 ml of a saturated aqueous solution of sodium carbonate. The organic phase was separated and evaporated u.v. (20 C/21 mbar). The residue was then distilled at 99-100 C/0.08 mbar obtaining 14.5 g (0.089 moles) of 5-acetyl-2,3- dihydrobenzofuran. 1H NMR (400 MHz; CDCI3): delta: 2.50 (s, 3H); 3.20 (t, 2H, J = 8.7 Hz); 4.64 (t, 2H, J = 8.7 Hz); 6.76 (d, 1 H, J = 8.4 Hz); 7.76 (m, 1 H); 7.81 (m, 1 H).13C-NMR (CDCI3, 100MHz): delta: 26.22; 28.79; 72.02; 108.72; 125.34; 127.50; 130.17; 130.48; 164.19; 196.41., 496-16-2

As the paragraph descriping shows that 496-16-2 is playing an increasingly important role.

Reference£º
Patent; ENDURA S.P.A.; ROTHAMSTED RESEARCH LTD.; BORZATTA, Valerio; CAPPARELLA, Elisa; MORONI, Leni; MOORES, Graham; PHILIPPOU, Despina; WO2011/20848; (2011); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

6940-49-4, 3-Bromophthalide is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

678.5 mg of material was dissolved in 8 ml of N,N-dimethylacetamide, then 0.172 g of potassium carbonate and 263 mg of 7-bromo-2-benzofuranone were added in turn. The mixture was reacted at 40-45 C. for 4 hours. At the end of the reaction, 30 ml of water was added. The resulting mixture was extracted twice with 25 ml of ethyl ether. The organic phase was dried and concentrated to give 606.4 mg of esterified intermediate with a yield of 75%. The intermediate was dissolved in 15 ml of dioxane and 4 ml of 4N HCl was added. The mixture was reacted at room temperature for 16 hours. The resulting solution was poured into water, extracted with ethyl acetate, dried, concentrated and flash chromatographed (eluent: ethyl acetate/petroleum ether=1/2) to give 284.7 mg of pure product (+/-)2-butyl-4-chloro-1-[2′-(1H-tetrazol-5-yl)1,1′-biphenyl-methyl]imidazole-5-carboxylic acid, 2[C]-benzofuranonyl ester with a yield of 67%.1H-NMR (DMSO-d6) delta H (ppm): 0.88 (t, 3H, J=21.6), 1.26 (m, 4H, J=29.6), 1.58 (m, 2H, J=30.5), 2.50 (t, 2H, J=15.5), 5.34 (s, 2H), 6.95-7.63 (12H), 8.06 (d, 2H, J=9.1)ESI (+) m/z: 569.5Mp: 120.6-124.6 C., 6940-49-4

6940-49-4 3-Bromophthalide 96218, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Guo, Jianhui; An, Dong; US2009/36505; (2009); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem