Downstream synthetic route of 1914-60-9

1914-60-9, The synthetic route of 1914-60-9 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1914-60-9,2,3-Dihydrobenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

To a mixture of 2,3-dihydrobenzofuran-2-carboxylic acid (1.0 g, 6.09 mmol) in DMF (10 mL) was added NCS (976 mg, 7.31 mmol) at 25 C, and the mixture was heated to 60 C for 3 h. The reaction mixture was adjusted to pH = 5-6 by addition of iN HC1, and EtOAc was added (10 mL). The layers were separated and the aqueous phase was extracted with EtOAc (3 x 5 mL). The combined organic phases were washed with brine (5 mL), dried over anhydrous Na2SO4, filtered and concentrated under reduced pressure to provide 5 -chloro-2,3 -dihydrobenzofuran-2-carboxylic acid.

1914-60-9, The synthetic route of 1914-60-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; DENALI THERAPEUTICS INC.; CRAIG, Robert A., II; ESTRADA, Anthony A.; FENG, Jianwen A.; FOX, Brian; HALE, Christopher R. H.; LEXA, Katrina W.; OSIPOV, Maksim; REMARCHUCK, Travis; SWEENEY, Zachary K.; DE VICENTE FIDALGO, Javier; (187 pag.)WO2019/32743; (2019); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Downstream synthetic route of 1914-60-9

The synthetic route of 1914-60-9 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1914-60-9,2,3-Dihydrobenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: To a mixture of 7 (1 eq) and 1,1?-carbodiimidazole (1.2 eq) in anhydrous THF was stirred for 1h then substituted aniline (0.9 eq) was added at room temperature. After stirring for 14 h, solvent was evaporated then the mixture acidified with 6N HCl to pH 2. The mixture was extracted with EtOAc (3 ¡Á 20 mL). The combined extracts were dried over anhydrous Na2SO4and the solvent was evaporated. After evaporation, the residue was purified by column chromatography (EtOAc/hexane = 1:3 – 1:50)., 1914-60-9

The synthetic route of 1914-60-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Choi, Minho; Jo, Hyeju; Park, Hyun-Jung; Sateesh Kumar, Arepalli; Lee, Joonkwang; Yun, Jieun; Kim, Youngsoo; Han, Sang-Bae; Jung, Jae-Kyung; Cho, Jungsook; Lee, Kiho; Kwak, Jae-Hwan; Lee, Heesoon; Bioorganic and Medicinal Chemistry Letters; vol. 25; 12; (2015); p. 2545 – 2549;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Brief introduction of 1914-60-9

1914-60-9 2,3-Dihydrobenzofuran-2-carboxylic acid 2776555, abenzofuran compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1914-60-9,2,3-Dihydrobenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: To a mixture of 7 (1 eq) and 1,1?-carbodiimidazole (1.2 eq) in anhydrous THF was stirred for 1h then substituted aniline (0.9 eq) was added at room temperature. After stirring for 14 h, solvent was evaporated then the mixture acidified with 6N HCl to pH 2. The mixture was extracted with EtOAc (3 ¡Á 20 mL). The combined extracts were dried over anhydrous Na2SO4and the solvent was evaporated. After evaporation, the residue was purified by column chromatography (EtOAc/hexane = 1:3 – 1:50)., 1914-60-9

1914-60-9 2,3-Dihydrobenzofuran-2-carboxylic acid 2776555, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Choi, Minho; Jo, Hyeju; Park, Hyun-Jung; Sateesh Kumar, Arepalli; Lee, Joonkwang; Yun, Jieun; Kim, Youngsoo; Han, Sang-Bae; Jung, Jae-Kyung; Cho, Jungsook; Lee, Kiho; Kwak, Jae-Hwan; Lee, Heesoon; Bioorganic and Medicinal Chemistry Letters; vol. 25; 12; (2015); p. 2545 – 2549;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Some tips on 1914-60-9

1914-60-9, As the paragraph descriping shows that 1914-60-9 is playing an increasingly important role.

1914-60-9, 2,3-Dihydrobenzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a mixture of 7 (1 eq) and 1,1?-carbodiimidazole (1.2 eq) in anhydrous THF was stirred for 1h then substituted aniline (0.9 eq) was added at room temperature. After stirring for 14 h, solvent was evaporated then the mixture acidified with 6N HCl to pH 2. The mixture was extracted with EtOAc (3 ¡Á 20 mL). The combined extracts were dried over anhydrous Na2SO4and the solvent was evaporated. After evaporation, the residue was purified by column chromatography (EtOAc/hexane = 1:3 – 1:50).

1914-60-9, As the paragraph descriping shows that 1914-60-9 is playing an increasingly important role.

Reference£º
Article; Choi, Minho; Jo, Hyeju; Park, Hyun-Jung; Sateesh Kumar, Arepalli; Lee, Joonkwang; Yun, Jieun; Kim, Youngsoo; Han, Sang-Bae; Jung, Jae-Kyung; Cho, Jungsook; Lee, Kiho; Kwak, Jae-Hwan; Lee, Heesoon; Bioorganic and Medicinal Chemistry Letters; vol. 25; 12; (2015); p. 2545 – 2549;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Analyzing the synthesis route of 1914-60-9

1914-60-9, 1914-60-9 2,3-Dihydrobenzofuran-2-carboxylic acid 2776555, abenzofuran compound, is more and more widely used in various fields.

1914-60-9, 2,3-Dihydrobenzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a mixture of 7 (1 eq) and 1,1?-carbodiimidazole (1.2 eq) in anhydrous THF was stirred for 1h then substituted aniline (0.9 eq) was added at room temperature. After stirring for 14 h, solvent was evaporated then the mixture acidified with 6N HCl to pH 2. The mixture was extracted with EtOAc (3 ¡Á 20 mL). The combined extracts were dried over anhydrous Na2SO4and the solvent was evaporated. After evaporation, the residue was purified by column chromatography (EtOAc/hexane = 1:3 – 1:50).

1914-60-9, 1914-60-9 2,3-Dihydrobenzofuran-2-carboxylic acid 2776555, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Choi, Minho; Jo, Hyeju; Park, Hyun-Jung; Sateesh Kumar, Arepalli; Lee, Joonkwang; Yun, Jieun; Kim, Youngsoo; Han, Sang-Bae; Jung, Jae-Kyung; Cho, Jungsook; Lee, Kiho; Kwak, Jae-Hwan; Lee, Heesoon; Bioorganic and Medicinal Chemistry Letters; vol. 25; 12; (2015); p. 2545 – 2549;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Simple exploration of 1914-60-9

As the paragraph descriping shows that 1914-60-9 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1914-60-9,2,3-Dihydrobenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

A mixture of 5-bromopyridin-3-amine (300 mg, 1.73 mmol), 2,3- dihydrobenzofuran-2-carboxylic acid (426 mg, 2.60 mmol) and EDCI.HC1 (497 mg, 2.60 mmol) in pyridine (4 mL) was stirred at 50 C for 2 h. The reaction mixture turned into brown solution from yellow. The reaction mixture was concentrated and the residue was diluted with water (25 mL), and then extracted with EtOAc (25 mL x3). The combined organic layer was washed with brine (25 mL), dried over anhydrous Na2S04 and concentrated. The residue was purified by Combi Flash (20% to 50% EtOAc in pentane) to give N-(5-bromopyridin-3-yl)- 2,3-dihydrobenzofuran-2-carboxamide (500 mg, yield: 91%) as yellow gum. (1699) NMR (400 MHz, CDCb) d 3.49-3.57 (1H, m), 3.64-3.74 (1H, m), 5.28 (1H, dd, J= 10.8, (1700) 6.5 Hz), 6.94-7.01 (2H, m), 7.18-7.26 (2H, m), 8.39-8.49 (3H, m), 8.54 (1H, d, J= 2.3 Hz)., 1914-60-9

As the paragraph descriping shows that 1914-60-9 is playing an increasingly important role.

Reference£º
Patent; PETRA PHARMA CORPORATION; KESICKI, Edward A.; LINDSTROeM, Johan; PERSSON, Lars Boukharta; VIKLUND, Jenny; FORSBLOM, Rickard; GINMAN, Tobias; HICKEY, Eugene R.; DAHLGREN, Markus K.; GERASYUTO, Aleksey I.; (391 pag.)WO2019/126730; (2019); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Simple exploration of 1914-60-9

As the paragraph descriping shows that 1914-60-9 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1914-60-9,2,3-Dihydrobenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: To a mixture of 7 (1 eq) and 1,1?-carbodiimidazole (1.2 eq) in anhydrous THF was stirred for 1h then substituted aniline (0.9 eq) was added at room temperature. After stirring for 14 h, solvent was evaporated then the mixture acidified with 6N HCl to pH 2. The mixture was extracted with EtOAc (3 ¡Á 20 mL). The combined extracts were dried over anhydrous Na2SO4and the solvent was evaporated. After evaporation, the residue was purified by column chromatography (EtOAc/hexane = 1:3 – 1:50)., 1914-60-9

As the paragraph descriping shows that 1914-60-9 is playing an increasingly important role.

Reference£º
Article; Choi, Minho; Jo, Hyeju; Park, Hyun-Jung; Sateesh Kumar, Arepalli; Lee, Joonkwang; Yun, Jieun; Kim, Youngsoo; Han, Sang-Bae; Jung, Jae-Kyung; Cho, Jungsook; Lee, Kiho; Kwak, Jae-Hwan; Lee, Heesoon; Bioorganic and Medicinal Chemistry Letters; vol. 25; 12; (2015); p. 2545 – 2549;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Brief introduction of 1914-60-9

1914-60-9, 1914-60-9 2,3-Dihydrobenzofuran-2-carboxylic acid 2776555, abenzofuran compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1914-60-9,2,3-Dihydrobenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: To a mixture of 7 (1 eq) and 1,1?-carbodiimidazole (1.2 eq) in anhydrous THF was stirred for 1h then substituted aniline (0.9 eq) was added at room temperature. After stirring for 14 h, solvent was evaporated then the mixture acidified with 6N HCl to pH 2. The mixture was extracted with EtOAc (3 ¡Á 20 mL). The combined extracts were dried over anhydrous Na2SO4and the solvent was evaporated. After evaporation, the residue was purified by column chromatography (EtOAc/hexane = 1:3 – 1:50).

1914-60-9, 1914-60-9 2,3-Dihydrobenzofuran-2-carboxylic acid 2776555, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Choi, Minho; Jo, Hyeju; Park, Hyun-Jung; Sateesh Kumar, Arepalli; Lee, Joonkwang; Yun, Jieun; Kim, Youngsoo; Han, Sang-Bae; Jung, Jae-Kyung; Cho, Jungsook; Lee, Kiho; Kwak, Jae-Hwan; Lee, Heesoon; Bioorganic and Medicinal Chemistry Letters; vol. 25; 12; (2015); p. 2545 – 2549;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Analyzing the synthesis route of 1914-60-9

1914-60-9 2,3-Dihydrobenzofuran-2-carboxylic acid 2776555, abenzofuran compound, is more and more widely used in various.

1914-60-9, 2,3-Dihydrobenzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of 3a (0.30 g, 2.00 mmol) in THF and sat. aq NaHCO3 (1:1,12 mL) was stirred at r.t. and then TEMPO (59.1 mg, 0.38 mmol) and KBr (60.7 mg, 0.51 mmol) were added. A solution of aq NaOCl (2.5% w/v, 2 mL) was introduced in the reaction mixture. The mixture was stirred at r.t. for 3 h and then transferred to a separating funnel and treated with aq 1 N NaOH (25 mL). The aqueous layer was acidified with HCl (37% w/w) to pH 1 and extracted with CH2Cl2 (3 ¡Á 20 mL), dried (Na2SO4), filtered, and concentrated in vacuo. The crude acid was used in the next step. The crude acid was added to SOCl2 (2.90 mL, 40.00 mmol) at 60 C and kept for 6 h. The reaction mixture was then concentrated in vacuo. The mixture was diluted with Et2O (2 ¡Á 5 mL) and concentrated in vacuo again. The crude acid chloride was used in the next step. To a solution of the crude acid chloride in anhyd CH2Cl2 (5 mL) was added a solution of p-nitroaniline (1.10 g, 8.00 mmol) in anhyd CH2Cl2(10 mL) and the mixture was stirred at 50 C for 72 h. The crude mixture was concentrated in vacuo and purified by flash column chromatography (20% EtOAc in PE) to afford the desired product 1d; white solid; yield: 312.3 mg (55%); mp 109-112 C., 1914-60-9

1914-60-9 2,3-Dihydrobenzofuran-2-carboxylic acid 2776555, abenzofuran compound, is more and more widely used in various.

Reference£º
Article; Triandafillidi, Ierasia; Sideri, Ioanna K.; Tzaras, Dimitrios Ioannis; Spiliopoulou, Nikoleta; Kokotos, Christoforos G.; Synthesis; vol. 49; 18; (2017); p. 4254 – 4260;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Downstream synthetic route of 1914-60-9

1914-60-9, The synthetic route of 1914-60-9 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1914-60-9,2,3-Dihydrobenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

EXAMPLE 188; l-rfU-Dihydrobenzofuran-l-carbonvD-aminol-indan-l-carboxylic acid acid ethyl ester(188):To a 4OmL vial containing a stirring bar, 2,3-dihydro-l-benzofuran-2-carboxylic acid (0.4g, 2.44mmol) is charged with dry DCM (7mL). Stirring is initiated. HBTU (922mg, 2.43mmol) and the DIPEA (0.95mL, 8.0mmol) are added. The 2-aminoindane-2-carboxylic acid ethyl ester (500mg, 2.44mmol) is added. The reaction is allowed to stir for 16h. Analysis by tic of the reaction mixture (silica, 10% MeOH/DCM) indicates complete consumption of the starting amine. The contents of the reaction flask are diluted with EtOAc (5OmL) and transferred to a separatory funnel. This is washed consecutively with dilute aqueous NaHCO3 (25mL) and brine (25mL), dried over MgSO4, filtered and evaporated in vacuo to provide 1.47g of viscous yellow oil. This material is dissolved in 1OmL of DCM and purified utilizing an ISCO Companion with a 4Og cartridge of silica. The gradient is 15 % EtOAc in heptanes for 3 column volumes followed by a linear gradient to 50% over 8 column volumes and then 90 % EtOAc for 2 column volumes with a ramp of 1 column volume. 25mL fractions are159 collected. Fractions 3 through 6 are combined and evaporated in vacuo. Pumping to a constant weight gives amorphous white solid 0.68g.

1914-60-9, The synthetic route of 1914-60-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; SANOFI-AVENTIS; WO2008/151211; (2008); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem