Heterocyclic Building Block-benzofuran

23145-07-5, 5-Bromobenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A mixture of compound 2a,b (1.17 mmol), 4-hydroxyphenylboronicacid (3, 1.45 mmol, 200 mg), cesium carbonate (2.34 mmol, 0.763 g),and dichloro-[1,1?-bis[bis(1,1-dimethylethyl)phosphino]ferrocene-P,P?]palladium (0.059 mmol, 0.038 g) in a mixture of dimethoxyethane(15 mL) and distilled water (10 mL) was flushed with nitrogen andheated at 90 C under nitrogen overnight. Once the reaction completionwas confirmed using TLC, the reaction mixture was evaporated invacuo, and the residue was partitioned between water (20 mL) andethyl acetate (3¡Á20 mL). The combined organic layer extracts weredried over anhydrous sodium sulfate and evaporated in vacuo to dryness.They were used as such in the next steps.

23145-07-5, 23145-07-5 5-Bromobenzofuran 90015, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Zaraei, Seyed-Omar; El-Gamal, Mohammed I.; Shafique, Zainab; Amjad, Sayyeda Tayyeba; Afridi, Saifullah; Zaib, Sumera; Anbar, Hanan S.; El-Gamal; Iqbal, Jamshed; Bioorganic and Medicinal Chemistry; vol. 27; 17; (2019); p. 3889 – 3901;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.128851-73-0,6-Bromobenzofuran,as a common compound, the synthetic route is as follows.

General procedure: To a solution of substrate 1 (1.0 mmol, 1 equiv), NaSO2CF2Br (23.4 mg, 2.0 mmol, 2.0 equiv) in CH2Cl2 (7.0 mL) and CH3CN (3.5 mL) at room temperature was slowly added TBHP (5.0-6.0 M in decane, 1.4 mL, 7 equiv). The reaction was then stirred for 16 h. After the reaction was complete, the reaction mixture was concentrated under vacuum and the crude product was purified by column chromatography on silica gel to give the product.

128851-73-0, As the paragraph descriping shows that 128851-73-0 is playing an increasingly important role.

Reference£º
Article; Zhang, Jin; Xu, Xiu-Hua; Qing, Feng-Ling; Tetrahedron Letters; vol. 57; 22; (2016); p. 2462 – 2464;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4265-25-2,2-Methylbenzofuran,as a common compound, the synthetic route is as follows.

1.41 g of potassium hydroxide was sequentially added to a 200 mL autoclave.2.82g 2-methylbenzofuran, 30mL absolute ethanol,18 mg of metalloporphyrin tetrakis (o-chlorophenyl)iron porphyrin,Passing 2.0MPa of oxygen,The reaction was carried out at 130 C for 2 hours.The product is acidified, filtered,After recrystallization from hot water, benzofuran-2-carboxylic acid is obtained.The yield was 21.7%.

4265-25-2, 4265-25-2 2-Methylbenzofuran 20263, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Beijing University of Technology; Bai Jinquan; Li Xinghua; Wang Sinan; Zhang Yahuan; Xie Yabo; Li Jianrong; (5 pag.)CN109206388; (2019); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.24673-56-1,3-Methylbenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

Was added to the reaction Schlenk tube equipped with a magnetic stirring bar3-methylbenzofurancarboxylic acid 35.0 mg,Potassium carbonate 55.3 mg,1 mL of dichloromethane and 1 mL of dimethyl sulfoxide.The reaction was carried out by heating at 130 C for 5 hours under air conditions.After the reaction was completed, extraction with ethyl acetate three times, 10 mL each time, the combined organic phases were concentrated.36.6 mg of 2-methylbenzofurancarboxylic acid dichloromethyl ester was obtained.The yield was 71%., 24673-56-1

24673-56-1 3-Methylbenzofuran-2-carboxylic acid 600591, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Nanchang University; Cai Hu; Fu Zhengjiang; Wang Shuiliang; Jiang Yongqing; Huang Zhicong; (16 pag.)CN109369391; (2019); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.209256-42-8,2,3-Dihydrobenzofuran-4-carbaldehyde,as a common compound, the synthetic route is as follows.

209256-42-8, 2,3-dihydrobenzofuran-4-carbaldehyde (2.00 g, 13.5 mmol) was dissolved in dry MeOH (30 mL) and the solution cooled to 0 C. NaBH4 (510 mg, 13.5 mmol) was added and the solution stirred at room temperature for 1 hour. Ice water was added and the layers separated. The organicphase was evaporated in vacuo to yield the title compound as colourless crystalline solid (1.90 g, 94%).[00292] AnalpH2_MeOH_4MIN: Rt: 2.00 mm, mlz 151.3 [M+H]+

As the paragraph descriping shows that 209256-42-8 is playing an increasingly important role.

Reference£º
Patent; UNIVERSITY OF LEEDS; PHILIPPOU, Helen; FOSTER, Richard; FISHWICK, Colin; REVILL, Charlotte; YULE, Ian; TAYLOR, Roger; NAYLOR, Alan; FALLON, Philip, Spencer; CROSBY, Stuart; HOPKINS, Anna; GUETZOYAN, Lucie, Juliette; MACNAIR, Alistair, James; STEWART, Mark, Richard; WINFIELD, Natalie, Louise; (273 pag.)WO2019/186164; (2019); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

4265-16-1,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4265-16-1,Benzo[b]furan-2-carboxaldehyde,as a common compound, the synthetic route is as follows.

General procedure: To a solution of hydrazide (4, or 5 or 6) (0.2 g, 0.88 mmol) in absolute ethanol (7 mL) containing one drop of 37% hydrochloric acid, 0.88 mmol of corresponding alde-hyde derivative was added. The mixture was stirred at room temperature until TLC indicated the end of the reaction. The mixture was poured into ice and the precipitate was filtered out and dried. Flash chromatographic column was performed for purification of the final compounds, when necessary.

4265-16-1 Benzo[b]furan-2-carboxaldehyde 61341, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Carneiro, Teiliane R.; do Amaral, Daniel N.; Fokoue, Harold H.; Sant?Anna, Carlos M. R.; Porras, Maria L. G.; Oliveira, Augusto C. A.; Cavalcanti, Bruno C.; Pessoa, Claudia; Barreiro, Eliezer J.; Lima, Lidia M.; Letters in drug design and discovery; vol. 15; 7; (2018); p. 778 – 786;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

28418-88-4, 4-Iodoisobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

3-Iodophthalic anhydride (598 mg, 2.18 mmol) was dissolved in DMF (14 mL), and the solution was added with an aqueous solution (10 mL) of hexamethyldisilazane (HMDS) (4.6 mL, 22 mmol) and methanol (0.44 mL, 11 mmol), followed by stirring at room temperature for 18.5 hours. The reaction mixture was added with water and extracted with ethyl acetate. The organic layer was washed with saturated brine and dried over anhydrous sodium sulfate. The solvent was evaporated under reduced pressurea and the residue was purified by slurry using chloroform to obtain 3-iodophtalimide (403 mg, yield 68%). APCI-MS m/z: 272 [M-H]-; 1H-NMR (DMSO-d6)delta(ppm): 7.53 (dd, J = 7.4, 7.8 Hz, 1H), 7.84 (dd, J = 0.6, 7.3 Hz, 1H), 8.22 (dd, J = 0.6, 7.8 Hz, 1H), 11.52 (br s, 1H).

28418-88-4, As the paragraph descriping shows that 28418-88-4 is playing an increasingly important role.

Reference£º
Patent; Kyowa Hakko Kirin Co., Ltd.; EP2108642; (2009); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.127264-14-6,5-(2-Bromoethyl)-2,3-dihydrobenzofuran,as a common compound, the synthetic route is as follows.

Example 15:Preparation of (S)-2,2-diphenyl-2-{l-[2-(2,3-dihydrobenzofuran-5yl)-ethyl]- pyrrolidin-3yl} acetic acid methyl ester: A mixture of 3-(S)-2,2-diphenyl-2-pyrrolidinyl-3yl-acetic acid methyl ester(29.5 grams), 5-(2-bromoethyl)2,3-dihydrobenzo[2,3-b]furan (22.7 grams), anhydrous potassium carbonate (27.6 grams) and acetonitrile (300 ml) was heated to reflux and stirred for 60 min. The mixture was partitioned between methylene chloride (250 ml) and 10percent aqueous potassium carbonate (250 ml). The two layers were separated and the aqueous layer was extracted with methylene chloride. The organic layer was dried with sodium sulphate and distilled off the organic layer under reduced pressure followed by triturating with ethyl acetate to get the title compound. Yield: 30.5 grams

127264-14-6, As the paragraph descriping shows that 127264-14-6 is playing an increasingly important role.

Reference£º
Patent; SATYANARAYANA REDDY, Manne; THIRUMALAI RAJAN, Srinivasan; VENKATESH, Mummadi; WO2008/126106; (2008); A2;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

28418-88-4, 4-Iodoisobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

28418-88-4, SYNTHESIS EXAMPLE 7-1 To a solution of 3-iodophthalic anhydride (32.5 g) in dimethylformamide (300 mL), a solution of (2S)-1-(methylthio)propan-2-amine (15.0 g) in dimethylformamide (50 mL) was added dropwise at -10 C. for 3 hours, and the mixture was stirred at -10 C. for additional 3 hours. After addition of 40% sodium hydroxide aqueous solution (15 g), the solvent was distilled off under reduced pressure, and the crude product was dissolved in water (500 mL) and washed with diisopropyl ether. The water phase was separated, adjusted to pH 1 with concentrated hydrochloric acid and extracted with diisopropyl ether. The organic phase was washed with saturated brine and dried over anhydrous sodium sulfate. The solvent was distilled off, and the resulting crude crystal was washed with a small amount of diisopropyl ether and air-dried to obtain 3-iodo-2-{[(1S)-1-methyl-2-(methylthio)ethyl]-carbamoyl}benzoic acid (32.2 g). Melting point: 132-134 C.

28418-88-4 4-Iodoisobenzofuran-1,3-dione 282071, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Bayer CropScience AG; US2011/184188; (2011); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.54008-77-4,2-Bromobenzofuran,as a common compound, the synthetic route is as follows.

54008-77-4, To a solution of tert-butyl 4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)benzoate (1.0 g, 3.3 mmol), 2-bromobenzofuran (0.64 g, 3.3 mmol) and tetrakis(triphenylphosphine) palladium(0) (0.5 g, 0.4 mmol) in a mixed solution of 1,4-dioxane (20 mL) and water (2.0 mL) was added sodium carbonate (1.0 g, 7.2 mmol). The reaction mixture was stirred at 90 C. under nitrogen for 12 hours. After the reaction, it was allowed to cool to room temperature, and concentrated in vacuo, then diluted with ethyl acetate (100 mL), washed with water (100 mL). The organic phase was dried over anhydrous sodium sulfate and filtered. The filtrate was concentrated and the residue was purified by column chromatography (silica gel, ethyl acetate/petroleum ether=1:20) to give the pure product tert-butyl 4-(benzofuran-2-yl)benzoate as a white solid (0.65 g, 67%). 1H NMR (300 MHz, CDCl3): delta 8.06 (d, J=8.7 Hz, 2H), 7.90 (d, J=8.4 Hz, 2H), 7.62-7.53 (m, 2H), 7.32-7.25 (m, 2H), 7.14 (s, 1H), 1.62 (s, 9H).

54008-77-4 2-Bromobenzofuran 2776264, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Constellation Pharmaceuticals, Inc.; Albrecht, Brian K.; Audia, James Edmund; Cook, Andrew S.; Gagnon, Alexandre; Harmange, Jean-Christophe; Nasveschuk, Christopher G.; US9206128; (2015); B2;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem