Month: August 2020

77095-51-3, Benzofuran-6-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

g) A mixture of 0.25 mmol of compound 1.11 and 0.26 mmol of HATU in 1 mmol of DIEA and 2 mL of DMF was stirred at room temperature for 30 min, followed by adding a solution of 0.22 mmol of compound 1.5 in 1 mL of DMF. The resulting mixture was stirred 45C for 12 hours. The solvent was removed, and the residue was purified to give compound 1. 6 in 50-65% yield. Subsequently, compound 1.6 was hydrolyzed with LiOH (1.0 M aqueous, 0.5 mL) in THF (3 mL) for 2 hours. The rexaction mixture was then acidified with HCl (aqueous), extracted with ethyl acetate (50 mL), dried over anhydrous magnesium sulfate and concentrated to give compound 1 in quantitative yield NMR (400 MHz, CD3OD) : 8 7.91 (s, 1H), 7.75 (d, J= 8.0 Hz, 1H), 7.67 (s, 3H), 7.36 (d, J= 8. 0 HZ, 1H), 7.13 (s, 1H), 6.96 (s, 1H), 5.01 (t, J= 6.8 Hz, 1H), 4.68 and 4.89 (m, 2H), 3.85 (d, J= 6. 8 Hz, 2H), 3.70 and 4.02 (m, 2H), 2.93 (m, 2H) ppm; ESI-MS (m/z) : (milz 586.10.

As the paragraph descriping shows that 77095-51-3 is playing an increasingly important role.

Reference£º
Patent; SUNESIS PHARMACEUTICALS, INC.; WO2005/44817; (2005); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.16859-59-9,3-Hydroxyisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

General procedure: 2-Formylbenzoic acid (1a; 1.0 equiv) and DMAP (0.1 equiv) were dis-solved in CH2Cl2 (0.15 M), producing a colorless clear solution. Thedesired carboxylic anhydride (2.0 equiv) and triethylamine (1.0equiv) were subsequently added and the reaction mixture was stirredat r.t. until complete conversion of the starting material was achieved(monitored by TLC). The solvent was removed under reduced pres-sure and the crude products were purified by column chromatogra-phy (n-hexane/EtOAc, 2:1).

As the paragraph descriping shows that 16859-59-9 is playing an increasingly important role.

Reference£º
Article; Niedek, Dominik; Schuler, Soeren M.M.; Eschmann, Christian; Wende, Raffael C.; Seitz, Alexander; Keul, Felix; Schreiner, Peter R.; Synthesis; vol. 49; 2; (2017); p. 371 – 382;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.128851-73-0,6-Bromobenzofuran,as a common compound, the synthetic route is as follows.

General procedure: Aryl-halide (0.2 mmol, 1 equiv.), Ir(dtbbpy)(ppy)2PF6 (1.8 mg, 0.002 mmol, 1 mol %), NiI2 (3.1 mg, 0.01mmol, 5 mol %), DMSO (2.0 mL) was added to a 10 mL schlenk flask equipped with a magnetic stirrerbar. This resulting mixture was sealed and degassed via vacuum evacuation and subsequent backfill with ethylene for three times. Then, N,N,N?,N?-tetramethylethylenediamine, TMEDA (60 muL, 2 equiv.)and N,N-diisopropylethylamine, DIPEA (70 muL, 2 equiv.) were subsequently added in this order. The solution was gently bubbled with ethylene balloon for approximately 30 seconds. The solution was then taken up into a 8 mL stainless steel syringe pre-purged with argon, and quickly assembled onto thestop-flow micro tubing, SFMT setup. Solution was pumped into the SFMT at 400 muL/min while maintaining approximately 1:1 gas-liquid slug flow at 250 PSI. Filled SFMT was then irradiated with blueLED (2 meter strip, 18 W) in a 100oC oil bath for 24 hours. The SFMT was wash with DCM (8 mL) and subjected to GC analysis (Figure S5). Then water (30 mL) was added to reaction mixture and extracted with DCM (10 mL) three times. Combined organic layer was successively wash with brine three timesand dried over Na2SO4 and concentrated under reduced pressure. The residue was then subjected to flash column chromatography to yield the product as a mixture of meso/dl isomers (which could not be separated by column chromatography).

As the paragraph descriping shows that 128851-73-0 is playing an increasingly important role.

Reference£º
Article; Li, Jiesheng; Luo, Yixin; Cheo, Han Wen; Lan, Yu; Wu, Jie; Chem; vol. 5; 1; (2019); p. 192 – 203;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

610-93-5, 6-Nitroisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of compounds 12 (10 mmol) and 10% (mass fraction) Pd/C (0.20 g) in MeOH (20 mL) was subjected to standard hydrogenolysis condition at atmospheric pressure (balloon) and room temperature. The progress of the reaction was monitored by TLC. After completion of the reactions, the reaction mixture was filtered off and the filtrate was evaporated on a rotary evaporator to afford the crude products 13, which were used directly in the next step without further purification. Yield: 87%, Mp: 186-187 C. 1H-NMR (CDCl3, 600 MHz), d: 7.28(s, 1H, ArH), 7.11-7.07(m, 1H, ArH), 7.05(dd, J = 8.1Hz, 2.1Hz, 1H, ArH), 5.25(s, 2H), 3.95(s, 2H, NH2). 5110 X. Hu et al. 123

The synthetic route of 610-93-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Hu, Xia-min; Cui, Zhi-wen; Dong, Wei; Zhu, Yue; Gao, Cheng-zhi; Xu, Shi-qiang; Yuan, Qiong; Yu, Zhi-jun; Min, Zhen-li; Research on Chemical Intermediates; vol. 44; 9; (2018); p. 5107 – 5122;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

69604-00-8, Ethyl 5-nitrobenzofuran-2-carboxylate is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

20.0g of ethyl 5-nitrobenzofuran-2-carboxylate prepared in Example 2 was added into a reaction flask, 300ml of ethanol was added, 2g of 5% Pd on carbon was added, the mixture was replaced with hydrogen twice, and the hydrogen pressure was controlled to 0.3 -0.5MPa, 10-30 hydrogenation reaction for 3 hours, the reaction was completed, filtered and the filtrate was concentrated under reduced pressure to give dry 5-aminobenzofuran-2-carboxylic acid ethyl ester 17.1g, yield 98%.

The synthetic route of 69604-00-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; (8 pag.)CN107674052; (2018); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

59434-19-4, 4-Aminophthalide is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of 4-aminoisobenzofuran-1(3H)-one (298 mg, 2 mmol) and 4-(diethoxymethyl)benzaldehyde (1.04 g, 5 mmol) in ethyl propionate (15 mL) was cooled to 0 C. A solution of sodium methoxide in methanol [sodium (184 mg, 8 mmol) in methanol (15 mL)] was then added dropwise. After the addition, the mixture was stirred at 25 C. for 16 hr. The mixture was quenched with water (10 mL) and solvent was removed in vacuum. The residue was dissolved in water, and then extracted with ethyl acetate (50 mL¡Á3). The combined organic layers were washed with brine, dried over anhydrous sodium sulfate, and concentrated to give crude product. The crude product was purified by chromatography (silica gel, petroleum ether/ethyl acetate=100:1 to 10:1) to give methyl 2,3-bis(4(-(diethoxymethyl)phenyl)-4-oxo-1,2,3,4-tetrahydroquinoline-5-carboxylate and ethyl 2,3-bis(4(-(diethoxymethyl)phenyl)-4-oxo-1,2,3,4-tetrahydroquinoline-5-carboxylate (240 mg together, yield 21%) as a light yellow solid. LC-MS (ESI) m/z: 562(M+1)+(methyl 2,3-bis(4(-(diethoxymethyl)phenyl)-4-oxo-1,2,3,4-tetrahydroquinoline-5-carboxylate); 576(M+1)+(ethyl 2,3-bis(4(-(diethoxymethyl)phenyl)-4-oxo-1,2,3,4-tetrahydroquinoline-5-carboxylate)

As the paragraph descriping shows that 59434-19-4 is playing an increasingly important role.

Reference£º
Patent; LEAD THERAPEUTICS, INC.; US2010/35883; (2010); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

128851-73-0, 6-Bromobenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a mixture of 6-bromobenzofuran ( 1.0 g, 5.1 mmol) in tetrahydrofuran (15 mL) was added magnesium (0.19 g, 7.6 mmol) and 1,2-dibromoethane (95 mg, 0.51 mmol). The mixture was stirred at 70 C for 2 hours, and then the reaction was stirred at -40 C under carbon dioxide gas overnight. On completion, the mixture was poured into water and washed with ethyl acetate. The aqueous phase was adjusted to pH=5.0 with hydrochloric acid, resulting in formation of a solid. The solid was collected by filtration and dried in vacuo to give compound B-128 (0.20 g, 24% yield) as a yellow solid.

The synthetic route of 128851-73-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; FORUM PHARMACEUTICALS, INC.; ACHARYA, Raksha; BURNETT, Duane, A.; BURSAVICH, Matthew, Gregory; COOK, Andrew, Simon; HARRISON, Bryce, Alden; KOENIG, Gerhard; MCRINER, Andrew, J.; (400 pag.)WO2016/100184; (2016); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

174775-48-5, Ethyl 5-aminobenzofuran-2-carboxylate is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: An oven-dried Schlenk tube (A) equipped with a magnetic stir bar was charged with AgF (132.2 mg, 1.05 mmol, 3.5 equiv), sealed with a septum, and degassed by alternating vacuum evacuation and nitrogen backfill (three times) before freshly distilled EtCN (3 mL)was added. To the resulting suspension, which was precooled to -78 C (dry ice-acetone bath), was added TMSCF3 (149.3 mg, 1.05 mmol, 3.5 equiv) by microsyringe. The mixture was allowed towarm to r.t. and stirring was continued for an additional 15 min. In due course, AgF solid dissolved and a gray, dark solution of [Ag-CF3] formed. Another Schlenk tube (B) equipped with a magnetic stir bar was charged with the aniline (ArNH2; 0.30 mmol, 1.0 equiv) in freshly distilled EtCN (1.5 mL). To the resulting solution, which was precooled to 0 C (ice bath), aq HCl (12 M; 50.0 muL, 0.60mmol, 2.0 equiv) was added; precipitate formed immediately. After 5 min stirring, t-BuONO (37.7 mg, 0.33 mmol, 1.1 equiv) was added by microsyringe, and the mixture was allowed to stir at 0 C for 15 min. The resulting suspension in Schlenk tube (B) was degassed by alternating vacuum evacuation at -196 C (liquid nitrogen), then the solution was allowed to warm to r.t. under a nitrogen atmosphere (three times), and finally cooled to -78 C (dry ice-acetone bath). The gray, dark solution of [AgCF3] in Schlenk tube (A), which was precooled to -78 C (dry ice-acetone bath), was added to Schlenk tube (B) (ArN2+Cl-) by syringe at -78 C (dry ice-acetone bath) over a period of 1 h. After the addition was complete, the reaction mixture was stirred for 3 h at -78 C (dry ice-acetone bath), allowed to warm to r.t., and stirring was continued for an additional 1 h. An off-white precipitate was observed, and the reaction mixture was diluted with EtOAc (3 mL) and filtered through a short silica gel column. The solvent was removed under reduced pressure with a rotatory evaporator, and the crude residue was purified by silica gel column chromatography to give the desired trifluoromethylation product 3. The yields of products 3a, 3f, 3g, 3l, 3o, 3r, 3x, and 3zb are based on the 19F NMR spectra with 4-F3COC6H4OMe as internal standard. Analytical data for the representative product ethyl 4-(trifluoromethyl)benzoate (3i) are provided below. Data for other products can be found in the literature.

#N/A

Reference£º
Article; Wang, Xi; Xu, Yan; Zhou, Yujing; Zhang, Yan; Wang, Jianbo; Synthesis; vol. 46; 16; (2014); p. 2143 – 2148;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.77095-51-3,Benzofuran-6-carboxylic acid,as a common compound, the synthetic route is as follows.

An oven-dried flask was charged with 2 (40 mg, 0.103 mmol), EDC.HCl (29.5 mg, 0.154 mmol), DMAP (18.8 mg, 0.154 mmol), and the appropriate acid (0.154 mmol). To the flask was added CH2CI2 (8 mL). After stirring overnight at RT the reaction was quenched with HC1 (1 M, 8 mL) and the organic layer rinsed sequentially with saturated NaHCCh (8 mL) and brine (8 mL) then dried over NarSOu The solvent was removed in vacuo and the resulting residue purified by flash column chromatography (?FCC?) eluting with 30-35% EtOAc/Pent. Compounds <95% pure as indicated by HPLC were further purified by reverse phase semi -preparatory HPLC. 77095-51-3 Benzofuran-6-carboxylic acid 17867234, abenzofuran compound, is more and more widely used in various. Reference£º
Patent; UNIVERSITY OF KANSAS; VICTORIA LINK LIMITED; PRISINZANO, Thomas E.; CROWLEY, Rachel Saylor; DAKEN, Bronwyn Maree; (56 pag.)WO2019/99588; (2019); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7169-34-8,Benzofuran-3(2H)-one,as a common compound, the synthetic route is as follows.

General procedure: A mixture of benzofuran-3(2H)-one (2.0 mmol), benzaldehyde (2.2mmol) and water (5 mL) was stirred at reflux temperature for 6-10 h. Completion of the reaction was checked on TLC. Then the mixture was allowed to rt and stirred for 1 h. The precipitated solids were filtered, washedwith water (2 ¡Á 5 mL) and dried to give the product.

The synthetic route of 7169-34-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Venkateswarlu, Somepalli; Murty, Gandrotu Narasimha; Satyanarayana, Meka; Arkivoc; vol. 2017; 4; (2017); p. 303 – 314;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem