Day: August 18, 2020

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.64169-34-2,5-Bromoisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

[0177] To a mixture of 5-bromo-2-benzofuran-1(3H)-one (2.0 g, 9.4 mmol) and NBS (2.2 g, 12 mmol) was addedtrifluoromethanesulfonic acid (10 ml) and the mixture was heated to 60 C for 16 hours. TLC showed two new spots,along with some unreacted SM. MPLC purification provided 4,5-dibromo-2-benzofuran-1(3H)-one. LC-MS (IE, m/z): 292[M + 1]+.

64169-34-2 5-Bromoisobenzofuran-1(3H)-one 603144, abenzofuran compound, is more and more widely used in various.

Reference£º
Patent; Merck Sharp & Dohme Corp.; WALSH, Shawn; PASTERNAK, Alexander; CATO, Brian; FINKE, Paul, E.; FRIE, Jessica; FU, Qinghong; KIM, Dooseop; PIO, Barbara; SHAHRIPOUR, Aurash; SHI, Zhi-Cai; TANG, Haifeng; (136 pag.)EP2755656; (2016); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13391-28-1,5-Methoxybenzofuran,as a common compound, the synthetic route is as follows.

To a stirred solution of 5-methoxybenzofuran (1) (0.50 g, 3.38 mmol) in dichloromethane (15 mL), boron tribromide (16.87 mL, 16.87 mmol, IM solution in dichloromethane) was added slowly at O0C. The reaction mixture was warmed to room temperature and stirred for 4 hours. The reaction mixture was then cooled to O0C, quenched with aqueous saturated NaHCO3 solution and extracted with dichloromethane (3 x 50 mL). The combined organic extracts were washed with brine (25 mL), dried over Na2SO4, and concentrated under reduced pressure to give compound (2) as an off white solid (300 mg) which was used in the next step without further purification. 1H NMR (400 MHz, CHLOROFORM-J) delta: 7.59 (d, J=I.95 Hz, 1 H), 7.35 (d, J=8.59 Hz, IH), 7.00 (d, J=2.73 Hz, IH), 6.80 (dd, 8.59, 2.74 Hz, IH), 6.67 (m, IH), 4.66 (s, IH)

The synthetic route of 13391-28-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ASTRAZENECA AB; BJOeRK, Seth; DELISSER, Vern; JOHNSTROeM, Peter; NILSSON, Nils Anders; RUDA, Katinka; SCHOU, Per Magnus; SWAHN, Britt-Marie; WO2010/24769; (2010); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.10242-11-2,5-Bromobenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

Example 9b: 5-cyanobenzofuran-2-carboxylic acid5-Bromobenzofuran-2-carboxylic acid (482 mg, 2 mmol) and CuCN (213 mg, 2.4 mmol) were suspended in NMP (lOmL). The reaction was irradiated using a microwave at 200C for 20 minutes. The reaction mixture was dissolved in ethyl acetate and washed with water and brine. The organic layer was evaporated under vacuum. The product was purified using Varian HPLC (10%-95% ACN in H20: 25 minute gradient). The combined fractions were concentrated under vacuum to give the title compound (115 mg).

10242-11-2 5-Bromobenzofuran-2-carboxylic acid 735247, abenzofuran compound, is more and more widely used in various.

Reference£º
Patent; SENOMYX, INC.; TACHDJIAN, Catherine; LI, Xiaodong; KARANEWSKY, Donald S.; FOTSING, Joseph; PATRON, Andrew; DARMOHUSODO, Vincent; SELCHAU, Victor; CHING, Brett; WO2011/159781; (2011); A2;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.69999-16-2,2,3-Dihydrobenzofuranyl-5-acetic acid,as a common compound, the synthetic route is as follows.

Preparation 16 Preparation of 5-(2-hydroxyethyl) -2,3-dihydrobenzofuran A solution of (2,3-dihydrobenzofuran-5-yl)acetic acid (4.9 g – see EP-A-132130) in anhydrous tetrahydrofuran (50 ml) was added dropwise over 10 minutes to a stirred suspension of lithium aluminium hydride (1.57 g) in anhydrous tetrahydrofuran (50 ml) at 0C. The mixture was allowed to warm to room temperature and stirred for 1 hour. water (1.5 ml) was cautiously added dropwise followed by 10% aqueous sodium hydroxide (1.5 ml) and, finally, water (4.5 ml). The mixture was filtered and the inorganic salts washed with ethyl acetate (2 x 50 ml). The filtrate and washings were combined and concentrated in vacuo to give the title compound as an oil, yield 3.3 g. 1H-N.M.R. (CDCl3 delta = 7.10 (s, 1H); 7.00 (d, 1H); 6.75 (m, 1H); 4.65-4.55 (m, 2H); 3.90-3.75 (m, 2H); 3.30-3.15 (m, 2H); 2.90-2.80 (m, 2H); 1.85-1.75 (brs, 1H) ppm.

As the paragraph descriping shows that 69999-16-2 is playing an increasingly important role.

Reference£º
Patent; Pfizer Limited; PFIZER INC.; EP505377; (1996); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

28418-88-4, 4-Iodoisobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1.19 g of 1,1-dimethyl-2-methylthioethylamine compound of formula III was dissolved in 10 ml of acetonitrile.Under ice bath, it was added dropwise to a solution of 2.74 g of 3-iodophthalic anhydride compound of formula II and 10 ml of acetonitrile.Reacting at room temperature for 3 hours,The acetonitrile was distilled off under reduced pressure, and then 30 ml of toluene was added to the reaction flask to dissolve the residue.Then added dropwise to 3.15 g of trifluoroacetic anhydride,React at room temperature for 1 hour,After distilling off toluene under reduced pressure,A yellow oily liquid is obtained as a compound of formula IV.

The synthetic route of 28418-88-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; East China University of Science and Technology; Cao Song; Zhao Xianghu; He Jingjing; Li Jialu; Liu Yisen; Li Chunmei; Xu Sixue; Huang Qingchun; (19 pag.)CN110272361; (2019); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7169-34-8,Benzofuran-3(2H)-one,as a common compound, the synthetic route is as follows.

General procedure: Coumaranone (1.00mmol) and aldehyde (1.00mmol) were combined in a dry microwave vial. 1ml of the deep eutectic solvent formed from a 1:2M ratio of choline chloride and urea was added. The reaction mixture was heated to 90C in a CEM Discover microwave with stirring for 30min. At this point, the reaction was cooled to room temperature and partitioned between water and methylene chloride. The organic layer was separated and concentrated to dryness in vacuo. Further purification was performed as noted.

7169-34-8 Benzofuran-3(2H)-one 23556, abenzofuran compound, is more and more widely used in various.

Reference£º
Article; Park, Hyo S.; Nelson, David E.; Taylor, Zachary E.; Hayes, James B.; Cunningham, Kirsten D.; Arivett, Brock A.; Ghosh, Rajarshi; Wolf, Larissa C.; Taylor, Kimberley M.; Farone, Mary B.; Handy, Scott T.; Farone, Anthony L; International Immunopharmacology; vol. 43; (2017); p. 116 – 128;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

27550-59-0, 5-Hydroxyisobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

6th Stage: 4-[11-(acryloyl-methyl-amino)-undecyloxy]phthalic Acid (AAUPA) (0095) (0096) 4-hydroxyphthalic anhydride (6.70 g; 40.8 mmol), BHT (10 mg) and N-(11-bromoundecyl)-N-methyl acrylamide (13.00 g; 40.8 mmol) were dissolved in N,N-dimethylformamide (100 ml). Potassium carbonate (5.64 g; 40.8 mmol) was added. The yellow suspension was stirred at RT. Water (200 ml) was added to the reaction mixture after 20 d and the whole stirred for 1 h at RT. An oily white solid precipitated from the initially cloudy solution. The solvent was decanted off. The residue was dissolved in dilute aqueous Na2CO3 solution (5%; 100 ml). The milky/cloudy aqueous phase was washed with MtBE (5¡Á100 ml). Diluted hydrochloric acid (2N, 100 ml) was added to the water phase (pH=1) and extraction with MtBE (8¡Á100 ml) took place. The combined extracts were dried over Na2SO4, filtered and concentrated on the rotary evaporator. Chloroform (150 ml) was added to the residue and the whole stirred at RT. After 20 h the suspension was filtered. The filtration residue was washed with chloroform (50 ml) and discarded. The filtrate was concentrated on the rotary evaporator. The residue was dissolved in chloroform (50 ml). Acetonitrile (50 ml) was added. After 72 h storage at -18 C. the solvent was decanted off and the residue dried under a fine vacuum. 3.84 g (9.2 mmol; 22% yield) of a white solid was obtained (melting point: 95 C.), which dissolves very well e.g. in ethanol or acetone. (0097) 1H-NMR (DMSO-d6, 400 MHz): delta (2 isomers)=1.15-1.35 (m, 12H), 1.36-1.50 (m, 4H), 1.68-1.75 (m, 2H), 2.86 (s, 1.7H), 3.00 (s, 1.3H), 3.29-3.36 (m, 2H), 4.04 (t, 2H; J=6.4 Hz), 5.61-5.65 (m, 1H), 6.06-6.13 (m, 1H), 6.72 (dd, 1H; J=10.7 Hz, 16.9 Hz), 7.03-7.08 (m, 2H), 7.73 (d, 1H; J=8.4 Hz), 12.89 (br, 2H). (0098) 13C-NMR (DMSO-d6, 100 MHz): delta=24.3, 24.8, 25.2, 25.5, 27.3, 27.5, 27.6, 27.7, 27.8, 27.9, 32.2, 33.7, 45.8, 47.8, 66.9, 112.3, 114.2, 121.3, 125.6, 127.2, 127.6, 130.1, 136.0, 159.7, 164.0, 166.2, 168.1.

The synthetic route of 27550-59-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Ivoclar Vivadent AG; Bock, Thorsten; Fischer, Urs Karl; Lamparth, Iris; Moszner, Norbert; Rheinberger, Volker; (9 pag.)US9393181; (2016); B2;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.52010-22-7,4-Chlorophthalide,as a common compound, the synthetic route is as follows.

A 45.85 g sample of an oxidation mixture in acetic acid from the oxidation of 3- and 4-chloroxylene in the presence of a catalyst composition comprising cobalt and manganese was treated with 0.143 g. of oxalic acid dihydrate and brought to reflux for 30 minutes (this process removed about 90% of the cobalt and >50% of the manganese by precipitation as the oxalate salts). The solution was then passed through a glass frit under vacuum. The remainder of the solvent was removed by evaporation (down to 16.2 g.) and distillation (down to 14.0 g. residue). The remaining light yellow solid was combined with 60 ml. of water and 40 ml. of toluene, and mixed. There was some emulsion layer which was treated in a second wash with an additional 15 ml. each of water and toluene. The solvent was removed by evaporation of each fraction to leave 10.6 g. in the water fraction and 2.7 g. in the toluene fraction. The fractions were analyzed by GC. The analytical results are shown in Table 7.

The synthetic route of 52010-22-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; General Electric Company; US6670487; (2003); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.37418-88-5,4-Hydroxyisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

A mixture of 3-hydroxyphthalic anhydride (543 mg, 3.31 mmol), 4-methoxybenzylamine (0.43 mL, 3.31 mmol) and acetic acid (3 mL) was heated at 1000C for 4 hours. The mixture was allowed to cool and diluted with water (20 mL). The white solid was collected by filtration, washed well with water and dried to give the title compound (760 mg, 81 percent). 1H NMR (DMSOd6) 11.03 (1H, s), 7.61 (1H, dd), 7.28 (1 H, d), 7.23-7.19 (3H, m), 6.89-6.86 (2H, m), 4.63 (2H, s), 3.71 (3H, s). MS: [M-H+] 282.

As the paragraph descriping shows that 37418-88-5 is playing an increasingly important role.

Reference£º
Patent; ASTEX THERAPEUTICS LIMITED; WO2008/44029; (2008); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.496-16-2,2,3-Dihydrobenzo[b]furan,as a common compound, the synthetic route is as follows.

A mixture of 44.4 g (0.37 moles) of 2,3-dihydrobenzofuran and 37.8 g (0.37 moles) of acetic anhydride were added with 5.0 g (37 mmoles) of anhydrous zinc chloride. The mixture was heated to 95-105 0C for 10 hrs; after cooling to room temperature the mixture is added with 50 ml of water and 50 ml of dichloromethane. The organic phase was separated and the aqueous phase was extracted twice with dichloromethane (2x 30 ml). The organic phases were collected together, and washed with 50 ml of a saturated aqueous solution of sodium carbonate. The organic phase was separated and evaporated u.v. (20 ¡ãC/21 mbar). The residue was then distilled at 99-100 ¡ãC/0.08 mbar obtaining 14.5 g (0.089 moles) of 5-acetyl-2,3- dihydrobenzofuran. 1H NMR (400 MHz; CDCI3): delta: 2.50 (s, 3H); 3.20 (t, 2H, J = 8.7 Hz); 4.64 (t, 2H, J = 8.7 Hz); 6.76 (d, 1 H, J = 8.4 Hz); 7.76 (m, 1 H); 7.81 (m, 1 H).13C-NMR (CDCI3, 100MHz): delta: 26.22; 28.79; 72.02; 108.72; 125.34; 127.50; 130.17; 130.48; 164.19; 196.41.

As the paragraph descriping shows that 496-16-2 is playing an increasingly important role.

Reference£º
Patent; ENDURA S.P.A.; ROTHAMSTED RESEARCH LTD.; BORZATTA, Valerio; CAPPARELLA, Elisa; MORONI, Leni; MOORES, Graham; PHILIPPOU, Despina; WO2011/20848; (2011); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem