Category: benzofuran

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.37418-88-5,4-Hydroxyisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

4-hydroxyisobenzofuran-1,3-dione (148.99 mg, 0.907 mmol, 1 eq) was added to (S)-3-amino-3- methylpiperidine-2,6-dione hydrochloric acid (128.97 mg, 0.907 mmol, 1 eq). Pyridine (3.628 ml, 0.25 M) was then added to the mixture and it was stirred at 110 ¡ãC for 17 hours. The mixture was diluted with methanol and was condensed under reduced pressure. The crude material was purified by column chromatography (ISCO, 24 g silica column, 0 to 10percent MeOH/DCM 25 minute gradient) to give a white oil (150 mg, 57.4 percent yield).1H NMR (400 MHz, DMSO-d6) delta 10.95 (s, 1H), 7.62 (dd, J = 8.4, 7.2 Hz, 1H), 7.27- 7.16 (m, 2H), 2.75- 2.62 (m, 1H), 2.55 (dd, J = 14.0, 4.3 Hz, 1H), 2.05- 1.96 (m, 1H), 1.86 (s, 3H). LCMS 289 (M+H).

37418-88-5, 37418-88-5 4-Hydroxyisobenzofuran-1,3-dione 96580, abenzofuran compound, is more and more widely used in various fields .

Reference£º
Patent; DANA-FARBER CANCER INSTITUTE, INC.; BUCKLEY, Dennis; WINTER, Georg; PHILLIPS, Andrews, J.; HEFFERNAN, Timothy, P.; BRADNER, James; ROBERTS, Justin; BEHNAM, Nabet; (544 pag.)WO2018/148443; (2018); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.127264-14-6,5-(2-Bromoethyl)-2,3-dihydrobenzofuran,as a common compound, the synthetic route is as follows.

5-(2-Bromoethyl)benzo[2,3-b]furan (17.2 g) was added to the mixture of 3-(S)- (+)-( 1 -carbamoyl- 1 , 1 -diphenylmethyl)pyrrolidine.L-(+)-tartrate (25 g), potassium hydroxide (11.4 g) in acetonitrile solvent at 25-35¡ã C. Reaction mass was heated to 40- 45¡ã C and maintained up to completion of the reaction . The reaction mass was then cooled to R.T and extracted with dichloromethane, the solvent distilled off under vacuum to give residue. Acetone was added to the residue and cooled to 10-15¡ã C. Hydrobromic acid was added to the above solution and heated to 20-25¡ã C and maintained for 10-12 hours. The reaction mass is filtered to give darifenacin hydrobromide., 127264-14-6

The synthetic route of 127264-14-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MATRIX LABORATOIRES LIMITED; WO2009/125430; (2009); A2;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4265-16-1,Benzo[b]furan-2-carboxaldehyde,as a common compound, the synthetic route is as follows.

General procedure: An aldehyde (3.24 mmol) was dissolved in EtOH (12 mL), then a solution of NH2OH*HCl (360 mg, 5.18 mmol) and Na2CO3 (247 mg,2.33 mmol) in water (3 mL) was added, and the mixture was boiled at reflux temp for 20 min. Saturated aqueous NaCl solution (30 mL)was added, and the mixture was extracted by EtOAc (2 20 mL).The combined organic layers were dried (MgSO4) and evaporated to give the expected aldoxime which was used without further purification.

4265-16-1, 4265-16-1 Benzo[b]furan-2-carboxaldehyde 61341, abenzofuran compound, is more and more widely used in various.

Reference£º
Article; Goyard, David; Konya, Balint; Chajistamatiou, Aikaterini S.; Chrysina, Evangelia D.; Leroy, Jeremy; Balzarin, Sophie; Tournier, Michel; Tousch, Didier; Petit, Pierre; Duret, Cedric; Maurel, Patrick; Somsak, Laszlo; Docsa, Tibor; Gergely, Pal; Praly, Jean-Pierre; Azay-Milhau, Jacqueline; Vidal, Sebastien; European Journal of Medicinal Chemistry; vol. 108; (2016); p. 444 – 454;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

6296-53-3, N-(1,3-Dioxo-1,3-dihydroisobenzofuran-4-yl)acetamide is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

6296-53-3, [0110j A stirred solution of 1 -(3 -ethoxy-4-methoxyphenyl)-methylsulfonylethylamine (1.0 g, 3.7 mmol) and 3-acetamidophthalic anhydride (751 mg, 3.66 mmol) in acetic acid (20 mL) was heated at reflux for 15 h. The solvent was removed in vacuo to yield an oil. Chromatography of the resulting oil yielded the product as a yellow solid (1.0 g, 59% yield): mp, 144C.; ?H NMR (CDC13) oel.47 (t, J=7.0 Hz, 3H, CH3), 2.26 (s, 3H, CH3), 2.88 (s,3H, CH3),3.75 (dd, J4.4, 14.3 Hz, 1H, CHH), 3.85 (s, 3H, CH3), 4.11 (q, J 7Hz, 2H, CH2), 5.87 (dd, J4.3, 10.5 Hz, 1H, NCH), 6.82-6.86 (m, 1H, Ar), 7.09-7.11 (m, 2H, Ar), 7.47 (d, J= 7 Hz, 1H., Ar), 7.64 (t, J= 8 Hz, 1H, Ar), 8.74 (d, J= 8 Hz, 1H, Ar), 9.49 (br s, 1H, NH); ?3C NMR (CDC13) oe14.61, 24.85, 41.54, 48.44, 54.34, 55.85, 64.43, 111.37, 112.34, 115.04, 118.11, 120.21, 124.85, 129.17, 130.96, 136.01, 137.52, 148.54, 149.65, 167.38, 169.09, 169.40; Anal Calc?d. for C22H24N075: C, 57.38; H, 5.25; N, 6.08. Found: C, 57.31; H, 5.34; N, 5.83.

6296-53-3 N-(1,3-Dioxo-1,3-dihydroisobenzofuran-4-yl)acetamide 226121, abenzofuran compound, is more and more widely used in various.

Reference£º
Patent; CELGENE CORPORATION; SCHAFER, Peter; KORISH, Shimon; (45 pag.)WO2015/175773; (2015); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

1914-60-9, 2,3-Dihydrobenzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A solution of 3a (0.30 g, 2.00 mmol) in THF and sat. aq NaHCO3 (1:1,12 mL) was stirred at r.t. and then TEMPO (59.1 mg, 0.38 mmol) and KBr (60.7 mg, 0.51 mmol) were added. A solution of aq NaOCl (2.5% w/v, 2 mL) was introduced in the reaction mixture. The mixture was stirred at r.t. for 3 h and then transferred to a separating funnel and treated with aq 1 N NaOH (25 mL). The aqueous layer was acidified with HCl (37% w/w) to pH 1 and extracted with CH2Cl2 (3 ¡Á 20 mL), dried (Na2SO4), filtered, and concentrated in vacuo. The crude acid was used in the next step. The crude acid was added to SOCl2 (2.90 mL, 40.00 mmol) at 60 C and kept for 6 h. The reaction mixture was then concentrated in vacuo. The mixture was diluted with Et2O (2 ¡Á 5 mL) and concentrated in vacuo again. The crude acid chloride was used in the next step. To a solution of the crude acid chloride in anhyd CH2Cl2 (5 mL) was added a solution of p-nitroaniline (1.10 g, 8.00 mmol) in anhyd CH2Cl2(10 mL) and the mixture was stirred at 50 C for 72 h. The crude mixture was concentrated in vacuo and purified by flash column chromatography (20% EtOAc in PE) to afford the desired product 1d; white solid; yield: 312.3 mg (55%); mp 109-112 C., 1914-60-9

1914-60-9 2,3-Dihydrobenzofuran-2-carboxylic acid 2776555, abenzofuran compound, is more and more widely used in various.

Reference£º
Article; Triandafillidi, Ierasia; Sideri, Ioanna K.; Tzaras, Dimitrios Ioannis; Spiliopoulou, Nikoleta; Kokotos, Christoforos G.; Synthesis; vol. 49; 18; (2017); p. 4254 – 4260;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

69604-00-8,69604-00-8, Ethyl 5-nitrobenzofuran-2-carboxylate is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example-2: preparation of ethyl-5-amino-l-benzofuran-2-carboxylate To a solution of ethyl-5-nitro- 1 -benzofuran-2-carboxylate (100g) in Ethyl acetate (800ml) was added 10% palladium on carbon (4.0g). The reaction mixture was stirred under an atmosphere of hydrogen at 33-38C with 4-5kg/cm2 hydrogen pressure for 4-6 hrs. After completion of the reaction, reaction mixture was filtered through hyflo, washed with ethyl acetate. The filtrate was concentrated in vacuo to give ethyl-5-amino-l-benzofuran-2- carboxylate yield: 100%

69604-00-8 Ethyl 5-nitrobenzofuran-2-carboxylate 1382954, abenzofuran compound, is more and more widely used in various.

Reference£º
Patent; ALEMBIC PHARMACEUTICALS LIMITED; JAYARAMAN, Venkat Raman; RATHOD, Dhiraj; VOHRA, Irfan; BHUJADE, Vinayak; MODI, Viral; GANDHI, Ojas; BUDH, Mayur; WO2013/153492; (2013); A2;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

81742-10-1, 3,6-Dichlorotrimellitic Anhydride is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

81742-10-1, General procedure: Place 5 mL concentrated H2SO4 in a 50 mL round bottom flask and cool in an ice/water bath. Compound 20 (300 mg, 0.5 mmol) is added in portions, and the reaction mixture is stirred at room temperature until TLC shows complete consumption of compound 20. The mixture is added to the stirring Et2O solution (400 mL) at 0 C. The resulting precipitate is filtered, washed with EtOAc, and dried. The crude product is purified by RP-HPLC using TEAA/ACN give compound 5a (96 mg, 20%) and compound 5b (101 mg, 21%).

The synthetic route of 81742-10-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Ying, Laiqiang; (22 pag.)US10513610; (2019); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.201809-69-0,6-Bromobenzofuran-3(2H)-one,as a common compound, the synthetic route is as follows.

[A] (rac)-6-Bromo-2,3-dihydro-benzofuran-3-ol To a solution of 6-bromo-benzofuran-3-one (10.5 g, 49.28 mmol) in methanol (100 ml) was added NaBH4 (2.37 g, 64.07 mmol) at 0 C. The reaction mixture was then stirred for 2 hours at room temperature. It was subsequently quenched with saturated ammonium chloride solution (50 ml) and extracted twice with ethyl acetate (2*50 ml). The combined organic phases were dried over Na2SO4 and evaporated under reduced pressure to give 9.75 g (92%) of the title compound as colorless liquid.

201809-69-0, As the paragraph descriping shows that 201809-69-0 is playing an increasingly important role.

Reference£º
Patent; Aebi, Johannes; Binggeli, Alfred; Hertel, Cornelia; Konkar, Anish Ashok; Kuehne, Holger; Kuhn, Bernd; Maerki, Hans P.; Wang, Haiyan; US2013/18055; (2013); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

10242-10-1, 5-Chlorobenzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Reference Synthesis Example 69 (0667) (5-Chloro-benzofuran-2-yl)methanol (0668) To a tetrahydrofuran solution (12 mL) of 5-chlorobenzofuran-2-carboxylic acid (620 mg, 3.15 mmol), borane-tetrahydrofuran complex (7.88 mL, 7.88 mmol, tetrahydrofuran solution) was added at 0 C. and the resultant solution was stirred at room temperature for 3 hours, at 60 C. for 1 day, and at room temperature for 1 day. After completion of the reaction, concentration under reduced pressure was carried out three times with adding methanol to the reaction solution and the concentrated solution was purified by silica gel column chromatography (hexane/ethyl acetate=3/1?1/1 (v/v)) to obtain the title compound (268 mg, yield 47%).

10242-10-1, The synthetic route of 10242-10-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; NISSAN CHEMICAL INDUSTRIES, LTD.; Saito, Noriko; Egi, Jun; Nagai, Hiroshi; Ueno, Megumi; Shintani, Yusuke; Inaba, Yusuke; Adachi, Michiaki; Hirai, Yuichi; Kawazu, Takeshi; Yasutake, Koichi; Takahashi, Daiki; (220 pag.)US9403798; (2016); B2;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

77095-51-3, Benzofuran-6-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

77095-51-3, Benzofuran-6-carboxylic acid (VI) (50 gms , 0.3086 moles) was suspended in 250 ml MDC and cooled to l5-20C. 5 ml DMF was added at l5-20C followed by thionyl Chloride ( 34 ml , 0.4629 moles). The temperature was raised to 35-40C and the reaction mixture was further stirred for 2 hours. The solvent was removed under vacuum at 45C. The residue was stirred in 250 ml MDC and the solution was cooled to 5-l0C. The solution of 5,7-dichloro-l,2,3,4-tetrahydroisoquinoline- 6-carboxylic acid HC1 (V) ( 74.12 gms , 0.2623 moles) and tri ethyl amine ( 215 ml , 1.5432 moles) in 500 ml MDC , was cooled to 5-l0C. To this solution was added benzofuran-6-carboxylic chloride (VII) maintaining temperature at 5-l0C. The temperature was raised to 25-30C and the reaction mixture was further stirred for 2 hours. The reaction mixture was quenched in 500 ml of water. The organic layer was separated, washed with water and stirred with 2.5 gms of charcoal for 30 minutes. The reaction mixture was filtered over hyflo and the clear filtrate evaporated under vacuum at 40-45C. The residue was stirred in 250 ml ethyl acetate and stirred for an hour at 25-30C. The solid was isolated by filtration and dried to yield titled compound. Yield: 95-98%

As the paragraph descriping shows that 77095-51-3 is playing an increasingly important role.

Reference£º
Patent; CIPLA LIMITED; PHULL, Manjinder Singh; RAO, Dharmaraj Ramachandra; MALHOTRA, Geena; THOPPIL, Sanoj Jose; PAWAR, Sunil Akaram; (28 pag.)WO2019/97547; (2019); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem