Category: benzofuran

7169-34-8, Benzofuran-3(2H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

7169-34-8, General procedure: In the following syntheses, coumaranone (1.00 mmol) and aldehyde (1.00 mmol) were combined in a microwave vial. 1 mL of the deep eutectic solvent formed from a 1:2 molar ratio of choline chloride and urea was added. The tube was then microwaved at 90 C for 30 minutes. At this point, the reaction was allowed to cool to room temperature and partitioned between water and methylene chloride. The organic layer was separated and concentrated to dryness in vacuo to afford the desired aurone. Further purification was performed as noted.

7169-34-8 Benzofuran-3(2H)-one 23556, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Taylor, Kimberly M.; Taylor, Zachary E.; Handy, Scott T.; Tetrahedron Letters; vol. 58; 3; (2017); p. 240 – 241;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.64169-34-2,5-Bromoisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

Step 2. Racemic tert-butyl (trans-2-((1-oxo-1,3-dihydroisobenzofuran-5-yl)oxy)cyclobutyl)carbamate (30-3a) To 5-bromoisobenzofuran-1(3H)-one (19-1a, 300 mg, 1.41 mmol), racemic trans-tert-butyl-3-hydroxycyclopentyl)carbamate (30-2a, 440 mg, 2.35 mmol), NiCl2(glyme) (15.5 mg, 0.070 mmol), dtbbpy (18.9 mg, 0.070 mmol), and Ir[(dF(CF3)ppy)2dtbbpy]PF6 (15.8 mg, 0.014 mmol) under an atmosphere of nitrogen was added MeCN (4.7 mL) and 2,2,6,6-tetramethylpiperidine (40-2, 286 mul, 1.69 mmol) and the resulting mixture was stirred vigorously for 16 hours under irradiation of blue LED light at room temperature. The reaction mixture was filtered through a short pad of Celite and concentrated to dryness. The crude material was purified by silica gel chromatography eluting with 0% to 100% EtOAc (with 1% Et3N modifier) in heptane to afford 30-3a (445 mg, 1.39 mmol, 99% yield) as a white solid. MS [M-tBu+H]+=320.3., 64169-34-2

The synthetic route of 64169-34-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Novartis AG; ADCOCK, Claire; BONAZZI, Simone; CERNIJENKO, Artiom; LAM, Philip; LINKENS, Kathryn Taylor; MALIK, Hasnain Ahmed; THOMSEN, Noel Marie-France; VISSER, Michael Scott; US2020/17461; (2020); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.24673-56-1,3-Methylbenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

A. N,3-dimethylbenzofuran-2-carboxamide[0218] A mixture of 3-methylbenzofuran-2-carboxylic acid (1.0 kg, 5.676mol) in methylene chloride (5.8L) and DMF (5mL) was chilled to ~ 2 0C. A solution of oxalyl chloride (864g, 6.81 mol) was added to the reaction mixture keeping the temperature below 10 0C, over a period of 2 hrs. A vigorous evolution of a gas was observed. The reaction mixture was stirred overnight under nitrogen at room temperature and then refluxed for 3 hrs. All of the solids were dissolved to give a brown color solution. HPLC analysis of an aliquot indicated that the reaction was complete. The mixture was concentrated on a rotary evaporator and the residual oxalyl chloride was chased with DCM (2L). The solid product was re-dissolved in DCM (6L) in a round bottom flask (1 OL) and chilled to ~ – 50C. A solution of methyl amine (40% in water, 1.7L, 3.5 eq, 19.86 mol) was carefully added to the acid chloride solution while keeping the temperature below 8 0C then stirred overnight at room temperature. Analysis of an aliquot indicated that the reaction was complete. Water (8.0L) was added to the reaction mixture, the layers were separated, the aqueous layer was back extracted with DCM (2×3 L), the combined organic layer was washed with water (4L) and dried over Na2SO4. The organic layer was filtered, the filtrate was concentrated and traces of DCM were co evaporated with heptanes (2L). The heptanes slurry was filtered and the cake was washed with heptanes (2x2L). All the brown color was removed in the heptane filtrate. The solid product was dried under high vacuum overnight to a constant weight. Yield of the title compound was 1.015 kg (94.5%. 1H NMR (CDCl3) : delta (ppm) 8.45 (s,lH), 7.61 (d, IH), 7.41 (m, 2 H), 7.30 (m, 1 H), 3.03 (d, 2 H), 2.63 (s, 3 H). HPLC: 99.0 area% (Rtau = 7.91 min)

24673-56-1, The synthetic route of 24673-56-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; AFFINIUM PHARMACEUTICALS, INC.; WO2008/98374; (2008); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.37418-88-5,4-Hydroxyisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

A mixture of 3-hydroxyphthalic anhydride(33.5mg, 0.2mmol), 3,5-bis(trifluoromethyl)benzyl amine(62mg, 0.2mmol) and chlorobenzene(5mL) was refluxed for 3 hours under argon atmosphere. After the reaction mixture was cooled to room temperature, the solvent was evaporated under reduced pressure and the obtained residue was crystallized n-hexane/ethyl acetate to give the title compound(68.5mg, 85.2percent) as a white crystal.1H-NMR(CDCl3): delta 4.90(2H, s), 7.19(1H, dd, J=8.4, 0.6Hz), 7.41(1H, dd, J=7.2, 0.6Hz), 7.61(1H, dd, J=8.4, 7.2Hz), 7.75(1H, brs), 7.82(1H, brs), 7.86(2H, s)., 37418-88-5

As the paragraph descriping shows that 37418-88-5 is playing an increasingly important role.

Reference£º
Patent; Institute of Medicinal Molecular Design, Inc.; EP1512396; (2005); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

64169-34-2, 5-Bromoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

2-Benzyl-4-bromo-benzoic acid (239):239 Ste p l3,5-Dibromo-3H-isobenzofuran-l-one (B3): The mixture of 5-bromo-3H-isobenzofuran-l- one (A3) (51.5g, 242 mmol) in bromobenzene (10OmL) is heated to 158C. Bromine (18.8mL, 363 mmol) is added dropwise to the mixture over 2h. The mixture is stirred for another 30 min. at 158C. The bromobenzene is removed by distillation under vacuum. The residue is vacuum dried 1 hour at 1200C to yield a black crystalline residue. Recrystallization: The residue is193 dissolved in hot isopropyl ether (30OmL). Activated charcoal (1 g) is added, stirred and filtered while hot. The filtrate is cooled in ice-water bath (00C) over night. The solid is filtered and is rinsed with cold isopropyl ether (2 x 1OmL) and vacuum dry over KOH (KOH) to yield 3,5-dibromo-3H-isobenzofuran-l-one (B3) (38g, 54%, mp: 1000C).

64169-34-2, 64169-34-2 5-Bromoisobenzofuran-1(3H)-one 603144, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; SANOFI-AVENTIS; WO2008/151211; (2008); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

1914-60-9, 2,3-Dihydrobenzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a mixture of 7 (1 eq) and 1,1?-carbodiimidazole (1.2 eq) in anhydrous THF was stirred for 1h then substituted aniline (0.9 eq) was added at room temperature. After stirring for 14 h, solvent was evaporated then the mixture acidified with 6N HCl to pH 2. The mixture was extracted with EtOAc (3 ¡Á 20 mL). The combined extracts were dried over anhydrous Na2SO4and the solvent was evaporated. After evaporation, the residue was purified by column chromatography (EtOAc/hexane = 1:3 – 1:50).

1914-60-9, The synthetic route of 1914-60-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Choi, Minho; Jo, Hyeju; Park, Hyun-Jung; Sateesh Kumar, Arepalli; Lee, Joonkwang; Yun, Jieun; Kim, Youngsoo; Han, Sang-Bae; Jung, Jae-Kyung; Cho, Jungsook; Lee, Kiho; Kwak, Jae-Hwan; Lee, Heesoon; Bioorganic and Medicinal Chemistry Letters; vol. 25; 12; (2015); p. 2545 – 2549;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.35700-40-4,2,3-Dihydrobenzofuran-7-carboxylic acid,as a common compound, the synthetic route is as follows.

Method B To an ice-cooled solution of 2,3-dihydrobenzo[b]furan-7-carboxylic acid (15a) (0.33 g, 2.0 mmol) in 3 ml of acetic acid there was added dropwise 0.6 ml of HNO3. The mixture was stirred in a warm oil bath (70C) for 24 hours, and then poured into water. After cooling, the product was collected on a filter to give 0.21 g of solid (50.2%). This was recrystallized from ethyl acetate to afford 0.14 g (33.5%) of 15k , mp 249-251.5C., 35700-40-4

35700-40-4 2,3-Dihydrobenzofuran-7-carboxylic acid 2795014, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Erbamont Inc.; EP234872; (1991); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

7169-34-8,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7169-34-8,Benzofuran-3(2H)-one,as a common compound, the synthetic route is as follows.

General procedure: To a solution of benzofuran-3(2H)-one (134mg, 1mmol) in dry methanol (20mL) at room temperature was added the appropriate aldehyde (1.2mmol) and Al2O3 (1mmol). The mixture was refluxed, under N2, for 48h. After, the solvent was removed and the solid residue was dissolved in CH2Cl2. The organic layer was washed with water, dried with anhydrous Na2SO4 and concentrated under reduced pressure to give the crude product.

7169-34-8 Benzofuran-3(2H)-one 23556, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Carrasco, Marta P.; Newton, Ana S.; Goncalves, Lidia; Gois, Ana; Machado, Marta; Gut, Jiri; Nogueira, Fatima; Haenscheid, Thomas; Guedes, Rita C.; Dos Santos, Daniel J.V.A.; Rosenthal, Philip J.; Moreira, Rui; European Journal of Medicinal Chemistry; vol. 80; (2014); p. 523 – 534;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.942-06-3,4,5-Dichlorophthalic Anhydride,as a common compound, the synthetic route is as follows.

4,5-Dichlorophthalic anhydride (430 mg, 2.0 mmol) and 4-aminobutyric acid (206 mg, 2.0 mmol) were added to glacial acetic acid (10 mL) and heated to 100 C for 3 h. The reaction was quenched with water (10 mL) and the NaOH solution (0.1 mol/L) was adjusted to pH 6-8. Dichloromethane extraction (10mL ¡Á 3), washed with saturated NaHCO3 solution, washed with water, combined with organic phase, dried over anhydrous sodium sulfateDry and dry, 576mg of yellow solid.LC-MS and 1H-NMR confirmed the expected intermediate compound in a yield of 96.0%., 942-06-3

The synthetic route of 942-06-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Chinese Academy Of Medical Sciences Pharmaceutical Institute; Chinese Academy Of Sciences Animal Institute; Wu Song; Zhou Qi; Zhang Wenxuan; Wu Jun; Wu Hongna; Hao Jie; Wang Liu; (88 pag.)CN109867661; (2019); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

69604-00-8,69604-00-8, Ethyl 5-nitrobenzofuran-2-carboxylate is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Commercially available ethyl 5-NITROBENZOFURAN-2-CARBOXYLATE 30 was HYDROGENATED on PD-C and ACYLATED using commercially available 4-NITRO-N-METHYL-2- TRICHLOROACETYL-PYRROLE 32 to form 33. HYDROGENATION of 33 followed by acylation with 32 afforded the nitro compound 35, which upon HYDROGENATION yielded 36 as the amino compound. ACETYLATION of the amino group of 36 followed by base catalyzed hydrolysis resulted in the acid 37. Coupling of 37 with the hydrochloride salt 39 (obtained by DEPROTECTION of the BOC derivative 38) using EDC afforded the ester 40. See Figure 4.

69604-00-8 Ethyl 5-nitrobenzofuran-2-carboxylate 1382954, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; THE GOVERNMENT OF THE UNITED STATES OF AMERICA, AS REPRESENTED BY THE SECRETARY, DEPARTMENT OF HEALTH AND HUMAN SERVICES; WO2005/32594; (2005); A2;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem