Tag: M.W:100-200

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.84594-78-5,6-Nitro-2,3-dihydrobenzofuran-5-amine,as a common compound, the synthetic route is as follows.

84594-78-5, Preparation of 6-nitro-2,3-dihydrobenzofuran Into a 2000 mL 3-necked round-bottom flask, was placed a solution of 6-nitro-2,3-dihydrobenzofuran-5-amine (57 g, 300.83 mmol, 1.00 equiv, 95%) in H20 (1000 mL). To the mixture was added con H2SO4 (570 mL). To the above was added NaNO2 (24 g, 347.83 mmol, 1.10 equiv) in several batches, while cooling to a temperature of 0 C. To the above was added phosphenous acid (114 mL, 50%) dropwise with stirring, while cooling to a temperature of 0 C. The resulting solution was allowed to react, with stirring, for 1 h while the temperature was maintained at 45 C. in a bath of oil. The reaction progress was monitored by TLC (EtOAc/PE=1:2). The resulting solution was extracted two times with 200 mL of EtOAc and the organic layers combined. The resulting mixture was washed 2 times with 150 mL of water. The mixture was dried over Na2SO4 and concentrated by evaporation under vacuum using a rotary evaporator. The residue was purified by eluding through a column with a 1:50 EtOAc/PE solvent system. This resulted in 42 g (76%) of 6-nitro-2,3-dihydrobenzofuran as a red yellow solid.

As the paragraph descriping shows that 84594-78-5 is playing an increasingly important role.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; US2008/200471; (2008); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

1914-60-9, 2,3-Dihydrobenzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a mixture of 7 (1 eq) and 1,1?-carbodiimidazole (1.2 eq) in anhydrous THF was stirred for 1h then substituted aniline (0.9 eq) was added at room temperature. After stirring for 14 h, solvent was evaporated then the mixture acidified with 6N HCl to pH 2. The mixture was extracted with EtOAc (3 ¡Á 20 mL). The combined extracts were dried over anhydrous Na2SO4and the solvent was evaporated. After evaporation, the residue was purified by column chromatography (EtOAc/hexane = 1:3 – 1:50).

1914-60-9, 1914-60-9 2,3-Dihydrobenzofuran-2-carboxylic acid 2776555, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Choi, Minho; Jo, Hyeju; Park, Hyun-Jung; Sateesh Kumar, Arepalli; Lee, Joonkwang; Yun, Jieun; Kim, Youngsoo; Han, Sang-Bae; Jung, Jae-Kyung; Cho, Jungsook; Lee, Kiho; Kwak, Jae-Hwan; Lee, Heesoon; Bioorganic and Medicinal Chemistry Letters; vol. 25; 12; (2015); p. 2545 – 2549;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.77095-51-3,Benzofuran-6-carboxylic acid,as a common compound, the synthetic route is as follows.,77095-51-3

[00142] The benzofuran carboxylic acid 18? was treated with oxalyl chloride (1.2 equivalents) and a catalytic amount of DMF, stirring for 5.5 hours until a clear solution was obtained. The solvent was removed under reduced pressure and the acid chloride of compound 18? was stored under argon until use, on the next day. The acid chloride, in methylene chloridewas added slowly to a methylene chloride solution of the compound of Formula 12 and diisopropylethylamine (DIPEA) which was cooled to 0-5 C. The reaction was not permitted to rise above 5C, and after completion of addition, was stirred at 5C for a further 0.5 hour. Upon aqueous workup and extraction with methylene chloride, the product, compound 19, was isolated in quantitative yield.

The synthetic route of 77095-51-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; SARCODE BIOSCIENCE INC.; ZELLER, James, Robert; VENKATRAMAN, Sripathy; BROT, Elisabeth, C.A.; IYER, Subashree; HALL, Michael; WO2014/18748; (2014); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.569-31-3,6,7-Dimethoxy-3H-1-isobenzofuranone,as a common compound, the synthetic route is as follows.,569-31-3

Example V — SYNTHESIS OF 3-[N(BENZODIOXAN-1,4 YL-6) AMINO] 6,7-DIMETHOXY 3H-ISOBENZOFURANONE A mixture of 30 g of 6,7-dimethoxy 3H-isobenzofuranone, prepared according to the method described in Example IV, 1 liter of ethanol and 300-400 cm3 of dimethylamine was agitated for several hours and then evaporated under vacuum at 30 – 35 C. The crystallized product was washed with heptane. The 2,3-dimethoxy N,N-dimethyl 6-hydroxymethyl benzamide was obtained in a yield of 100%. F = 90 C.

The synthetic route of 569-31-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Societe Cortial; US4122202; (1978); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

209256-42-8, 2,3-Dihydrobenzofuran-4-carbaldehyde is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a stirring solution of the aldehyde from step A Example 33 (400 mg, 2.7 mmol) in dichloromethane (40 mL) was added carbethoxymethylene-triphenylphosphorane (1.41 g, 4.05 mmol). The reaction was refluxed for 16 hrs. and the solvent was removed in vacuo. The title compound (white solid, 533 mg, 91% yield) was isolated from a silica gel column using 20% ethyl acetate in hexanes as the eluent., 209256-42-8

209256-42-8 2,3-Dihydrobenzofuran-4-carbaldehyde 18787449, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Bristol-Myers Squibb Company; US6887870; (2005); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.58546-89-7,Benzofuran-5-amine,as a common compound, the synthetic route is as follows.

Example 58 (2521) 3-(Benzofuran-5-ylamino)-7-chloro-5-hydroxy-2H-benzoreiri ,2,41thiadiazine 1 ,1 – dioxide (2522) To a suspension of of 3-bromo-7-chloro-5-hydroxy-4H-benzo[e][1 ,2,4]thiadiazine 1 ,1 – dioxide (lnt-3, 200 mg) and benzofuran-5-amine (103 mg) in t-BuOH (10 mL) stirred under nitrogen was added KH2P04 (105 mg) in one portion. The reaction mixture was stirred at 80 C for 24 hr. The reaction mixture was allowed to cool to RT, then was concentrated under reduced pressure, diluted with deionized water (15 mL) and allowed to stir for 15 min. The resulting precipitate was collected by filtration and washed with water (2 x 5 mL) and diethyl ether (3 x 5 mL), and dried to afford the titled compound (160 mg). LCMS m/z 364.00 (M+H). 1H NMR after D20 exchange(400 MHz, DMSO-c/6) delta ppm 7.02 (d, J=1 .53 Hz, 1 H) 7.10 (d, J=2.19 Hz, 1 H) 7.19 (d, J=1 .97 Hz, 1 H) 7.33 (dd, J=8.77, 2.19 Hz, 1 H) 7.63 (d, J=8.77 Hz, 1 H) 7.87 (d, J=2.19 Hz, 1 H) 8.00 (d, J=2.19 Hz, 1 H)., 58546-89-7

58546-89-7 Benzofuran-5-amine 1477152, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; GLAXOSMITHKLINE INTELLECTUAL PROPERTY DEVELOPMENT LIMITED; ADAMS, Jerry Leroy; ATOR, Laura E.; DUFFY, Kevin J.; GRAYBILL, Todd L.; KIESOW, Terence John; LIAN, Yiqian; MOORE, Michael Lee; RALPH, Jeffrey M.; RIDGERS, Lance Howard; (370 pag.)WO2017/98421; (2017); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1207453-90-4,6-Fluoro-4-nitroisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

To a solution of 6-fluoro-4-nitroisobenzofuran-1(3H)-one (1) (10 g, 50.8 mmol), 2-methyl-2H-1,2,4-triazole-3-carbaldehyde (2) (11 g, 101.5 mmol) and Et3N (20 mL, 152.4 mmol) in anhydrous THF (150 mL) was added acetic anhydride (35 mL) drop-wise with stirring at room temperature in 3 minutes. The mixture was then stirred at reflux for 45 minutes when a green solid was precipitated from solvent. The solvent was concentrated to 15 mL and the resulting mixture was cooled to 0 C. and filtered, washed with 15 mL of ethyl acetate to obtain (Z)-6-fluoro-3((1-methyl-1H-1,2,4-triazol-5-yl)methylene)-4-nitroisobenzofuran-1(3H)-one (3) as a green solid (11.5 g, yield: 78%). LC-MS (ESI) m/z: 291 (M+1)+. 1H-NMR (400 MHz, DMSO-d6) delta (ppm): 3.94 (s, 3H), 7.15 (s, 1H), 8.10 (s, 1H), 8.40-8.42 (dd, J1=6.4 Hz, J2=2.4 Hz, 1H), 8.58-8.61 (dd, J1=8.8 Hz, J2=2.4 Hz, 1H).

1207453-90-4, The synthetic route of 1207453-90-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BioMarin Pharmaceutical, Inc.; Wang, Bing; Chu, Daniel; US2013/53365; (2013); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.23681-89-2,2,3-Dihydrobenzofuran-6-ol,as a common compound, the synthetic route is as follows.

General procedure: NaH (12.0mmol) was added to a solution of 1 or 722 (1.88g, 10.0mmol) and substituted phenol (12.0mmol) in DMF (50mL) at room temperature under N2, and the mixture was stirred at 80¡ãC for 10h. Water was added to the cooled mixture, and the mixture was extracted with EtOAc several times. The combined organic layers were washed with water, dried over anhydrous Na2SO4, and concentrated under reduced pressure. The crude residue was purified by silica gel column chromatography to obtain purified compound 2, or crude 2 was used directly for the next reaction without further purification., 23681-89-2

23681-89-2 2,3-Dihydrobenzofuran-6-ol 12236540, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Shinozuka, Tsuyoshi; Tsukada, Tomoharu; Fujii, Kunihiko; Tokumaru, Eri; Shimada, Kousei; Onishi, Yoshiyuki; Matsui, Yumi; Wakimoto, Satoko; Kuroha, Masanori; Ogata, Tsuneaki; Araki, Kazushi; Ohsumi, Jun; Sawamura, Ryoko; Watanabe, Nobuaki; Yamamoto, Hideki; Fujimoto, Kazunori; Tani, Yoshiro; Mori, Makoto; Tanaka, Jun; Bioorganic and Medicinal Chemistry; vol. 26; 18; (2018); p. 5099 – 5117;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.16859-59-9,3-Hydroxyisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

General procedure: 2-Formylbenzoic acid (1a; 1.0 equiv) was heated at reflux in SOCl2 (5?10 equiv) for 4 h at 100 ¡ãC. The remaining SOCl2 was removed in vacu-um and the obtained solid was dissolved in CH2Cl2 (10 mL). The mix-ture was cooled to 0 ¡ãC and the desired primary amine (2.0 equiv)was slowly added. The solution was stirred for 24 h at r.t. then thereaction mixture was diluted with EtOAc (70 mL), washed with citricacid (0.5 M), sat. aq Na2CO3 solution, and brine. The organic layer wasdried over MgSO4 and the solvent was removed under reduced pres-sure. The obtained products were used without further purification., 16859-59-9

The synthetic route of 16859-59-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Niedek, Dominik; Schuler, Soeren M.M.; Eschmann, Christian; Wende, Raffael C.; Seitz, Alexander; Keul, Felix; Schreiner, Peter R.; Synthesis; vol. 49; 2; (2017); p. 371 – 382;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

652-40-4, 4,7-Difluoroisobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

652-40-4, (3) Methyl 3-(4,7-difluoro-1,3-dioxo-1,3-dihydro-isoindol-2-yl)-2-(2-methyl-[1,3]dioxolan-2-yl)propionate Methyl 3-(4,7-difluoro-1,3-dioxo-1,3-dihydro-isoindol-2-yl)-2-(2-methyl-[1,3]dioxolan-2-yl)propionate was prepared (0.27 g, 31percent) in the same manner as described in the above example 5. (1) from methyl 3-amino-2-(2-methyl-[1,3]dioxolan-2-yl)propionate (0.47 g, 2.47 mmol) and 3,6-difluorophthalic anhydride (0.50 g, 2.72 mmol), and the obtained product was identified with the following NMR data. 1H NMR (CDCl3, 300 MHz) delta 7.31 (t, 2H, ph, J=5.3 Hz), 3.95 (m, 6H, acetal H, -CHCH2NPht), 3.64 (s, 3H -CO2CH3), 3.20 (m, 1H, -CHCH2NPht), 1.42 (s, 3H, CH3) 3C NMR (CDCl3, 300 MHz) delta 171.9, 163.9, 155.8, 152.2, 125.5, 121.1, 120.6, 120.1, 108.9, 65.4, 60.9, 53.8, 51.7, 37.2, 22.0, 14.5

As the paragraph descriping shows that 652-40-4 is playing an increasingly important role.

Reference£º
Patent; Korea Institute of Science and Technology; US2003/139464; (2003); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem