Category: benzofuran

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.652-39-1,4-Fluoroisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

General procedure: To substituted phthalic anhydride (1.0 eq.) in 0.5 mL of DMSOwas added 4-aminoquinoline based diamines (1.0 eq.) in a microwavereaction vial. The vessel was sealed with a PTFE cap andheated to 160 ¡ãC for 2 min in a microwave reactor. After completionof the reaction as evident from TLC, the vessel contents werepoured in water (20 mL) and extracted with ethyl acetate(2 30 mL). The organic layers were combined, dried over anhydrous Na2SO4 and concentrated under reduced pressure toyield the crude product which was re-crystallized using absoluteethanol.

The synthetic route of 652-39-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Rani, Anu; Singh, Amandeep; Gut, Jiri; Rosenthal, Philip J.; Kumar, Vipan; European Journal of Medicinal Chemistry; vol. 143; (2018); p. 150 – 156;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

641-70-3, 3-Nitrophthalic anhydride is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A round bottom flask was charged with a solution of glacial acetic acid (75 ml) and alpha-amino glutarimide hydrochloride (8.5 g). Sodium acetate anhydrous (4.5 g) was added lot-wise to the solution at 25 C. to 30 C. followed by addition of 3-nitro phthalic anhydride (log) at the same temperature. The reaction mixture was stirred at 118 C. for 18 hr. After the completion of reaction, the reaction mass was cooled to 60 C. and the solvent was distilled off under vacuum to get the residue. To the residue obtained, water (100 ml) was added; the mixture was stirred for 1 hr at 25 C. to 30 C. and the mass filtered. The wet cake obtained was slurried with water (100 ml*2), filtered and dried in an air tray dryer until the water content was less than 0.5% to afford 2-(2,6-dioxopiperidin-3-yl)-4-nitroisoindoline-1,3-dione (14 g). Yield: 89.7%, Purity: 98%.

As the paragraph descriping shows that 641-70-3 is playing an increasingly important role.

Reference£º
Patent; Apicore US LLC; Kovi, Ravishanker; Bobbili, Veerabhadra Rao; Kannapan, Jayaraman; (13 pag.)US2017/260157; (2017); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

496-41-3, Benzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: In a 20 or 40 mL reaction vial equipped with magnetic stir bar and Teflon-lined cap, a solution of the corresponding carboxylic acid (1.5 mmol, 3.0 eq) and DMAP (183.3 mg, 1.5 mmol, 3.0 eq) in anhydrous DMF (9.0 mL) was homogenized by stirring for 5-10min. EDCI¡¤HCl (287.6mg, 1.5mmol, 3.0 eq) was added, and the resulting mixture was homogenized by stirring for 5-10 min. The corresponding 1,3-indandione (0.5mmol, 1.0 eq) was added, and the resulting mixture was resealed and stirred for 12-72h, monitoring by LCMS. When complete, workup method A, B, or C was used to isolate the final products.

496-41-3 Benzofuran-2-carboxylic acid 10331, abenzofuran compound, is more and more widely used in various.

Reference£º
Article; Larsen, Brian J.; Rosano, Robert J.; Ford-Hutchinson, Thomas A.; Reitz, Allen B.; Wrobel, Jay E.; Tetrahedron; vol. 74; 22; (2018); p. 2762 – 2768;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

496-41-3, Benzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Oxalyl chloride (3.13 mL, 3.70 mmol) was added to a suspension of benzofuran-2- carboxylic acid (5.00 g, 3.08 mmol) in DCM (100 mL, anhydrous) and DMF (0.1 mL, 1.3 mmol) at r.t.. The mixture was stirred at r.t. for 1 h to give a colourless solution which was cooled to 0 C. N,O-Dimethylhydroxylamine hydrochloride (3.31 g, 3.39 mmol) and pyridine (7.5 mL, 9.27 mmol) were added sequentially and the mixture was stirred at r.t. for 18 h, then partitioned between EtOAc and sat. aq. NaHC03. Column chromatography (3 : 1 hexanes:EtOAc) gave 121 (6.32 g, 100%). 1H MR (CDC13) delta 7.69 (ddd, 7.9, 1.2, 0.7 Hz, 1H), 7.61 (ddd, J = 8.4, 1.7, 0.9 Hz, 1H), 7.51 (d, J = 1.0 Hz, 1H), 7.48 (ddd, J = 7.9, 7.2, 1.3 Hz, 1H), 7.30 (ddd, J = 7.5, 7.3, 0.9 Hz, 1H), 3.84 (s, 3H), 3.43 (s, 3H). Found: [M+H]=206.2. l-(Benzofuran-2-yl)-3-(dimethylamino ropan-l-one (122)

As the paragraph descriping shows that 496-41-3 is playing an increasingly important role.

Reference£º
Patent; THE GLOBAL ALLIANCE FOR TB DRUG DEVELOPMENT, INC.; UPTON, Anna, Marie; COOPER, Christopher, Blair; MARCEL, Koenraad, Jozel Lodewijk; GUILLEMONT, Jerome, Emile Goerges; VAN DEN BROECK, Walter Marcel, Mathilde; PALMER, Brian, Desmond; MA, Zhenkun; (186 pag.)WO2017/155909; (2017); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.652-39-1,4-Fluoroisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

To methanol (175 mL) was added sodium hydride (3.36g, 60percent dispersion, 84.0 mmol) portionwise at ambient temperature under nitrogen. To the solution was added a solution of 3-fluorophthalic anhydride (5.56g, 33.5 mmol) in methanol (50 mL) dropwise under nitrogen at room temperature. The reaction was then worked-up as described for Example 56A to afford the title compound. The NMR data showed the product to be contaminated with 20percent of the 6-fluoro isomer. The material was used without further purification in the next step. 1H NMR (300 MHz, DMSO-J6) delta ppm 3.79 – 3.84 (two s, 3 H) 7.53 – 7.69 (m, 2 H) 7.76 (ddd, /=15.60, 7.29, 1.53 Hz, 1 H) 13.56 (s, 1 H); MS (+DCIZNH3) m/z 216.0 [M+NH4]+.

652-39-1 4-Fluoroisobenzofuran-1,3-dione 69551, abenzofuran compound, is more and more widely used in various.

Reference£º
Patent; ABBOTT LABORATORIES; AKRITOPOULOU-ZANZE, Irini; BRAJE, Wilfried; DJURIC, Stevan, W.; WILSON, Noel, S.; TURNER, Sean, C.; KRUGER, Albert, W.; RELO, Ana-Lucia; SHEKHAR, Shashank; WELCH, Dennie, S.; ZHAO, Hongyu; GANDARILLA, Jorge; GASIECKI, Alan, F.; LI, Huanqiu; THOMPSON, Christina, M.; ZHANG, Min; WO2010/135560; (2010); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.271-89-6,Benzofuran,as a common compound, the synthetic route is as follows.

General procedure: n-Butyllithium (1.67 M solution in hexane, 2.9 mL, 4.8 mmol) was added dropwise into a solution of 1,3-dimethoxybenzene (0.55 g, 4.0 mmol) in THF (5 mL) at 0 C and the mixture was stirred for 2 h at the same temperature. Then, DMF (0.34 mL, 4.4 mmol) was added to the mixture and the obtained mixture was stirred at 0 C. After 2 h at the same temperature, aq NH3 (8 mL, 120 mmol) and I2 (1.12 g, 4.4 mmol) were added and stirred for 2 h at rt. The reaction mixture was quenched with satd aq Na2SO3 (15 mL) and was extracted with Et2O (3¡Á20 mL). The organic layer was washed with brine and dried over Na2SO4 to provide 2,6-dimethoxybenzonitrile in over 80% purity. The product was purified by a short column chromatography on silica gel (Hexane/EtOAc=3:1) to give pure 2,6-dimethoxybenzonitrile in 91% yield as a colorless solid.

271-89-6 Benzofuran 9223, abenzofuran compound, is more and more widely used in various.

Reference£º
Article; Ushijima, Sousuke; Moriyama, Katsuhiko; Togo, Hideo; Tetrahedron; vol. 67; 5; (2011); p. 958 – 964;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.125-20-2,Thymolphthalein,as a common compound, the synthetic route is as follows.

preparation steps are: thymolphtaleine (5) (4.3 g, 10 mmol), TBAHS (3.4 g, 10 mmol), acetobromo-alpha-D-glucuronic acid methyl ester (4) (4.0 g, 10 mmol) dissolved in 30 ml of dichloromethane and cooled to 10 C, 30 ml of 1N potassium carbonate aqueous solution was added and then stirred at room temperature for 3 hours, and the mixture was separated and dried over anhydrous sodium sulfate. The organic phase was concentrated to dryness to give thymolphtaleine-alpha-acetyl-D-glucuronic acid methyl ester (6) (yield: 3.4 g, yield 46.7%).

125-20-2 Thymolphthalein 31316, abenzofuran compound, is more and more widely used in various.

Reference£º
Patent; Guangdong Younide Biological Technology Co., Ltd.; Sai Chi Bio-technology (Shanghai) Co., Ltd.; Su Hongwen; Lai Hua; Liang Weiye; Liu Zhiwen; (7 pag.)CN108129530; (2018); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

641-70-3, 3-Nitrophthalic anhydride is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Et3N (23.27 g, 0.23 mol) was added dropwise into the solution of 3-nitro-phthalic anhydride (7, 44.0 g, 0.23 mol) and 3-aminopiperidine-2,6-dione hydrochloride (8, 37.9 g, 0.23 mol) in THF (600 ml). After reacting for 30 min below 20 C, the precipitation was filtered, washed with THF (30 mL¡Á3), and then dried in vacuo to give intermediate 11 (67.20 g, 91.0%) as a white solid (HPLC, 95.24%).

The synthetic route of 641-70-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Huang, Daowei; Shen, Chengwu; Wang, Wenya; Huang, Lei; Ni, Feng; Li, Jianqi; Synthetic Communications; vol. 46; 16; (2016); p. 1343 – 1348;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.271-89-6,Benzofuran,as a common compound, the synthetic route is as follows.

1. To a solution of benzofuran (1.5 g, 12.69 mmol) in 60 mL of THF, was added 5.08 mL(12.69 mmol) of n-BuLi solution in hexanes (2.5 M) at -78 C. After 1 hr at -78 C, the reaction mixture was added DMF (3.43 mL). After overnight at RT, the reaction was quenched with saturated ammonium chloride, and extracted with EtOAc (x3). The combined organic extracts were dried (MgS04), filtered, and concentrated. Flash chromatography (10 %EtOAc/Hexanes) gave benzofuran-2-carbaldehyde (1.48 g, 80%). *H NMR (400 MHz, CDC13) delta ppm: 9.88 (s, IH), 7.76 (d, J=8.4 Hz, IH), 7.62 (d, J=8.4 Hz, IH), 7.57 (s, IH), 7.52 (td, J=7.2, 1.2 Hz IH), 7.35 (td, J=7.2, 1.2 Hz, IH).

The synthetic route of 271-89-6 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; SRI INTERNATIONAL; JONG, Ling; CHANG, Chih-Tsung; PARK, Jaehyeon; (71 pag.)WO2016/114816; (2016); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

496-41-3, Benzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a mixture of benzofuran-2-carboxylic acid (8) (1 eq) and 1,1?-carbodiimidazole (1.2 eq) in anhydrous THF was stirred for 1h then substituted aniline (0.9 eq) was added at room temperature. After stirring for 14 h, solvent was evaporated then the mixture acidified with 6N HCl to pH 2. The mixture was extracted with EtOAc (3 ¡Á 20 mL). The combined extracts were dried over anhydrous MgSO4 and the solvent was evaporated. After evaporation, the residue was purified by column chromatography (EtOAc/hexane = 1:2 – 1:50).

As the paragraph descriping shows that 496-41-3 is playing an increasingly important role.

Reference£º
Article; Choi, Minho; Jo, Hyeju; Park, Hyun-Jung; Sateesh Kumar, Arepalli; Lee, Joonkwang; Yun, Jieun; Kim, Youngsoo; Han, Sang-Bae; Jung, Jae-Kyung; Cho, Jungsook; Lee, Kiho; Kwak, Jae-Hwan; Lee, Heesoon; Bioorganic and Medicinal Chemistry Letters; vol. 25; 12; (2015); p. 2545 – 2549;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem