Category: benzofuran

69999-16-2, 2,3-Dihydrobenzofuranyl-5-acetic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(S)-4-Bromo-3-hydrazono-2-oxo-2,3-dihydro- lH-indole-6-carboxylic acid [3-(2- hydroxymethyl-pyrrolidin-l-yl)-propyl]-amide (0.22 g, 0.52 mmol) was added to a solution of (2,3-dihydro-benzofuran-5-yl)-acetic acid (0.93 g, 0.52 mmol), triethylamine (0.01 mL, 0.78 mmol) and HBTU (0.20 g, 0.52 mmol) in DMF (4 mL) and stirred at room temperature overnight. The reaction mixture was concentrated in vacuo and purified by column chromatography (20% methanol in dichloromethane) followed by HPLC (10-100% acetonitrile/water) to give 0.040 g (13%) of (S)-4- bromo-3 – [(2-2,3 -dihy dro-benzof uran-5 -yl-acetyl)-hydrazono] -2-oxo-2,3 -dihydro- 1 H- indole-6-carboxylic acid [3-(2-hydroxymethyl-pyrrolidin-l-yl)-propyl]-amide. 1H NMR (400 MHz, CD3OD) 5 7.75 (s, IH), 7.37 (s, IH), 7.24 (s, IH), 7.11 (d, J = 7.8 Hz, IH), 6.65 (d, / = 8.2 Hz, IH), 4.50 (t, J = 12.7 Hz, 2H), 4.10 (bs, 2H), 3.88 (dd, J = 3.9 Hz, 7= 12.2 Hz, IH), 3.74-3.40 (m, 6H), 3.22-3.04 (m, 4H), 2.26-1.81 (m, 6H). Mass spectrum (LCMS, ESI pos.): Calcd for C27H30BrN5O5: 584.46; found 584.1(M+H). EPO

69999-16-2, The synthetic route of 69999-16-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; JANSSEN PHARMACEUTICA N.V.; WO2006/101937; (2006); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.209256-42-8,2,3-Dihydrobenzofuran-4-carbaldehyde,as a common compound, the synthetic route is as follows.

D. trans-3-(2,3-Dihydro-4-benzofuranyl)-2-pronenoic acid A solution of 2,3-dihydrobenzofuran-4-carboxaldehyde (8.42 g, 56.9 mmol) and malonic acid (11.86 g, 114 mmol) in pyridine (30 mL) and pyrrolidine (1 mL) was heated at reflux for 6 hr. The solution was cooled and poured into cold water (400 mL). The mixture was made strongly acidic with 12 N HCl to give a pale yellow precipitate that was filtered and air dried. The pale yellow powder was recrystallized from isopropanol to give white flakes (10.3 g, 95.3%, mp: 205-207C). Anal. for C11H10O3: Calc’d, C, 69.46; H, 5.30. Found, C, 69.36; H, 5.17. 1H NMR (300 MHz, CDCl3) delta7.76 (d, 1H, J=16.1 Hz), 7.15 (t, 1H, J=7. 8 Hz), 7.07 (d, 1H, J=7.8 Hz), 6.81 (d, 1H, J=7.8 Hz), 6.37 (d, 1H, J=16.1 Hz), 4.62 (t, 2H, J=8.8 Hz), 3.33 (t, 2H, J=8.8 Hz)., 209256-42-8

209256-42-8 2,3-Dihydrobenzofuran-4-carbaldehyde 18787449, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; EP1041980; (2005); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

37418-88-5, 4-Hydroxyisobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 100 Preparation of 2-[4-[2-(6,7-bis(methoxymethyl)benzoxazol-2-ylthio]ethyl]piperazin-1-yl]-N-(2,6-di isopropylphenyl)acetamide: N,N-Diisopropylethylamine (4.39 g, 34.0 mmol) was added to a solution of 3-hydroxyphthalic anhydride (5.0 g, 30.5 mmol) in dichloroethane (60 ml), then chloromethyl methyl ether (2.57 g, 32.0 mmol) was dropped thereinto under cooling with ice water and the mixture was returned to room temperature and stirred for 1 hour. Then N,N-diisopropylethylamine (2.20 g, 17.0 mmol) and chloromethyl methyl ether (1.28 g, 16.0 mmol) were further added thereto followed by stirring for 1 hour. After the reaction, the solvent was evaporated and the residue was diluted with water followed by extracting with ether. The organic layer was washed with water and a saturated sodium chloride solution successively and dried over anhydrous magnesium sulfate and the solvent was evaporated therefrom to provide 6.3 g (yield 99%) of 3-methoxymethyloxyphthalic anhydride as colorless oil., 37418-88-5

As the paragraph descriping shows that 37418-88-5 is playing an increasingly important role.

Reference£º
Patent; Kowa Company, Ltd.; US2004/38987; (2004); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

19477-73-7, 6-Bromoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

6-Bromophthalide was prepared by portion wise addition of phthalide (1 g, 7.45 mmol) to a mixture of trifluoroacetic acid (TFA) (3.7 mL) and sulfuric acid (1.7 mL) at room temperature for 9 h. The reaction mixturewas stirred at room temperature for 60 h, then poured onto ice and extracted with ethyl acetate. The combined organic phases were subsequently washed with a saturated solution of sodium bicarbonate and brine. After evaporation of the solvents in vacuum, the crude product was purified by column chromatography on silica gel (n-hexane/EtOAc: 9/1) to yield the desired product, 19477-73-7

19477-73-7 6-Bromoisobenzofuran-1(3H)-one 262235, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Mirabdolbaghi, Roya; Dudding, Travis; Tetrahedron; vol. 69; 15; (2013); p. 3287 – 3292;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

652-39-1, 4-Fluoroisobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

652-39-1, A mixture of 3 -fluorophthalic anhydride (1 equiv.), 9-amino-S -(4-methoxybenzyl)-2-oxa- 6-thia-5-azaspiro[3.5]nonane 6,6-dioxide (1 equiv.), and potassium acetate (2.5 equiv.) in acetic acid is stirred at 120 ¡ãC overnight. The dark mixture is cooled and filtered. The filter cake is dissolved in DCM and washed with saturated NaHCO3 and brine. The organic layer is dried (Na2 SO4) and concentrated to provide 4-fluoro-2? -oxetano-6? -sulfonyl-thalidomide.

As the paragraph descriping shows that 652-39-1 is playing an increasingly important role.

Reference£º
Patent; C4 THERAPEUTICS, INC.; PHILLIPS, Andrew, J.; NASVESCHUK, Chris, G.; HENDERSON, James, A.; LIANG, Yanke; FITZGERALD, Mark, E.; MICHAEL, Ryan, E.; (790 pag.)WO2017/197056; (2017); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.10242-10-1,5-Chlorobenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

To a solution of N-(l-aminopiperidin-4-yl)-2-(4-chloro-3-fluorophenoxy) acetamide (0.100 g, 0.33 mmol, 1.0 equiv) in DMF (5 mL) was added 5-chlorobenzofuran-2-carboxylic acid (0.065 g, 0.33 mmol, 1.0 equiv) and HATU (0.250 g, 0.66 mmol, 2.0 equiv) at RT. The resulting reaction mixture was stirred for 10 minutes DIPEA (0.28 mL, 0.99 mmol, 3.0 equiv) was added. The reaction mixture was allowed to stir at RT overnight. Product formation was confirmed by LCMS. The reaction mixture was diluted with water (25 mL) and extracted with ethyl acetate (50 mL x 2). Combined organic layer was washed with water (20 mL x 4), dried over anhydrous NaaSOr and concentrated. The crude product was purified by reverse phase HPLC to obtain 5-chloro-N-(4-(2-(4-chloro-3-fluorophenoxy)acetamido)piperidin-l- yl)benzofuran-2-carboxamide (Compound 2 – 20 mg, 12 % yield) as an off white solid. LCMS 480 i H | +; H NMR (400MHz, DMSG-de) d 9 79 (s, 1 H), 8.08 (d, J= 7.5 Hz, 1 H), 7.86 (s, 1 H), 7.70 (d, J= 9.2 Hz, 1 H), 7.54 – 7.38 (m, 3 H), 7.08 (d, J= 8 8 Hz, 1 H), 6.86 (d, .7= 11.8 Hz, 1 H), 4.53 (s, 2 H), 3.66 (br. s., I H), 2.99 (br. s., 2 H), 2.78 (br. s, 2 H), 1.75 (br. s., 2 H), 1.66 (br. s., 2 H)

10242-10-1, 10242-10-1 5-Chlorobenzofuran-2-carboxylic acid 937838, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; PRAXIS BIOTECH LLC; DELGADO OYARZO, Luz Marina; URETA DIAZ, Gonzalo Andres; PUJALA, Brahmam; PANPATIL, Dayanand; BERNALES, Sebastian; CHAKRAVARTY, Sarvajit; (0 pag.)WO2019/236710; (2019); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.37418-88-5,4-Hydroxyisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

In a 20 mL glass vial, a mixture of 3-hydroxyphthalic anhydride (500 mg, 3.05 mmol, 1 equiv), potassium acetate (927 mg, 9.44 mmol, 3.1 equiv) and 3-aminopiperidine-2,6-dione hydrochloride (552 mg, 3.35 mmol, 1.1 equiv) in acetic acid (10.2 mL, 0.3 M) was heated to 90 oC overnight. The black reaction mixture was cooled to room temperature and diluted to 20 mL with water, and subsequently cooled on ice for 30 min. The resulting slurry was transferred to a 50 mL Falcon tube, which was centrifuged at 3500 rpm for 5 min. The supernatant was discarded and the black solid was transferred to a 250 mL RBF with methanol and concentrated in vacuo. The residue was purified by flash column chromatography on silica gel (CH2Cl2:MeOH (9:1)) to afford the title compound as a white solid (619 mg, 74%).1H NMR (400 MHz, DMSO-d6) delta 11.07 (s, 1H), 7.65 (dd, J = 8.4, 6.8 Hz, 1H), 7.31 (d, J = 6.8 Hz, 1H), 7.24 (d, J = 8.4 Hz, 1H), 5.06 (dd, J = 12.8, 5.4 Hz, 1H), 2.94- 2.82 (m, 1H), 2.64- 2.43 (m, 2H), 2.08- 1.97 (m, 1H); MS (ESI) calcd for C13H11N2O5 [M+H]+ 275.07, found 275.26.

37418-88-5, 37418-88-5 4-Hydroxyisobenzofuran-1,3-dione 96580, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; DANA-FARBER CANCER INSTITUTE, INC.; BUCKLEY, Dennis; WINTER, Georg; PHILLIPS, Andrews, J.; HEFFERNAN, Timothy, P.; BRADNER, James; ROBERTS, Justin; BEHNAM, Nabet; (544 pag.)WO2018/148443; (2018); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

6940-49-4, 3-Bromophthalide is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Amine (1.05 Equiv) was added to Isatoic anhydride (1.0 Equiv) in water (4.0mL) and PEG400 (1.0mL) at RT and stirred for 1-2 hr. Upon completion of SM by TLC, added 3-bromoisobenzofuran-1(3H)-one (1.1 Equiv) and warm the reaction mixture to 90-95 C and maintained for 10-14 h. After completion of the reaction, cool the reaction mass up to 25-30 C and product was filtered and further purified via column chromatography through silica gel stationary phase and Ethyl acetate & Heptane mixture as eluent., 6940-49-4

As the paragraph descriping shows that 6940-49-4 is playing an increasingly important role.

Reference£º
Article; Madhubabu; Shankar; Reddy, G. Rajeshwar; Rao, T. Srinivasa; Basaveswara Rao, Mandava V.; Akula, Raghunadh; Tetrahedron Letters; vol. 57; 46; (2016); p. 5033 – 5037;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.128851-73-0,6-Bromobenzofuran,as a common compound, the synthetic route is as follows.

The 2-position of the 6-bromobenzofuran (3.8 g) was protected with a trimethysilyl group as described in Example 5, to provide 2.4 g of 2-trimethylsilyl-6-bromobenzofuran., 128851-73-0

As the paragraph descriping shows that 128851-73-0 is playing an increasingly important role.

Reference£º
Patent; Eli Lilly and Company; US5169860; (1992); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.28418-88-4,4-Iodoisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

(3-1). Production of 3-iodo-N-(4-heptafluoroisopropyl-2-methylphenyl)phthalimide To a suspension of 2.7 g of 3-iodophthalic anhydride in 30 ml of acetic acid was added 2.7 g of 4-heptafluoroisopropyl-2-methylaniline, and the resulting mixture was heated under reflux for 3 hours. After completion of the reaction, the solvent was distilled off under reduced pressure from the reaction mixture, and the resulting residue was purified by silica gel column chromatography to obtain 4.8 g of the desired compound. Yield: 89%.

28418-88-4, 28418-88-4 4-Iodoisobenzofuran-1,3-dione 282071, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Nihon Nohyaku Co., Ltd.; EP1241159; (2002); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem