Category: benzofuran

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.76429-69-1,5-Chloro-2,3-dihydrobenzofuran,as a common compound, the synthetic route is as follows.

76429-69-1, Intermediate 10: 5-chloro-7-nitro-2,3-dihydro-1 -benzofuran; To a mixture of 5-chloro-2,3-dihydro-1-benzofuran (prepared by the method of :Ramon J. Alabaster*, Ian F. Cottrell, Hugh Marley, Stanley H. B. Wright Synthesis (1988), (12), 950-952) (4.3g) in glacial acetic acid (20ml) and concentrated sulphuric acid (4ml) at 1000C was added concentrated nitric acid (1.57ml) and glacial acetic acid (1 ml). After forty five minutes, the mixture was allowed to cool and dissolved in dichloromethane (250ml). The organic layer was washed with water (250ml), 1 M ammonium hydroxide (250ml) and water (250ml) and then dried (MgSO4) and evaporated. The solid was dissolved in dichloromethane and applied to a column and the column eluted to afford the title compound as a yellow solid (3.4g).

As the paragraph descriping shows that 76429-69-1 is playing an increasingly important role.

Reference£º
Patent; Glaxo Group Limited; WO2007/88168; (2007); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

42933-43-7, 2,3-Dihydrobenzofuran-5-amine is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3: Preparation of 5-acetylamino-2,3-dihydrobenzofuran [Show Image] The product (5.2 g, 38.5 mmol) obtained in Step 2 was dissolved in AcOH (20 mL) and Ac2O (5 mL), heated to 60¡ãC, reacted for 12 h, and concentrated to obtain a crude product (6 g, 88.0percent).

42933-43-7, The synthetic route of 42933-43-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Xuanzhu Pharma Co., Ltd.; EP2532665; (2012); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.641-70-3,3-Nitrophthalic anhydride,as a common compound, the synthetic route is as follows.

641-70-3, Synthesis of 2-[4-(2-Chloroethoxy)benzoyl]-4-nitroindan-1,3-dione: To a suspension of 1-[4-(2-chloroethoxy)phenyl]-4,4,4-trifluorobutane-1,3-dione (59.3 g, 201 mmol) and 3-nitrophthalic anhydride (38.9 g, 201 mmol) at 0 C. in acetic anhydride (114 mL) was added triethylamine (41 g, 403 mmol). The mixture slowly turned deep red and became homogeneous. The reaction was allowed to warm to room temp. overnight. The reaction mixture was cooled to 0 C. and 2N HCl (600 mL) was added slowly. The mixture was vigorously stirred for 45 min. at room temp. until a brown granular ppt formed. The brown solid was collected by filtration, resuspended in H2O (250 mL) and stirred for 20 min. The brown solid was filtered and dried under vacuum. The crude reaction product was suspended in EtOH (500 mL) and then heated to boiling. The solution slowly turned deep red and the solid became bright yellow. The suspension was allowed to cool to room temp. The product was collected by filtration and dried under vacuum to give the triketone as a bright yellow solid (45 g, 60% yield).

641-70-3 3-Nitrophthalic anhydride 21631, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Bockovich, Nicholas; Kluge, Arthur; Ram, Siya; Wang, Zhonghuo; Oalmann, Chris; Murthi, Krishna K.; US2003/162797; (2003); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

13391-28-1, 5-Methoxybenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of substrate 1 (1.0 mmol, 1 equiv), NaSO2CF2Br (23.4 mg, 2.0 mmol, 2.0 equiv) in CH2Cl2 (7.0 mL) and CH3CN (3.5 mL) at room temperature was slowly added TBHP (5.0-6.0 M in decane, 1.4 mL, 7 equiv). The reaction was then stirred for 16 h. After the reaction was complete, the reaction mixture was concentrated under vacuum and the crude product was purified by column chromatography on silica gel to give the product.

13391-28-1, 13391-28-1 5-Methoxybenzofuran 25943, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Zhang, Jin; Xu, Xiu-Hua; Qing, Feng-Ling; Tetrahedron Letters; vol. 57; 22; (2016); p. 2462 – 2464;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

496-16-2, 2,3-Dihydrobenzo[b]furan is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(1) 4-(2,3-dihydro-1-benzofuran-5-yl)-4-oxobutanoic acid To a suspension of 2,3-dihydro-1-benzofuran (5.2 g) and succinic anhydride (5.2 g) in dichloromethane (30 mL) was gradually added aluminum chloride (14.4 g) under ice-cooling, and the mixture was heated with stirring at 50¡ãC for 0.5 hr. The reaction mixture was cooled, and poured into concentrated hydrochloric acid (100 mL)-ice. The mixture was stirred for 1 hr, and extracted with ethyl acetate. The obtained organic layer was washed with water, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure, and the obtained residue was recrystallized from ethyl acetate to give 4-(2,3-dihydro-1-benzofuran-5-yl)-4-oxobutanoic acid as crystals (3.8 g). 1H-NMR (CDCl3) delta: 2.80 (2H, t, J=6.0 Hz), 3.26(4H, m), 4.67(2H, t, J=9.0 Hz), 6. 82 (1H, d, J=8.4 Hz), 7.85(2H, m)

496-16-2, 496-16-2 2,3-Dihydrobenzo[b]furan 10329, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Takeda Pharmaceutical Company Limited; EP1845081; (2007); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

7169-34-8, Benzofuran-3(2H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,7169-34-8

General procedure: To a solution of benzofuran-3(2H)-one (134mg, 1mmol) in dry methanol (20mL) at room temperature was added the appropriate aldehyde (1.2mmol) and Al2O3 (1mmol). The mixture was refluxed, under N2, for 48h. After, the solvent was removed and the solid residue was dissolved in CH2Cl2. The organic layer was washed with water, dried with anhydrous Na2SO4 and concentrated under reduced pressure to give the crude product.

The synthetic route of 7169-34-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Carrasco, Marta P.; Newton, Ana S.; Goncalves, Lidia; Gois, Ana; Machado, Marta; Gut, Jiri; Nogueira, Fatima; Haenscheid, Thomas; Guedes, Rita C.; Dos Santos, Daniel J.V.A.; Rosenthal, Philip J.; Moreira, Rui; European Journal of Medicinal Chemistry; vol. 80; (2014); p. 523 – 534;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

32703-79-0, 5-(tert-Butyl)isobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

4-Isobutylphthalic anhydride (500 mg, 2.45 mmol) and 4-aminobutyric acid (260 mg, 2.5 mmol) were added to glacial acetic acid (10 mL), and the mixture was heated to 100 C for 3 h. The reaction was quenched with water (10 mL) and the NaOH solution (0.1 mol/L) was adjusted to pH 6-8. Dichloromethane extraction (10mL ¡Á 3), washed with saturated NaHCO3 solution, washed with water, combined with organic phase, dried over anhydrous sodium sulfateDry and dry, 640mg of yellow solid,LC-MS and 1 H-NMR confirmed the expected intermediate compound, yield 87.5%.

32703-79-0, As the paragraph descriping shows that 32703-79-0 is playing an increasingly important role.

Reference£º
Patent; Chinese Academy Of Medical Sciences Pharmaceutical Institute; Chinese Academy Of Sciences Animal Institute; Wu Song; Zhou Qi; Zhang Wenxuan; Wu Jun; Wu Hongna; Hao Jie; Wang Liu; (88 pag.)CN109867661; (2019); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

115010-11-2, 2,3-Dihydro-1-benzofuran-5-sulfonoylchloride is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

2,3-Dihydro-benzofuran-5-sulfonyl chloride (24.05 mg, 0.11 mmol) was added to a solution of 3-(2,2a,4,5-Tetrahydro-1H-3-aza-acenaphthylen-3-yl)-propylamine dihydro-chloride (28.92 mg, 0.1 mmol) and N,N’-diisopropylethylamine (51.7 mg, 0.4 mmol) in CH2Cl2 (10 mL) and the mixture was stirred overnight at room temperature. The resulting solution was washed with water (3 x 10 mL), dried over Na2SO4 and evaporated to dryness. The free base was dissolved in ethyl acetate (1 ml). A 2,8 M solution of hydrogen chloride in ethanol (0.10 mL) was then added. The product was crystallized and collected by filtration, and vacuum dried to give a white solid (33 mg, 77%). 1H NMR (300 MHz, DMSO-D6) delta ppm 1.92 (m, 4 H) 2.56 (m, 1 H) 2.83 (m, 4 H) 3.09 (m, 3 H) 3.24 (m, 2 H) 3.39 (m, 1 H) 3.77 (d, J=11.13 Hz, 1 H) 4.62 (m, 3 H) 6.93 (d, J=8.49 Hz, 1 H) 7.08 (d, J=7.47 Hz, 1 H) 7.17 (m, 1 H) 7.26 (t, J=7.47 Hz, 1 H) 7.60 (m, 3 H) 10.27 (br, 1 H) MS (APCI (M+H)+): 399, 115010-11-2

As the paragraph descriping shows that 115010-11-2 is playing an increasingly important role.

Reference£º
Patent; LABORATORIOS DEL DR. ESTEVE, S.A.; EP1676840; (2006); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

54008-77-4, 2-Bromobenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

54008-77-4, General procedure: To a stirred solution of 2-bromobenzofuran/2-bromobenzo[b]thiophene (2.53 mmol) in ethanol (5 mL) was added hydrazine(0.08 g, 2.53 mmol), I2 (0.03 g, 10 mol%) and alkanone (2.53 mmol).The reaction mixture was reuxed for 1e3 h. After completion ofthe reaction as monitored by TLC, the reaction mixture wasquenched with a saturated aqueous solution of Na2S2O3. Theorganic and aqueous layers were then separated. The aqueous layerwas extracted with ethyl acetate (3 50 mL). The extract waswashed with water and nally with brine. The organic layer wasdried over anhydrous Na2SO4 and concentrated by rotary evapo-rator. Finally, the residue was puried by recrystallization from ethanol.

The synthetic route of 54008-77-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Chacko, Priya; Shivashankar, Kalegowda; Tetrahedron; vol. 74; 13; (2018); p. 1520 – 1526;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.35700-40-4,2,3-Dihydrobenzofuran-7-carboxylic acid,as a common compound, the synthetic route is as follows.

A solution of 2,3-dihydrobenzofuran-7-carboxylic acid (1.0g, 6.09 mmol, 1.0 equiv.), dimethylmethoxyamine hydrochloride (654 mg, 6.7 mmol, 1.1 equiv.), diisopropylethylamine (DIEA) (2.35 ml, 13.4 mmol, 2.2 equiv.), benzotriazole-1-yl-oxy-tris-pyrrolidinophosphonium hexafluorophosphate (PyBOP) (3.48g, 6.7 mmol, 1.1equiv.) and 4-dimethylaminopyridine (DMAP) (74 mg, 0.67 mmol, .1 equiv.) in anhydrous THF (20 ml) was stirred for 18hr under argon. The reaction mixture was then diluted with EtOAc (100 ml) and washed with aqueous sat. NaHCO3 (2×150 ml) and aqueous 1N HCl (2 x 150 ml), the oragnic layer was dried over MgSO4, filtered and solvent removed. yield : 1.06 mg, 84 %. LS-MS calcd 207, found 208. To a solution of the amide (950 mg, 4.59 mmol, 1.0 equiv.) in anhydrous THF (20 ml) was cooled to -5C under argon, was slowly added 1.0 M LAH in THF (9.1 ml, 9.14 mmol, 1.5 equiv.), the reaction mixture was stirred for 1 hr at -5C- A solution of aqueous 1 N HCl (150 ml) was slowly added to the reaction mixture, and extracted with EtOAc (50 ml). The organic layer was washed with aqueous 1 N HCl (150 ml), the organic layer was collected and dried over MgSO4, filter and solvent removed under reduced pressure to yield the aldhyde. Yield: 620 mg, 91%. LR-MS calcd 148, found 149.

35700-40-4, The synthetic route of 35700-40-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BRISTOL-MYERS SQUIBB COMPANY; EP1041980; (2005); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem