Tag: M.W:200-300

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.64169-34-2,5-Bromoisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

Step A: 5-(l,3-dioxolan-2-ylmethyl)-2-benzofuran-l(3H)-one A three-neck 5L round bottomed flask equipped with a stir bar, firestone valve, thermocouple, condenser and heating mantle was charged with tri-t-butyl phosphonium tetrafluoroborate (500 mg, 1.7 mmol), palladium (II) acetate (250 mg, 1.1 mmol) and 5-bromo-2-benzofuran-l(3H)-one (100 g, 470 mmol). DMF (1.9 L) was added to the flask, and the mixture was degassed three times by alternating vacuum and nitrogen purge. Commercially available bromo(l ,3-dioxolan- 2-ylmethyl)zinc solution (1.0 L, 520 mmol) was added via canula and the mixture was again degassed three times. The mixture was then heated at 85 C for 5 h. Analysis by HPLC-MS indicated the reaction was not complete. The mixture was stirred at 85 C for 5 more h. The mixture was then allowed to return to room temperature for overnight. 2-methyltetrahydrofuran (2.0 L) and brine were added, and the mixture was stirred for 5 min. The layers were separated and the aqueous layer was extracted again with 2-methyltetrahydrofuran. The organic layers were combined, washed three times with brine, dried over MgSC”4, filtered, and concentrated. The resulting residue was purified by flash chromatography (1.5 kg silica cartridge), eluting with 0->20% ethyl acetate in dichloromethane to afford 5-(l,3-dioxolan-2-ylmethyl)-2-benzofuran- l(3H)-one. MS: m/z 221 (M+l)+.

64169-34-2, As the paragraph descriping shows that 64169-34-2 is playing an increasingly important role.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; WALSH, Shawn; PASTERNAK, Alexander; CATO, Brian; FINKE, Paul, E.; FRIE, Jessica; FU, Qinghong; KIM, Dooseop; PIO, Barbara; SHAHRIPOUR, Aurash; SHI, Zhi-Cai; TANG, Haifeng; WO2013/39802; (2013); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

10242-11-2, 5-Bromobenzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Example 10 To a 100ml flask was added with 5-bromo-2-carboxybenzofuran (4.82g, 0.02mol), piperazine (3.44g, 0.04mol), copper chloride (0.27g, 0.002mol), and dimethyl sulfoxide (50ml), and was heated with stirring at 150 C reaction. The reaction was monitored by thin layer chromatography, after the end of the reaction,The solvent was removed, 10ml of diethyl ether was added to the system, with vigorous stirring, to precipitate a solid.The solid was recrystallized from ethyl acetate to give 5-piperazin-2-carboxybenzofuran 3.34g, 68% yield., 10242-11-2

As the paragraph descriping shows that 10242-11-2 is playing an increasingly important role.

Reference£º
Patent; Shaanxi Buchang Hi-Tech Pharmaceutical Co., Ltd; Zhao, Buzhang; Zhao, Chao; (9 pag.)CN103467422; (2016); B;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

10242-12-3, 5-Nitrobenzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a suspension of 5-nitro-2-benzofurancarboxylic acid (5 g, 24.15 mmol) in CH2Cl2 (250 mL) at 0 C. was added DMF (0.100 mL) followed by (COCl)2 (2M in CH2Cl2, 36.23 mL, 72.46 mL) over a period of 10 min. The reaction was stirred at 0 C. for 1 h and then at room temperature for 30 min. The reaction solvent was removed under a reduced pressure, dried under high vacuum and again suspended in CH2Cl2 (250 mL). The solution was cooled to 0 C., were added pyridine (4.8 mL, 48.03 mmol) followed by McOH (10 mL, excess) and stirred overnight. The extractive work-up with CH2Cl2 gave the expected 2-methoxycarbonyl-5-nitrobenzofuran (R926609). 1H NMR (CDCl3): delta 8.66 (d, 1H, J=2.4 Hz), 8.36 (dd, 1H, J=2.4 and 9.6 Hz), 7.71 (d, 1H, J=9.3 Hz), 7.65 (s, 1H), 4.01 (s, 3H); LCMS: ret. time: 26.94 min.

10242-12-3, As the paragraph descriping shows that 10242-12-3 is playing an increasingly important role.

Reference£º
Patent; RIGEL PHARMACEUTICALS, INC.; Singh, Rajinder; Argade, Ankush; Payan, Donald; Molineaux, Susan; Holland, Sacha; Clough, Jeffrey; Keim, Holger; Bhamidipati, Somasekhar; Sylvain, Catherine; Li, Hui; Rossi, Alexander; US2015/266828; (2015); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

799766-13-5,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.799766-13-5,7-Bromo-4-methylbenzofuran,as a common compound, the synthetic route is as follows.

To a solution of 7-bromo-4-methylbenzofuran (9.61 g) in THF (228 mL) at -78 ¡ãC was slowly added 2.5 M nBuLi in hexanes (21.9 mL, 54.6 mmol, 1.2 equiv). The resultant reaction mixture was stirred for 1 h, then quenched by the addition of water. The mixture was allowed to warm to RT extracted with EtOAc. The organic extracts were dried over Na2SO4 and evaporated. The oily residue was heated at 80 ¡ãC in the presence of CaH2, then distilled under vacuum at 110 ¡ãC to afford the product as a clear oil(4.51 g, 75percent). ?H NMR (500 MHz, CDC13) (57.64 (d, I = 2.2 Hz, 1H), 7.40 (d, I = 7.8 Hz, 1H), 7.22 (dd, I = 8.2, 7.3 Hz, 1H), 7.06 (m, 1H), 6.81 (d, I = 2.2 Hz, 1H), 2.54 (s, 3H).

As the paragraph descriping shows that 799766-13-5 is playing an increasingly important role.

Reference£º
Patent; FORUM PHARMCEUTICALS INC.; ACHARYA, Raksha; BURNETT, Duane, A.; BURSAVICH, Matthew, Gregory; COOK, Andrew, Simon; HARRISON, Bryce, Alden; MCRINER, Andrew, J.; (451 pag.)WO2016/201168; (2016); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.81742-10-1,3,6-Dichlorotrimellitic Anhydride,as a common compound, the synthetic route is as follows.,81742-10-1

General procedure: The synthetic steps of MPc (COOH) 4Cl8 (Scheme 1). A mixture of1.0025 g of 3,6-dichloro-1,2,4-benzenetricarboxylic anhydride,6.0000 g of urea, 0.3654 g of Mn(CH3COOH)2¡¤4H2O, 0.25 g of NH4Cland 0.1200 g of (NH4)2Mo2O7 in 100 mL three-necked flask was heatedat 140 C for 0.5 h with magnetic stirrer and reflux condenser, and thenkept at 220 C for 6 h under ambient air conditions. The by-productswere washed with water followed by 6 mol L-1 hydrochloric acid forseveral times. Then the purification of blue solid was achieved by refluxingwith 150 mL of acetone and trichloromethane about 12 h.The obtained octachloro-tetracarboxamide phthalocyanine was hydrolyzedwith 100 mL of 2.0 mol¡¤L-1 sodium hydroxide solution at 100 C for 12 h, filtered, and the filtrate was adjusted to pH=1 withhydrochloric acid, a large amount of precipitates were produced andfiltered by the G4 sand core funnel, the filter cake was washed first withdeionized water until the filtrate was neutral. Then the filter cake waswashed with in proper order. The solid product was vacuum dried at100 C. The as-prepared MPcTcCl8 were washed by chloroform,ethanol, ether, acetone and THF respectively, dried in vacuum overnightat 100 C.

81742-10-1 3,6-Dichlorotrimellitic Anhydride 15883776, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Gao, Min; Zhang, Gai; Tian, Min; Liu, Bulei; Chen, Weixing; Inorganica Chimica Acta; vol. 485; (2019); p. 58 – 63;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.64169-34-2,5-Bromoisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

A three-neck 5L round bottomed flask equipped with a stir bar, firestone valve, thermocouple, condenser andheating mantle was charged with tri-t-butyl phosphonium tetrafluoroborate (500 mg, 1.7 mmol), palladium (II) acetate(250 mg, 1.1 mmol) and 5-bromo-2-benzofuran-1(3H)-one (100 g, 470 mmol). DMF (1.9 L) was added to the flask, andthe mixture was degassed three times by alternating vacuum and nitrogen purge. Commercially available bromo(1,3-dioxolan-2-ylmethyl)zinc solution (1.0 L, 520 mmol) was added via canula and the mixture was again degassed threetimes. The mixture was then heated at 85 C for 5 h. Analysis by HPLC-MS indicated the reaction was not complete.The mixture was stirred at 85 C for 5 more h. The mixture was then allowed to return to room temperature for overnight.2-methyltetrahydrofuran (2.0 L) and brine were added, and the mixture was stirred for 5 min. The layers were separatedand the aqueous layer was extracted again with 2-methyltetrahydrofuran. The organic layers were combined, washedthree times with brine, dried over MgSO4,filtered, and concentrated. The resulting residue was purified by flash chromatography(1.5 kg silica cartridge), eluting with 0->20% ethyl acetate in dichloromethane to afford 5-(1,3-dioxolan-2-ylmethyl)-2-benzofuran-1(3H)-one. MS: m/z 221 (M+1)+.

64169-34-2, As the paragraph descriping shows that 64169-34-2 is playing an increasingly important role.

Reference£º
Patent; Merck Sharp & Dohme Corp.; WALSH, Shawn; PASTERNAK, Alexander; CATO, Brian; FINKE, Paul, E.; FRIE, Jessica; FU, Qinghong; KIM, Dooseop; PIO, Barbara; SHAHRIPOUR, Aurash; SHI, Zhi-Cai; TANG, Haifeng; (136 pag.)EP2755656; (2016); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

6296-53-3,6296-53-3, N-(1,3-Dioxo-1,3-dihydroisobenzofuran-4-yl)acetamide is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

10213] A stirred solution of 1-(3-ethoxy-4-methoxyphe- nyl)-2-methyl sulfonylethylamine (1.0 g, 3.7 mmol) and 3-acetamidophthalic anhydride (751 mg, 3.66 mmol) in acetic acid (20 mL) was heated at reflux for 15 h. The solvent was removed in vacuo to yield an oil. Chromatography of the resulting oil yielded the product as a yellow solid (1.0 g, 59% yield): mp, 144 C.; ?H NMR (CDC13) oe: 1.47 (t, J=7.0 Hz, 3H, CH3), 2.26 (s, 3H, CH3), 2.88 (s, 3H, CH3), 3.75 (dd, J=4.4, 14.3 Hz, 1H, CH), 3.85 (s, 3H, CH3), 4.11 (q, J=7 Hz, 2H, CH2), 5.87 (dd, J=4.3, 10.5 Hz, 1H, NCH), 6.82-6.86 (m, 1H, Ar), 7.09-7.11 (m, 2H, Ar), 7.47 (d, J=7 Hz, 1H, Ar), 7.64 (t, J=8 Hz, 1H, Ar), 8.74 (d, J=8 Hz, 1H, Ar), 9.49 (br s, 1H, NH); ?3CNMR (CDC13) oe: 14.61,24.85,41.54,48.44,54.34, 55.85, 64.43, 111.37, 112.34, 115.04, 118.11, 120.21, 124.85, 129.17, 130.96, 136.01, 137.52, 148.54, 149.65, 167.38,169.09, 169.40; Anal Calc?d. for C22H24N075: C, 57.38; H, 5.25; N, 6.08. Found: C, 57.31; H, 5.34; N, 5.83.

As the paragraph descriping shows that 6296-53-3 is playing an increasingly important role.

Reference£º
Patent; Celgene Corporation; CHEN, Ming J.; HUI, HO-WAH; SHEN, XIAOLE; (48 pag.)US2016/128981; (2016); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

10242-12-3, 5-Nitrobenzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Compound 11 (0.414 g, 2 mmol), dichloromethane (5 mL), DMF (0.1 mL) was added to the reaction flask,(0.519 g, 6 mmol) oxalyl chloride. The reaction solution was allowed to stand at room temperature for 2 hours and concentrated. The residue was dissolved in acetone at 0 C, and then concentrated aqueous ammonia (7.5 mL) was added dropwise. The mixture was stirred for 10 minutes. A large amount of water was added to the reaction solution to precipitate a solid, And dried to give 0.28 g of compound 12 in a yield of 68%., 10242-12-3

Big data shows that 10242-12-3 is playing an increasingly important role.

Reference£º
Patent; Luoyang Juhui Pharmaceutical Technology Co., Ltd.; Zhang Hongli; Yang Songfeng; (36 pag.)CN106749203; (2017); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

10242-12-3, 5-Nitrobenzofuran-2-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Under nitrogen protection conditions, 5 mL of anhydrous dichloromethane was addedNitrobenzofuran-2-carboxylic acid (23 mg, 0.11 mmol)After stirring at room temperature, HOBt (18 mg, 0.13 mmol) was added,After stirring for 10 minutes, EDC ¡¤ HCl (25 mg,0.13 mmol) followed by the addition of compound III-8-a of Example 6(50 mg, 0.17 mmol) and DIPEA (0.04 mL, 0.22 mmol)TLC after 15 hours showed complete reaction,The reaction solution was washed with 5% NaHCO3 solution, 10% citric acid solution,5% NaHCO3 solution and saturated brine,Adding to the organic phase anhydrous sodium sulfate drying, drying and filtering,The solvent was removed using a rotary evaporator and the product was added directly to 5 mL of methanol,After stirring at room temperature, 2-methylpropylboronic acid (22 mg, 0.22 mmol) was added5 mL of n-hexane, followed by the addition of 1 M HCl solution (0.33 mL, 0.33 mmol)After 5 hours, the TLC assay showed complete reaction, the reaction solution was allowed to stand,The lower layer was washed with n-hexane, dried over anhydrous sodium sulfate,Drying after filtration, the use of rotary evaporator in addition to solvent,Column chromatography (dichloromethane: methanol = 60: 1) gave 17 mg of a yellow solid,Yield 48%, 10242-12-3

The synthetic route of 10242-12-3 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Fudan University; Shao Liming; Xu Yulong; Chen Yiyi; Li Wei; Xie Qiong; (36 pag.)CN107151255; (2017); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

64169-34-2, 5-Bromoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Add phenol (20.4g, 0.22mol) and DMF 50mL to the reaction flask and start stirring.5-Bromoisobenzofuran-1(3H)-one (34.0 g, 0.16 mmol), acetylacetone (3.2 g, 0.03 mol), cuprous bromide (3.6 g, 0.03 mol), potassium carbonate (at room temperature) 30.8g, 0.22mol), three times of nitrogen replacement, heating to 90 C, stirring reaction overnight, adding 1000 mL of purified water to the reaction solution, suction filtration, the filter cake was dissolved in 800 mL of dichloromethane, and the organic phase was washed with 800 mL of 1N hydrochloric acid solution, with purified water. 1000 mL washing, drying the organic phase, and concentrating to dryness under reduced pressure to give a yellow solid.The title compound 2b (22.5 g, 63%) was obtained.

64169-34-2, 64169-34-2 5-Bromoisobenzofuran-1(3H)-one 603144, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Sichuan Kelun Botai Bio-pharmaceutical Co., Ltd.; Cai Jiaqiang; Xie Yinong; You Zejin; Song Changwei; Zhang Jichao; Li Lu; Zhang Qiaoling; Wang Yongqiang; Chen Xing; Jiao Shihu; Li Youqiang; Wang Tao; Zeng Hong; Song Hongmei; Ye Qijun; Su Donghai; Zhou Xin; Zhang Shaohua; Wang Lichun; Wang Jingyi; (122 pag.)CN108341777; (2018); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem