Category: benzofuran

57319-65-0,57319-65-0, 6-Aminoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

EXAMPLE 111 6,7-Diethoxy-4-(3-oxo-1,3-dihydro-isobenzofuran-5-ylamino)-quinoline-3-carbonitrile A solution of 400 mg (1.44 mM) of 4-chloro-6,7-diethoxy-quinoline-3-carbonitrile, 230 mg (1.54 mM) of 6-Aminophthalide and 161 mg of pyridine hydrochloride in 12 ml of 2-methoxyethanol was refluxed for 3 hours. To the warm solution was added 1 ml of 1M sodium carbonate and the sample was heated for 5 minutes at 100 C., then poured into 300 ml of ice water. The solid was collected, washed with water followed by ether and dried under vacuum at 80 C. to yield 535 mg of 6,7-Diethoxy-4-(3-oxo-1,3-dihydro-isobenzofuran-5-ylamino)-quinoline-3-carbonitrile as a white solid: mass spectrum (electrospray, m/e): M+H 390.1, mp=280-284 C.

As the paragraph descriping shows that 57319-65-0 is playing an increasingly important role.

Reference£º
Patent; American Cyanamid Company; US6288082; (2001); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

166599-84-4, Benzofuran-4-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

TBTU (1.24 mmol, 1.05eq) is added to a solution of the respective carboxylic acid (1.18 mmol, l.Oeq), (lS,3S,5S)-3-aminomethyl-2-aza-bicyclo[3.1.0]hexane-2-carboxylic acid tert-butyl ester (1.18 mmol, l.Oeq) and DIPEA (1.77 mmol, 1.5eq) in DCM, DMF or acetonitrile (10 mL). After 2h the mixture is washed with water, hydrochloric acid (0.5 M) and water. The organic layer is dried over Na2SO4, the solvents are removed in vacuo and the residue is purified by prep. HPLC or by flash chromatography (EtO Ac/heptane).(lS,3S,5S)-3-{[(benzofuran-4-carbonyl)-amino]-methyl}-2-aza-bicyclo[3.1.0]hexane-2- carboxylic acid tert-butyl ester prepared by reaction of (lS,3S,5S)-3-aminomethyl-2-aza-bicyclo[3.1.0]hexane-2- carboxylic acid tert-butyl ester with benzofuran-4-carboxylic acid (M.A. Eissenstat et al. J. Med. Chem. 1995, 38, 3094-3105). LC-MS (acidic): tR = 1.00 min; [M+H]+ = 357.1. 1H- NMR (CDCl3): delta = 0.58 (bs, IH); 0.80-0.86 (m, IH); 1.52 (s, 9H); 1.52-1.59 (m, IH); 1.79 (bd, J = 13.3 Hz, IH); 2.51-2.60 (m, IH); 3.24-3.30 (m, IH); 3.60-3.64 (m, 2H); 4.45-4.52 (m, IH); 7.32 (t, J = 7.9 Hz, IH); 7.47 (bs, IH); 7.61 (d, J = 8.2 Hz, IH); 7.65 (d, J = 7.5 Hz, IH); 7.70 (bs, IH); 8.43 (bs, IH).

166599-84-4, As the paragraph descriping shows that 166599-84-4 is playing an increasingly important role.

Reference£º
Patent; ACTELION PHARMACEUTICALS LTD; WO2008/81399; (2008); A2;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.28418-88-4,4-Iodoisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

To the beaker 1 was added 10.0 g of 1.1-dimethyl-2-methylthioethylamine (0.084 mol) and 15.6 g at 20-35 C.Acetone; 17.7 g of 3-iodophthalic anhydride (0.065 mol) and 70 g of acetone were added to beaker 2, and stirred with a glass rod for 5 minutes.After the clock, the solid is completely dissolved; in the beaker 1, the liquid A is pumped into the mixer by the mechanical pump A, and at the same time, the liquid B in the beaker 2 is also used by the mechanical pump B.Pumped into the mixer, the flow ratio of mechanical pump A to mechanical pump B is 1:3.43 (mass ratio), and the liquid in the mixer enters the operation.In a microchannel reactor with a temperature of 8 C, the retention time in the microchannel reactor was 10 minutes, and the cone was received and discharged.The reaction solution was evaporated under reduced pressure to give a pale yellow solid: 24.3 g, yield: 95.7% (3-iodophthalic anhydrideThe main product content is: 96% (HPLC), the isomer content is 2.6% (HPLC),, 28418-88-4

28418-88-4 4-Iodoisobenzofuran-1,3-dione 282071, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Changzhou Woteng Chemical Technology Co., Ltd.; Liu Zuhe; Yao Yuan; Lu Wenlong; Cao Li; (7 pag.)CN109574892; (2019); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

23145-07-5, 5-Bromobenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Inside an argon atmosphere glove box, halide (0.5mmol), boronic acid (0.75mmol), K3PO4 (1.5mmol), PPPd (4mg, 1.4wt% Pd, 0.0005mmol), solvent (2ml, H2O/EtOH v/v=2:3) were mixed in a 5ml vessel and sealed. Then it was moved out of the glove box and heated in an oil bath to 80C for 2-6h. After cooled down to r.t. for about half an hour, the mixture was filtered. Take a small amount of the liquid for GC analysis. The solid part was washed three times with ethanol. The combined liquid was dried and purified by column to give pure coupling product. For recycle experiments, the solid part after washing was degassed and used into the next cycle. Combing the recycled catalyst from X reaction times was marked as Re-PPPd-X.

23145-07-5, 23145-07-5 5-Bromobenzofuran 90015, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Wang, Xinbo; Min, Shixiong; Das, Swapan K.; Fan, Wei; Huang, Kuo-Wei; Lai, Zhiping; Journal of Catalysis; vol. 355; (2017); p. 101 – 109;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.652-39-1,4-Fluoroisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

652-39-1, The best result occurs when the starting material is run 0.5 M in formamide and heated to 125 ¡ãC for 1 to 5 h depending on scale. Starting material is not soluble in fonnamide until the temperature is > 60 ¡ãC. Upon completion of reaction as monitored by LC/MS (apcineg), the heat is removed and 3 times the volume of the reaction of water is added. Next, the reaction is allowed to warm to room temperature and stirred until a pale yellow precipitate has formed. The yellow solid product is filtered off and washed with water before drying overnight to give yields between 70-77 percent.

As the paragraph descriping shows that 652-39-1 is playing an increasingly important role.

Reference£º
Patent; INTERMUNE, INC.; ARRAY BIOPHARMA INC.; WO2005/37214; (2005); A2;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

19477-73-7, 6-Bromoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

10196] 3,6-Dibromoisobenzofuran-1(3H)-one (21a) In a SOmE round bottom flask was added 6-bromoisobenzothran- 1(3H)-one (1.00 g, 4.69 mmol), N-bromosuccinimide (958 mg, 5.38 mmol), 2,2?-azobis(2-methylpropionitrile) (75 mg, 0.46 mmol), and chloroform (23 mE). The mixture was refluxed for 2.5 hours, then cooled to room temperature and quenched with sat. aq. NaHCO3 (25 mE). The organic layer was removed, washed with water (20 mE), washed with brine (15 mE), and concentrated on to silica. The crude product was purified by flash column chromatography using a gradient of 5-10% ethyl acetate in hexanes to yield 21 a as a white solid in61% yield. ?H NMR (500 MHz, CDC13) oe 8.06 (d, J=1 .5 Hz, 1H), 7.90 (dd, J=8.1, 1.7 Hz, 1H), 7.52 (d, J=8.3 Hz, 1H), 7.37 (s, 1H). ECMS does not ionize.

19477-73-7, The synthetic route of 19477-73-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Northeastern University; POLLASTRI, Michael P.; MEHTA, Naimee; DEVINE, William; WOODRING, Jennifer; SWAMINATHAN, Uma; US2015/259331; (2015); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.120973-72-0,2-Benzoylbenzofuran-5-carbaldehyde,as a common compound, the synthetic route is as follows.

General procedure: To a stirred solution of 1 (100 mg, 0.56 mmol) and 4-(dimethylamino)benzaldehyde (2a) (83 mg, 0.56 mmol) in dry 1,4 dioxane was added gradually BF3¡¤OEt2 (0.142 mL, 1.12 mmol) at room temperature. The whole reaction mixture was stirred for 24 h. The reaction mixture was then diluted with ethyl acetate (100 mL) and washed with water (3 x 25 mL) to decompose the BF3¡¤OEt2 complex. The organic solution obtained after extraction was dried over anhyd. Na2SO4, filtered and the solvent was evaporated under reduced pressure. The crude product was purified by silica gel column chromatography using hexane-ethyl acetate (93:7) as a mobile phase to afford 3a. (140 mg, 80%),, 120973-72-0

120973-72-0 2-Benzoylbenzofuran-5-carbaldehyde 2794865, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Narender; Venkateswarlu; Nayak, B. Vishnu; Sarkar; Tetrahedron Letters; vol. 52; 44; (2011); p. 5794 – 5798;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.32703-79-0,5-(tert-Butyl)isobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

4.1.38 2-(3-Bromo-2-methylphenyl)-5-(tert-butyl)isoindoline-1,3-dione (7l) A mixture of 5-(tert-butyl)isobenzofuran-1,3-dione (93 mg, 0.5 mmol), 3-bromo-2-methylaniline (100 mg, 0.5 mmol) in AcOH (2 mL) was stirred at 100 C for 2 h. The reaction mixture was cooled down to room temperature and diluted with water (10 mL), and then the NaHCO3 solution was added. The product was extracted three times with EtOAc (30 mL) and the combined organic layer was dried over Na2SO4. The solvent was removed in vacuo and the residue product was purified on a silica gel column using petroleum ether/EtOAc (4:1, v/v) as eluent to afford 7l (83 mg, 45.2%) as a gray solid. MS (ESI) m/z 372.1 [M+H]+; 1H NMR (400 MHz, DMSO-d6): delta 7.97-7.95 (m, 1H), 8.42 (s, 1H), 7.93-7.91 (d, J = 8.60 Hz, 1H), 7.77-7.75 (d, J = 8.00 Hz, 1H), 7.44-7.43 (d, J = 7.72 Hz, 1H), 7.33-7.29 (t, J = 15.90 Hz, 1H), 2.17 (s, 3H), 1.38 (s, 9H)., 32703-79-0

32703-79-0 5-(tert-Butyl)isobenzofuran-1,3-dione 122930, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Zhao, Xinge; Xin, Minhang; Huang, Wei; Ren, Yanliang; Jin, Qiu; Tang, Feng; Jiang, Hailong; Wang, Yazhou; Yang, Jie; Mo, Shifu; Xiang, Hua; Bioorganic and Medicinal Chemistry; vol. 23; 2; (2015); p. 348 – 364;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

54008-77-4, 2-Bromobenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,54008-77-4

General procedure: In a hot oven-dried Schlenk tube under N2 atmosphere were added Ph3Bi (0.25 mmol, 110 mg, 1.0 equiv), 2-bromobenzofuran (0.825 mmol, 163 mg, 3.3 equiv), Cs2CO3 (0.75 mmol, 244 mg, 3.0 equiv), Pd(OAc)2 (0.025 mmol, 5.6 mg, 0.1 equiv), PPh3 (0.1 mmol, 26 mg, 0.4 equiv), and NMP (3 mL) solvent. The resulting mixture was stirred in preheated oil bath at 90 C for 1 h. After the reaction is over, the mixture was cooled, quenched with dil HCl and extracted with ethyl acetate. The combined organic extract was washed with water, brine, and dried over MgSO4 and concentrated. The crude was subjected to silica gel column chromatography (230-400 mesh) using petroleum ether as the eluent to obtain the pure 2-phenylbenzofuran (2.1) as a white solid (140 mg, 96%). The product was characterized by spectroscopy and in comparison with the literature data.

54008-77-4 2-Bromobenzofuran 2776264, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Rao, Maddali L.N.; Awasthi, Dheeraj K.; Talode, Jalindar B.; Tetrahedron Letters; vol. 53; 21; (2012); p. 2662 – 2666;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

37418-88-5, 4-Hydroxyisobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

In a 20 mL glass vial, a mixture of 3-hydroxyphthalic anhydride (500 mg, 3.05 mmol, 1 equiv), potassium acetate (927 mg, 9.44 mmol, 3.1 equiv) and 3-aminopiperidine-2,6-dionehydrochloride (552 mg, 3.35 mmol, 1.1 equiv) in acetic acid (10.2 mL, 0.3 M) was heated to 90C overnight. The black reaction mixture was cooled to room temperature and diluted to 20 mLwith water, and subsequently cooled on ice for 30 mm. The resulting slurry was transferred to a50 mL Falcon tube, which was centrifuged at 3500 rpm for 5 mm. The supernatant was discardedand the black solid was transferred to a 250 mL RBF with methanol and concentrated in vacuo. The residue was purified by flash column chromatography on silica gel (CH2C12:MeOH (9:1)) to afford the title compound as a white solid (619 mg, 74%). 1H NMR (400 MHz, DMSO-d6) 11.07 (s, 1H), 7.65 (dd,J=8.4, 6.8Hz, 1H), 7.31 (d,J=6.8Hz, 1H), 7.24(d,J=8.4Hz, 1H), 5.06(dd, J= 12.8, 5.4 Hz, 1H), 2.94-2.82 (m, 1H), 2.64-2.43 (m, 2H), 2.08 – 1.97 (m, 1H); MS (ESI)calcd for C13H11N205 [M+H] 275.07, found 275.26., 37418-88-5

The synthetic route of 37418-88-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; DANA-FARBER CANCER INSTITUTE, INC.; BRADNER, James; ROBERTS, Justin; BEHMAN, Nabet; WINTER, Georg; PHILLIPS, Andrews, J.; HEFFERNAN, Timothy, P.; BUCKLEY, Dennis; (617 pag.)WO2018/148440; (2018); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem