Category: benzofuran

569-31-3,569-31-3, 6,7-Dimethoxy-3H-1-isobenzofuranone is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: Isobenzofuran-1(3H)-one (0.4 mmol), KOH (0.4 mmol), PhSiH3 (1.2 mmol), dried THF (2 mL) were charged in a Schlenk tube(15 mL) under N2 atmosphere. The mixture was refluxed for 4 h. After cooling to rt, the reaction was quenched with EtOH(0.5-1 mL). Solvent was removed under reduced pressure and the crude residue was purified by column chromatography on silica gel with petroleum ether-ethyl acetate as the eluent to afford the desired product.

As the paragraph descriping shows that 569-31-3 is playing an increasingly important role.

Reference£º
Article; Liu, Bin; Zhou, Xigeng; Chinese Chemical Letters; vol. 30; 3; (2019); p. 725 – 728;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

52010-22-7, 4-Chlorophthalide is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,52010-22-7

(a) 3-bromo-4-chloroisobenzofuran-1(3H)-one (100) 4-chloroisobenzofuran-1(3H)-one (10 g, 59.32 mmol), (E)-2,2′-(diazene-1,2-diyl)bis(2-methylpropanenitrile) (0.974 g, 5.93 mmol) and 1-bromopyrrolidine-2,5-dione (11.61 g, 65.25 mmol) were dissolved CCl4 (100 mL) and heated at reflux for 2 hours. The reaction was cooled and filtered, the filtrate was evaporated to the desired compound as a yellow gum (14.20 g, 97% yield); 1H NMR (400.132 MHz, CDCl3) delta 7.32 (1H, s), 7.61 (1H, t), 7.73 (1H, d), 7.88 (1H, d); m/z (LC-MS, ESI+), RT=2.28 (M+H not detected).

52010-22-7 4-Chlorophthalide 3040300, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; MENEAR, Keith Allan; Javaid, Muhammad Hashim; Gomez, Sylvie; Hummersone, Marc Geoffrey; Lence, Carlos Fenandez; Martin, Niall Morrison Barr; Rudge, David Alan; Roberts, Craig Anthony; Blades, Kevin; US2009/192156; (2009); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

57319-65-0, 6-Aminoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,57319-65-0

Example 16 3-(6-Amino-3H-isobenzofuran-1-ylidene)-5-chloro-1,3-dihydro-indol-2-one To a solution of 5-chlorooxindole (0.629 g, 3.78 mmol) in 10.0 mL monoglyme was added 7.51 mL sodium hexamethyldisilazane (1.0 M in THF) over 3 min. After stirring at room temperature for 8 min, a slurry of 6-aminophthalide (0.561 g, 3.78 mmol) in 4.0 mL of monoglyme was added in one portion. The mixture was stirred for 40 min and then quenched into 100 mL of 4% aqueous HCl solution. The yellow solid was filtered and then partitioned between EtOAc and saturated NaHCO3 (heated to dissolve the solid). The organic phase was washed with H2O, brine and then dried with Na2SO4. The solvent was removed in vacuo and the residue was triturated with MeOH to give the title compound (439 mg, 39%) as a yellow solid.

The synthetic route of 57319-65-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Allergan Sales, LLC; US6541504; (2003); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7169-34-8,Benzofuran-3(2H)-one,as a common compound, the synthetic route is as follows.,7169-34-8

General procedure: To a solution of benzofuran-3(2H)-one derivative (2a,b,d, 1.2 mmol) in ethanol (5 ml) in the presence of corresponding benzaldehyde (1.3 mmol), aqueous solution of 5% HCl (1 ml) was added and the mixture was refluxed for 6-9 hours (controlled by TLC). After cooling in an ice bath, the solution was neutralized by adding a cold solution of 2% KOH to reach the pH of 5-6. The resulting yellow precipitate was filtered and recrystallized from diluted methanol to give the desired products.

As the paragraph descriping shows that 7169-34-8 is playing an increasingly important role.

Reference£º
Article; Roshanzamir, Khashayar; Kashani-Amin, Elaheh; Ebrahim-Habibi, Azadeh; Navidpour, Latifeh; Letters in drug design and discovery; vol. 16; 3; (2019); p. 333 – 340;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.206347-30-0,7-Bromo-2,3-dihydrobenzofuran,as a common compound, the synthetic route is as follows.

[1289] A first intermediate compound 4-(2,3-Dihydro-benzofuran-7-yl)-piperazine-1-carboxylic acid tert-butyl ester, was produced as follows: A solution of bis-(dibenzylideneacetone)palladium(0) (4.92 g, 0.16 mol) and toluene (2500 ml) was degassed with nitrogen for 15 minutes. (Note: Degassing was continued during each addition. Time between additions was 15 minutes.) Then added was tri-o-tolylphosphine (4.92 g, 0.16 mol) then sodium t-butoxide (53.8 g, 0.56 mol) then Boc-piperazine (86.8 g, 0.47 mol) then a solution of 7-bromo-2,3-dihydro-benzofuran (79.6 g, 0.40 mol, prepared according to Tetrahedron Lett. 1998, 39, 2219) in toluene (100 ml). The reaction mixture was stirred at reflux for 16 h. By TLC, all starting material had been consumed. The cooled reaction mixture was filtered over a pad of Celite. The filtrate was concentrated under reduced pressure and the residue was triturated with ethyl acetate in heptane (50%). The insoluble material was filtered off and that filtrate was concentrated under reduced pressure. The crude residue was purified by flash column chromatography using ethyl acetate in heptane (50%) to give 46.4 g (38% yield) of the first intermediate compound as a tan solid., 206347-30-0

As the paragraph descriping shows that 206347-30-0 is playing an increasingly important role.

Reference£º
Patent; Clark, Jerry D.; Davis, Jamie M.; Favor, David; Fay, Lorraine K.; Franklin, Lloyd; Henegar, Kevin E.; Johnson, Douglas S.; Nichelson, Brian J.; Ou, Ligong; Repine, Joseph Thomas; Walters, Michael A.; White, Andrew David; Zhu, Zhijian; US2005/43309; (2005); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13391-28-1,5-Methoxybenzofuran,as a common compound, the synthetic route is as follows.

Step 5: BBr3 (2.6 mL, 13.5 mmol) was added dropwise to S22-4 (2.0 g, 13.Smmol) in DCM (20mL) at -60 C under N2. The solution was stirred at 0C for 2h. The mixture was poured into iceand adjusted the pH to 1213. The inorganic phase was extracted with DCM. The combined organic layers were washed with brine, dried over anhydrous sodium sulfate, filtrated and concentrated to provide a residue, which was purified by column chromatography to afford S22-5.

13391-28-1, The synthetic route of 13391-28-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; LIANG, Gui-Bai; ZHOU, Changyou; WANG, Haisheng; HUO, Xianghong; WO2015/95261; (2015); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

24410-59-1, 5-Fluorobenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of substrate 1 (1.0 mmol, 1 equiv), NaSO2CF2Br (23.4 mg, 2.0 mmol, 2.0 equiv) in CH2Cl2 (7.0 mL) and CH3CN (3.5 mL) at room temperature was slowly added TBHP (5.0-6.0 M in decane, 1.4 mL, 7 equiv). The reaction was then stirred for 16 h. After the reaction was complete, the reaction mixture was concentrated under vacuum and the crude product was purified by column chromatography on silica gel to give the product.

24410-59-1, As the paragraph descriping shows that 24410-59-1 is playing an increasingly important role.

Reference£º
Article; Zhang, Jin; Xu, Xiu-Hua; Qing, Feng-Ling; Tetrahedron Letters; vol. 57; 22; (2016); p. 2462 – 2464;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

54008-77-4,54008-77-4, 2-Bromobenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: In a hot oven-dried Schlenk tube under N2 atmosphere were added Ph3Bi (0.25 mmol, 110 mg, 1.0 equiv), 2-bromobenzofuran (0.825 mmol, 163 mg, 3.3 equiv), Cs2CO3 (0.75 mmol, 244 mg, 3.0 equiv), Pd(OAc)2 (0.025 mmol, 5.6 mg, 0.1 equiv), PPh3 (0.1 mmol, 26 mg, 0.4 equiv), and NMP (3 mL) solvent. The resulting mixture was stirred in preheated oil bath at 90 C for 1 h. After the reaction is over, the mixture was cooled, quenched with dil HCl and extracted with ethyl acetate. The combined organic extract was washed with water, brine, and dried over MgSO4 and concentrated. The crude was subjected to silica gel column chromatography (230-400 mesh) using petroleum ether as the eluent to obtain the pure 2-phenylbenzofuran (2.1) as a white solid (140 mg, 96%). The product was characterized by spectroscopy and in comparison with the literature data.

The synthetic route of 54008-77-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Rao, Maddali L.N.; Awasthi, Dheeraj K.; Talode, Jalindar B.; Tetrahedron Letters; vol. 53; 21; (2012); p. 2662 – 2666;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.28418-88-4,4-Iodoisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

SYNTHESIS EXAMPLE 7-1;To a solution of 3-iodophthalic anhydride (32.5 g) in dimethylformamide (300 mL), a solution of (2S)-I- (methylthio)propan-2-amine (15.0 g) in dimethylformamide (50 mL) was added dropwise at -100C for 3 hours, and the mixture was stirred at -100C for additional 3 hours. After addition of 40% sodium hydroxide aqueous solution (15 g), the solvent was distilled off under reduced pressure, and the crude product was dissolved in water (500 mL) and washed with diisopropyl ether. The water phase was separated, adjusted to pH 1 with concentrated hydrochloric acid and extracted with diisopropyl ether. The organic phase was washed with saturated brine and dried over anhydrous sodium sulfate. The solvent was distilled off, and the resulting crude crystal was washed with a small amount of diisopropyl ether and air-dried to obtain 3-iodo-2-{[(lS)-l-methyl-2-(methylthio)ethyl]- carbamoyl} benzoic acid (32.2 g).Melting point: 132 – 134C

28418-88-4, The synthetic route of 28418-88-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BAYER CROPSCIENCE AG; WADA, Katsuaki; YONETA, Yasushi; GOMIBUCHI, Takuya; MURATA, Tetsuya; KUDO, Sachio; KISHIKAWA, Hidetoshi; SHIBUYA, Katsuhiko; SHIMOJA, Eiichi; EMOTO, Akira; SATO, Yoshitaka; FISCHER, Ruediger; FUNKE, Christian; ARNOLD, Christian; FRANKEN, Eva-Maria; MALSAM, Olga; SANWALD, Erich; GOeRGENS, Ulrich; ATAKA, Masashi; RECKMANN, Udo; PAULITZ, Christian; KAPFERER, Tobias; WO2010/12442; (2010); A2;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

4265-16-1, Benzo[b]furan-2-carboxaldehyde is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Method B Benzofuran-2-carboxaldehyde (10.0 g, 68 mmol) was dissolved in methanol (70 mL) and cooled to 5 C. Sodium borohydride (2.58 g, 68 mmol) was charged portionwise at 5 C. The batch was aged at 5 C. for 40 minutes and allowed to warm to room temperature (22 C.). The reaction was judged complete by tlc (4:1 hexanes/EtOAc) and the reaction mixture was cooled to 5 C. DI water (20 mL) was charged and the solution was concentrated in vacuo. EtOAc (80 mL) was charged and the solution was washed with DI water (2*20 mL). The EtOAc layer was concentrated in vacuo to provide benzofuran-2-carbinol as an oil.

4265-16-1, The synthetic route of 4265-16-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Merck & Co., Inc.; US6071916; (2000); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem