Heterocyclic Building Block-benzofuran

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.652-39-1,4-Fluoroisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

652-39-1, A solution of 4-fluoroisobenzofuran-1,3-dione (200 mg, 1.20 mmol, 1 equiv) in AcOH (4.0mL, 0.3 M)was added 2,6-dioxopiperidin-3-amine hydrochloride (218 mg, 1.32 mmol, 1.1 equiv)and potassium acetate (366 mg, 3.73 mmol, 3.1 equiv). The reaction mixture was heated to 90 C overnight, whereupon it was diluted with water to 20 mL and cooled on ice for 30 mm. The resulting slurry was filtered, and the black solid was purified by flash column chromatography on silica gel (2% MeOH in CH2C12, Rf = 0.3) to afford the title compound as a white solid (288 mg,86%). 1H NMR (500 MHz, DMSO-d6) 11.15 (s, 1H), 7.96 (ddd,J= 8.3, 7.3, 4.5 Hz, 1H), 7.82-7.71 (m, 2H), 5.17(dd,J= 13.0, 5.4 Hz, 1H), 2.90(ddd,J= 17.1, 13.9, 5.4 Hz, 1H), 2.65 -2.47 (m, 2H), 2.10-2.04 (m, 1H), MS (ESI) cald for C13H10FN2O4 [M+H] 277.06, found 277.25.

652-39-1 4-Fluoroisobenzofuran-1,3-dione 69551, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; DANA-FARBER CANCER INSTITUTE, INC.; BRADNER, James; ROBERTS, Justin; BEHMAN, Nabet; WINTER, Georg; PHILLIPS, Andrews, J.; HEFFERNAN, Timothy, P.; BUCKLEY, Dennis; (617 pag.)WO2018/148440; (2018); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

19477-73-7, 6-Bromoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To 2 dram, stir-bar equipped vials, were added the aryl bromides (1.0 equiv). A stock solution of Ir[dF(CF3)ppy]2(dtbbpy)PF6 (1.0 mol%) and carboxylic acid 5 (1.1 equiv) in DMF (0.15 M with respect to carboxylic acid 5) was prepared, and to this stock solution was added TMG (1.1 equiv). The resulting stock solution was kept under a blanket of nitrogen. A separate solution of [Ni(dtbbpy)(H2O)4]Cl2 (10 mol%) in DMF (0.04 M) was prepared. The stock solution of Ir cat./acid/TMG was added to the aryl bromide monomers, followed by the Ni stock solution. The reaction mixtures were purged by blowing nitrogen over the top, sealed, and irradiated with blue LED (34 W LED Kessil lamps) for 24 h at room temperature. The reaction mixtures were diluted with EtOAc (3 mL) and H2O (4 mL). The organic layer was separated and concentrated under reduced pressure. The resulting residue was purified by silica gel chromatography with a solvent gradient from 0%EtOAc/hexanes to 100% EtOAc/hexanes to deliver the title compound.

19477-73-7, As the paragraph descriping shows that 19477-73-7 is playing an increasingly important role.

Reference£º
Article; Suen, Linda M.; Wang, Cheng; Hunter, David N.; Mitchell, Helen J.; Converso, Antonella; Elmarrouni, Abdellatif; Synthesis; vol. 50; 16; (2018); p. 3177 – 3186;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.81742-10-1,3,6-Dichlorotrimellitic Anhydride,as a common compound, the synthetic route is as follows.,81742-10-1

General procedure: A mixture of compound 14 (1 g, 6.7 mmol) and 3,6-dichlorotrimellitic anhydride (875 mg, 3.35 mmol) in 5 mL polyphosphoric acid is heated to 180 C. overnight. After cooling to room temperature, the mixture is poured into ice/water, and stirred for 30 min. The resulting precipitate is filtered, washed with water, and dried under vacuum. The crude product is purified on silica gel using CH2Cl2/MeOH. Yield: 438 mg (25%).

81742-10-1 3,6-Dichlorotrimellitic Anhydride 15883776, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Ying, Laiqiang; (22 pag.)US10513610; (2019); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.23145-07-5,5-Bromobenzofuran,as a common compound, the synthetic route is as follows.

To a solution of the product from Step B (2 g) in ether (20 ml) at -78 C. was added t-BuLi dropwise. After stirring for 20 min, DMF (950 mg) was added dropwise and the mixture was stirred at ?25 C. for 3 hrs and then warmed to room temperature overnight. Saturated ammonium chloride was added and the solution was extracted with ether. The ether layer was washed with brine, dried with MgSO4, filtered and concentrated in vacuo to give 980 mg of crude product (67percent)., 23145-07-5

23145-07-5 5-Bromobenzofuran 90015, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Schering Corporation; US2004/106794; (2004); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4687-25-6,Benzofuran-3-carbaldehyde,as a common compound, the synthetic route is as follows.

General procedure: Titanium tetrachloride (1.90 g, 10 mmol) was slowly added to100 mL of anhydrous THF at 0 ¡ãC, followed by addition of 5 mmol of the aldehyde (1) and stirred for 10 min, then ethyl 2-(3-bromopyridin-2-yl)acetate (2) (1.47 g, 6 mmol) was added. Subsequently, a solution of pyridine (3.16 g, 40 mmol) in 25 mL of anhydrous THF was added dropwise during a period of 30-60 min at 0 ¡ãC. The reaction mixture was then stirred for 1 h at room temperature and refluxed for 24 h. After that the mixture was poured on to crashed ice and extracted with ethyl acetate (4 30 mL). The combined extracts were successively washed with brine, saturated sodium hydrogen carbonate and brine, and then dried over anhydrous MgSO4. The organic phase was filtrated and the solvent was removed in vacuo, the residue was purified by column chromatography (silica gel) using PE/EA (5:1) / DCM/MeOH (50:1) to provide 3.

4687-25-6, As the paragraph descriping shows that 4687-25-6 is playing an increasingly important role.

Reference£º
Article; Li, Bo; Yue, Zhi-Zhou; Feng, Jian-Ming; He, Qian; Miao, Ze-Hong; Yang, Chun-Hao; European Journal of Medicinal Chemistry; vol. 66; (2013); p. 531 – 539;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

7169-34-8, Benzofuran-3(2H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,7169-34-8

General procedure: To a solution of benzofuran-3(2H)-one (134mg, 1mmol) in dry methanol (20mL) at room temperature was added the appropriate aldehyde (1.2mmol) and Al2O3 (1mmol). The mixture was refluxed, under N2, for 48h. After, the solvent was removed and the solid residue was dissolved in CH2Cl2. The organic layer was washed with water, dried with anhydrous Na2SO4 and concentrated under reduced pressure to give the crude product.

The synthetic route of 7169-34-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Carrasco, Marta P.; Newton, Ana S.; Goncalves, Lidia; Gois, Ana; Machado, Marta; Gut, Jiri; Nogueira, Fatima; Haenscheid, Thomas; Guedes, Rita C.; Dos Santos, Daniel J.V.A.; Rosenthal, Philip J.; Moreira, Rui; European Journal of Medicinal Chemistry; vol. 80; (2014); p. 523 – 534;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

496-16-2, 2,3-Dihydrobenzo[b]furan is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

(1) 4-(2,3-dihydro-1-benzofuran-5-yl)-4-oxobutanoic acid To a suspension of 2,3-dihydro-1-benzofuran (5.2 g) and succinic anhydride (5.2 g) in dichloromethane (30 mL) was gradually added aluminum chloride (14.4 g) under ice-cooling, and the mixture was heated with stirring at 50¡ãC for 0.5 hr. The reaction mixture was cooled, and poured into concentrated hydrochloric acid (100 mL)-ice. The mixture was stirred for 1 hr, and extracted with ethyl acetate. The obtained organic layer was washed with water, dried over anhydrous magnesium sulfate, and concentrated under reduced pressure, and the obtained residue was recrystallized from ethyl acetate to give 4-(2,3-dihydro-1-benzofuran-5-yl)-4-oxobutanoic acid as crystals (3.8 g). 1H-NMR (CDCl3) delta: 2.80 (2H, t, J=6.0 Hz), 3.26(4H, m), 4.67(2H, t, J=9.0 Hz), 6. 82 (1H, d, J=8.4 Hz), 7.85(2H, m)

496-16-2, 496-16-2 2,3-Dihydrobenzo[b]furan 10329, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Takeda Pharmaceutical Company Limited; EP1845081; (2007); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

13391-28-1, 5-Methoxybenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of substrate 1 (1.0 mmol, 1 equiv), NaSO2CF2Br (23.4 mg, 2.0 mmol, 2.0 equiv) in CH2Cl2 (7.0 mL) and CH3CN (3.5 mL) at room temperature was slowly added TBHP (5.0-6.0 M in decane, 1.4 mL, 7 equiv). The reaction was then stirred for 16 h. After the reaction was complete, the reaction mixture was concentrated under vacuum and the crude product was purified by column chromatography on silica gel to give the product.

13391-28-1, 13391-28-1 5-Methoxybenzofuran 25943, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Zhang, Jin; Xu, Xiu-Hua; Qing, Feng-Ling; Tetrahedron Letters; vol. 57; 22; (2016); p. 2462 – 2464;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.641-70-3,3-Nitrophthalic anhydride,as a common compound, the synthetic route is as follows.

641-70-3, Synthesis of 2-[4-(2-Chloroethoxy)benzoyl]-4-nitroindan-1,3-dione: To a suspension of 1-[4-(2-chloroethoxy)phenyl]-4,4,4-trifluorobutane-1,3-dione (59.3 g, 201 mmol) and 3-nitrophthalic anhydride (38.9 g, 201 mmol) at 0 C. in acetic anhydride (114 mL) was added triethylamine (41 g, 403 mmol). The mixture slowly turned deep red and became homogeneous. The reaction was allowed to warm to room temp. overnight. The reaction mixture was cooled to 0 C. and 2N HCl (600 mL) was added slowly. The mixture was vigorously stirred for 45 min. at room temp. until a brown granular ppt formed. The brown solid was collected by filtration, resuspended in H2O (250 mL) and stirred for 20 min. The brown solid was filtered and dried under vacuum. The crude reaction product was suspended in EtOH (500 mL) and then heated to boiling. The solution slowly turned deep red and the solid became bright yellow. The suspension was allowed to cool to room temp. The product was collected by filtration and dried under vacuum to give the triketone as a bright yellow solid (45 g, 60% yield).

641-70-3 3-Nitrophthalic anhydride 21631, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Bockovich, Nicholas; Kluge, Arthur; Ram, Siya; Wang, Zhonghuo; Oalmann, Chris; Murthi, Krishna K.; US2003/162797; (2003); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

42933-43-7, 2,3-Dihydrobenzofuran-5-amine is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 3: Preparation of 5-acetylamino-2,3-dihydrobenzofuran [Show Image] The product (5.2 g, 38.5 mmol) obtained in Step 2 was dissolved in AcOH (20 mL) and Ac2O (5 mL), heated to 60¡ãC, reacted for 12 h, and concentrated to obtain a crude product (6 g, 88.0percent).

42933-43-7, The synthetic route of 42933-43-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Xuanzhu Pharma Co., Ltd.; EP2532665; (2012); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem