Tag: M.W:200-300

19477-73-7, 6-Bromoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

6-Bromo-3H-isobenzofuran-1-one (5.0 g, 23.47 mmol) was weighed and added to a three-neck bottle.Measure tetrahydrofuran: methanol: water (2:1:1, 80 mL), add to a three-neck bottle, stir for 10 minutes.After dissolution, lithium hydroxide (3.45 g, 70.42 mmol) was added and stirred at room temperature for 16 hours.After the reaction of the raw materials was monitored by thin layer chromatography, the reaction mixture was concentrated, and water (100 mL) was added.The pH was adjusted to 3 with 2N hydrochloric acid and extracted three times with 100 mL of ethyl acetate.The organic phase is then washed with water and the organic phase is washed with saturated sodium chloride.Dried over anhydrous sodium sulfate, filtered and concentrated.This gave 3.3 g (91%) of a white solid.

19477-73-7, The synthetic route of 19477-73-7 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Shanghai Yilishe Biological Co., Ltd.; Zhang Lihai; Gao Zhichao; Huang Ximing; Liu Hui; Hu Min; Jiang Yan; (72 pag.)CN108250058; (2018); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.6940-49-4,3-Bromophthalide,as a common compound, the synthetic route is as follows.

General procedure: Amine (1.05 Equiv) was added to Isatoic anhydride (1.0 Equiv) in water (4.0mL) and PEG400 (1.0mL) at RT and stirred for 1-2 hr. Upon completion of SM by TLC, added 3-bromoisobenzofuran-1(3H)-one (1.1 Equiv) and warm the reaction mixture to 90-95 C and maintained for 10-14 h. After completion of the reaction, cool the reaction mass up to 25-30 C and product was filtered and further purified via column chromatography through silica gel stationary phase and Ethyl acetate & Heptane mixture as eluent., 6940-49-4

As the paragraph descriping shows that 6940-49-4 is playing an increasingly important role.

Reference£º
Article; Madhubabu; Shankar; Reddy, G. Rajeshwar; Rao, T. Srinivasa; Basaveswara Rao, Mandava V.; Akula, Raghunadh; Tetrahedron Letters; vol. 57; 46; (2016); p. 5033 – 5037;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

64169-34-2, 5-Bromoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

[0338j Lithium hydroxide (3.45 g, 70.42 mmol, 3.0 equiv) was added at room temperature over several minutes to a solution of 5-bromophthalide (5.0 g, 23.47 mmol, 1.0 equiv) in a 2:1:1 solution of THF/MeOH/ H20 (80 mL) and the reaction mixture was stirred at room temperature for 16 h. After removal of the solvent, the residue was diluted with water (100 mL), adjusted to pH = 3 with HC1 (2 N) and extracted with EtOAc (100 mL x 3). The organic layers were collected, dried (Na2SO4), filtered, and concentrated via rotary evaporator to give title product (3.47 g, yield: 94%) as a white solid, which was used in the next step withoutfurther purification. ESI-MS (M+H) : 231.1. ?H NMR (400 MHz, CD3OD) (5: 7.88-7.86 (m, 2H), 7.45 (dd, J= 8.4, 2.0 Hz, 1H), 4.90 (s, 2H).

64169-34-2, The synthetic route of 64169-34-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; BIOGEN IDEC MA INC.; SUNESIS PHARMACEUTICALS, INC.; HOPKINS, Brian, T.; MA, Bin; CHAN, Timothy, Raymond; SUN, Lihong; ZHANG, Lei; KUMARAVEL, Gnanasambandam; LYSSIKATOS, Joseph, P.; KOCH, Kevin; MIAO, Hua; WO2015/89337; (2015); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

32703-79-0, 5-(tert-Butyl)isobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of 4-tert-butylphthalic anhydride (4.39 g, 21.5 mmol) in acetic acid (40 mL), 3-bromo-2-methylaniline(2.65 mL, 21.5 mmol) was added and stirred at 100 C for 1 h. The reaction mixture was concentrated under reducedpressure, and diluted with ethyl acetate (300 mL), washed with water (100 mL), saturated sodium hydrogen carbonatesolution (100 mL) and brine (100 mL), dried over sodium sulfate, filtered and concentrated. The crude material was suspended in hexane, then the precipitate was collected by filtration, washed with hexane then dried to afford 2-(3-bromo-2-methylphenyl)-5-(tert-butyl)isoindoline-1,3-di one (7.0 g). 1H NMR (400 MHz, CDCl3) delta 8.00 (dd, J = 1.7, 0.7 Hz, 1H), 7.93 – 7.77 (m, 2H), 7.67 (dd, J = 7.6, 1.8 Hz, 1H),7.24 – 7.12 (m, 2H), 2.27 (s, 3H), 1.42 (s, 9H)., 32703-79-0

As the paragraph descriping shows that 32703-79-0 is playing an increasingly important role.

Reference£º
Patent; Carna Biosciences, Inc.; KAWAHATA, Wataru; ASAMI, Tokiko; SAWA, Masaaki; ASAMITSU, Yuko; IRIE, Takayuki; MIYAKE, Takahiro; KIYOI, Takao; EP2824099; (2015); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.64169-34-2,5-Bromoisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

5-Bromophthalide (50g, 235 mmol), potassium vinyl trifluoroborate (62.9 g, 469 mmol), and PdCl2(dppf)-CH2Cl2 Adduct (9.58 g, 11.7 mmol) were added to ethanol (500 mL) then TEA (65.4 mL, 469 mmol) was added. The reaction mixture was degassed then heated at reflux for 8 h. The reaction was worked up by diluting with ethyl acetate and washing with brine twice. The organic layer was dried and evaporated to dryness. The crude product was purified by MPLC (silica, 600g column) with 25% EtOAc/hexane (3 L) then with 30% EtOAc/Hexane (2 L) to yield the title compound., 64169-34-2

As the paragraph descriping shows that 64169-34-2 is playing an increasingly important role.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; PIO, Barbara; PASTERNAK, Alexander; SHAHRIPOUR, Aurash; TANG, Haifeng; WALSH, Shawn; WO2013/90271; (2013); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.6940-49-4,3-Bromophthalide,as a common compound, the synthetic route is as follows.

General procedure: Amine (1.05 Equiv) was added to Isatoic anhydride (1.0 Equiv) in water (4.0mL) and PEG400 (1.0mL) at RT and stirred for 1-2 hr. Upon completion of SM by TLC, added 3-bromoisobenzofuran-1(3H)-one (1.1 Equiv) and warm the reaction mixture to 90-95 C and maintained for 10-14 h. After completion of the reaction, cool the reaction mass up to 25-30 C and product was filtered and further purified via column chromatography through silica gel stationary phase and Ethyl acetate & Heptane mixture as eluent., 6940-49-4

6940-49-4 3-Bromophthalide 96218, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Madhubabu; Shankar; Reddy, G. Rajeshwar; Rao, T. Srinivasa; Basaveswara Rao, Mandava V.; Akula, Raghunadh; Tetrahedron Letters; vol. 57; 46; (2016); p. 5033 – 5037;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

81742-10-1, 3,6-Dichlorotrimellitic Anhydride is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Dibenzofuran-1,3-diol (prepared according to Carvalho, C. F. et al. (Supra)) (200 mg, 1 mmol), 2-fluoronaphthalene-1,3-diol 34 (178 mg, 1 mmol, AB part number 361828) and anhydrous 2,5-dichlorotrimellitic acid (260 mg, 1 mmol, AB part number 361892) were mixed in methanesulfonic acid (10 mL). Then, the mixture was stirred at 130 to 135 C. for 2 hours. The reaction mixture was cooled and mixed with ice water (100 mL). The precipitated dye was extracted with ethyl acetate (100 mL). The organic layer was washed with water (50 mL ¡Á 2) and washed with brine (50 mL ¡Á 1). After drying over sodium sulfate, the mixture was filtered, the solvent was removed, and the crude pigment was obtained as an isomeric mixture. These isomers were separated by thin layer chromatographic separation and 80 mg (13%) of a dye was obtained., 81742-10-1

As the paragraph descriping shows that 81742-10-1 is playing an increasingly important role.

Reference£º
Patent; APPLIED BIOSYSTEMS Ltd. LIABILITY COMPANY; BENSON, SCOTT CONRAD; MENCHEN, STEVEN MICHAEL; THEISEN, PETER DAVID; UPADHYA, KRISHNA GAJANAN; HAUSER, JOAN DALE; (37 pag.)JP2015/57478; (2015); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.81742-10-1,3,6-Dichlorotrimellitic Anhydride,as a common compound, the synthetic route is as follows.,81742-10-1

General procedure: A mixture of compound 14 (1 g, 6.7 mmol) and 3,6-dichlorotrimellitic anhydride (875 mg, 3.35 mmol) in 5 mL polyphosphoric acid is heated to 180 C. overnight. After cooling to room temperature, the mixture is poured into ice/water, and stirred for 30 min. The resulting precipitate is filtered, washed with water, and dried under vacuum. The crude product is purified on silica gel using CH2Cl2/MeOH. Yield: 438 mg (25%).

81742-10-1 3,6-Dichlorotrimellitic Anhydride 15883776, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Ying, Laiqiang; (22 pag.)US10513610; (2019); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

19477-73-7, 6-Bromoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To 2 dram, stir-bar equipped vials, were added the aryl bromides (1.0 equiv). A stock solution of Ir[dF(CF3)ppy]2(dtbbpy)PF6 (1.0 mol%) and carboxylic acid 5 (1.1 equiv) in DMF (0.15 M with respect to carboxylic acid 5) was prepared, and to this stock solution was added TMG (1.1 equiv). The resulting stock solution was kept under a blanket of nitrogen. A separate solution of [Ni(dtbbpy)(H2O)4]Cl2 (10 mol%) in DMF (0.04 M) was prepared. The stock solution of Ir cat./acid/TMG was added to the aryl bromide monomers, followed by the Ni stock solution. The reaction mixtures were purged by blowing nitrogen over the top, sealed, and irradiated with blue LED (34 W LED Kessil lamps) for 24 h at room temperature. The reaction mixtures were diluted with EtOAc (3 mL) and H2O (4 mL). The organic layer was separated and concentrated under reduced pressure. The resulting residue was purified by silica gel chromatography with a solvent gradient from 0%EtOAc/hexanes to 100% EtOAc/hexanes to deliver the title compound.

19477-73-7, As the paragraph descriping shows that 19477-73-7 is playing an increasingly important role.

Reference£º
Article; Suen, Linda M.; Wang, Cheng; Hunter, David N.; Mitchell, Helen J.; Converso, Antonella; Elmarrouni, Abdellatif; Synthesis; vol. 50; 16; (2018); p. 3177 – 3186;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

32703-79-0, 5-(tert-Butyl)isobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Zinc phthalocyanine (6) (40 mg, 0.05 mmol) and pyridine.HCl (1 g, 8.7 mmol) were dissolved in 5 mL of pyridine and the mixture was refluxed under N2 for 16 h. After the reaction mixture was cooled to room temperature, 10 mL of water was added and the product was precipitated. The precipitate was washed first with water and then with methanol. After drying in vacuo the product was puried by column chromatography on silica gel by using ethyl acetate/hexane (1/3) eluent. The product was obtained as a dark blue solid. Yield 74%, FTIR ( , cm1) : 3283, 3071, 2956, 2907, 2866, 1617, 1485, 1258, 1089, 1000, 827, 741.1H NMR (500 MHz, CDCl3) : , ppm 9.14{8.62 (8H, m, Pc-H), 8.17{8.04 (4H, m, Pc-H), 1.94{1.89 (36H, m,C-(CH3)3) , {2.67{ {3.46 (2H, m, N-H), MS: m/z 747.079 [M+H]+., 32703-79-0

32703-79-0 5-(tert-Butyl)isobenzofuran-1,3-dione 122930, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Atsay, Arma?an; Guel, Ahmet; Burkut Kocak, Makbule; Turkish Journal of Chemistry; vol. 40; 1; (2016); p. 163 – 173;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem