Simple exploration of 7169-34-8

As the paragraph descriping shows that 7169-34-8 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.7169-34-8,Benzofuran-3(2H)-one,as a common compound, the synthetic route is as follows.,7169-34-8

General procedure: To a solution of benzofuran-3(2H)-one derivative (2a,b,d, 1.2 mmol) in ethanol (5 ml) in the presence of corresponding benzaldehyde (1.3 mmol), aqueous solution of 5% HCl (1 ml) was added and the mixture was refluxed for 6-9 hours (controlled by TLC). After cooling in an ice bath, the solution was neutralized by adding a cold solution of 2% KOH to reach the pH of 5-6. The resulting yellow precipitate was filtered and recrystallized from diluted methanol to give the desired products.

As the paragraph descriping shows that 7169-34-8 is playing an increasingly important role.

Reference£º
Article; Roshanzamir, Khashayar; Kashani-Amin, Elaheh; Ebrahim-Habibi, Azadeh; Navidpour, Latifeh; Letters in drug design and discovery; vol. 16; 3; (2019); p. 333 – 340;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

New learning discoveries about 206347-30-0

As the paragraph descriping shows that 206347-30-0 is playing an increasingly important role.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.206347-30-0,7-Bromo-2,3-dihydrobenzofuran,as a common compound, the synthetic route is as follows.

[1289] A first intermediate compound 4-(2,3-Dihydro-benzofuran-7-yl)-piperazine-1-carboxylic acid tert-butyl ester, was produced as follows: A solution of bis-(dibenzylideneacetone)palladium(0) (4.92 g, 0.16 mol) and toluene (2500 ml) was degassed with nitrogen for 15 minutes. (Note: Degassing was continued during each addition. Time between additions was 15 minutes.) Then added was tri-o-tolylphosphine (4.92 g, 0.16 mol) then sodium t-butoxide (53.8 g, 0.56 mol) then Boc-piperazine (86.8 g, 0.47 mol) then a solution of 7-bromo-2,3-dihydro-benzofuran (79.6 g, 0.40 mol, prepared according to Tetrahedron Lett. 1998, 39, 2219) in toluene (100 ml). The reaction mixture was stirred at reflux for 16 h. By TLC, all starting material had been consumed. The cooled reaction mixture was filtered over a pad of Celite. The filtrate was concentrated under reduced pressure and the residue was triturated with ethyl acetate in heptane (50%). The insoluble material was filtered off and that filtrate was concentrated under reduced pressure. The crude residue was purified by flash column chromatography using ethyl acetate in heptane (50%) to give 46.4 g (38% yield) of the first intermediate compound as a tan solid., 206347-30-0

As the paragraph descriping shows that 206347-30-0 is playing an increasingly important role.

Reference£º
Patent; Clark, Jerry D.; Davis, Jamie M.; Favor, David; Fay, Lorraine K.; Franklin, Lloyd; Henegar, Kevin E.; Johnson, Douglas S.; Nichelson, Brian J.; Ou, Ligong; Repine, Joseph Thomas; Walters, Michael A.; White, Andrew David; Zhu, Zhijian; US2005/43309; (2005); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Some tips on 13391-28-1

13391-28-1, The synthetic route of 13391-28-1 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.13391-28-1,5-Methoxybenzofuran,as a common compound, the synthetic route is as follows.

Step 5: BBr3 (2.6 mL, 13.5 mmol) was added dropwise to S22-4 (2.0 g, 13.Smmol) in DCM (20mL) at -60 C under N2. The solution was stirred at 0C for 2h. The mixture was poured into iceand adjusted the pH to 1213. The inorganic phase was extracted with DCM. The combined organic layers were washed with brine, dried over anhydrous sodium sulfate, filtrated and concentrated to provide a residue, which was purified by column chromatography to afford S22-5.

13391-28-1, The synthetic route of 13391-28-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MERCK SHARP & DOHME CORP.; LIANG, Gui-Bai; ZHOU, Changyou; WANG, Haisheng; HUO, Xianghong; WO2015/95261; (2015); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Downstream synthetic route of 24410-59-1

24410-59-1, As the paragraph descriping shows that 24410-59-1 is playing an increasingly important role.

24410-59-1, 5-Fluorobenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of substrate 1 (1.0 mmol, 1 equiv), NaSO2CF2Br (23.4 mg, 2.0 mmol, 2.0 equiv) in CH2Cl2 (7.0 mL) and CH3CN (3.5 mL) at room temperature was slowly added TBHP (5.0-6.0 M in decane, 1.4 mL, 7 equiv). The reaction was then stirred for 16 h. After the reaction was complete, the reaction mixture was concentrated under vacuum and the crude product was purified by column chromatography on silica gel to give the product.

24410-59-1, As the paragraph descriping shows that 24410-59-1 is playing an increasingly important role.

Reference£º
Article; Zhang, Jin; Xu, Xiu-Hua; Qing, Feng-Ling; Tetrahedron Letters; vol. 57; 22; (2016); p. 2462 – 2464;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Simple exploration of 54008-77-4

The synthetic route of 54008-77-4 has been constantly updated, and we look forward to future research findings.

54008-77-4,54008-77-4, 2-Bromobenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: In a hot oven-dried Schlenk tube under N2 atmosphere were added Ph3Bi (0.25 mmol, 110 mg, 1.0 equiv), 2-bromobenzofuran (0.825 mmol, 163 mg, 3.3 equiv), Cs2CO3 (0.75 mmol, 244 mg, 3.0 equiv), Pd(OAc)2 (0.025 mmol, 5.6 mg, 0.1 equiv), PPh3 (0.1 mmol, 26 mg, 0.4 equiv), and NMP (3 mL) solvent. The resulting mixture was stirred in preheated oil bath at 90 C for 1 h. After the reaction is over, the mixture was cooled, quenched with dil HCl and extracted with ethyl acetate. The combined organic extract was washed with water, brine, and dried over MgSO4 and concentrated. The crude was subjected to silica gel column chromatography (230-400 mesh) using petroleum ether as the eluent to obtain the pure 2-phenylbenzofuran (2.1) as a white solid (140 mg, 96%). The product was characterized by spectroscopy and in comparison with the literature data.

The synthetic route of 54008-77-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Rao, Maddali L.N.; Awasthi, Dheeraj K.; Talode, Jalindar B.; Tetrahedron Letters; vol. 53; 21; (2012); p. 2662 – 2666;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Some tips on 4265-16-1

4265-16-1, The synthetic route of 4265-16-1 has been constantly updated, and we look forward to future research findings.

4265-16-1, Benzo[b]furan-2-carboxaldehyde is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Method B Benzofuran-2-carboxaldehyde (10.0 g, 68 mmol) was dissolved in methanol (70 mL) and cooled to 5 C. Sodium borohydride (2.58 g, 68 mmol) was charged portionwise at 5 C. The batch was aged at 5 C. for 40 minutes and allowed to warm to room temperature (22 C.). The reaction was judged complete by tlc (4:1 hexanes/EtOAc) and the reaction mixture was cooled to 5 C. DI water (20 mL) was charged and the solution was concentrated in vacuo. EtOAc (80 mL) was charged and the solution was washed with DI water (2*20 mL). The EtOAc layer was concentrated in vacuo to provide benzofuran-2-carbinol as an oil.

4265-16-1, The synthetic route of 4265-16-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Merck & Co., Inc.; US6071916; (2000); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Downstream synthetic route of 95333-17-8

The synthetic route of 95333-17-8 has been constantly updated, and we look forward to future research findings.

95333-17-8,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.95333-17-8,Benzofuran-4-carbonitrile,as a common compound, the synthetic route is as follows.

To a solution of benzofuran-4-carbonitrile (750 mg, 4.72 mmol, 1.00 equiv) in methyl alcohol (10.0 mL) was added Boc20 (3.09 g, l4.2mmol, 3.00 equiv) and Pd/C (4.72 mmol, 10.0 w. %, 1.00 equiv). The mixture was stirred at 30 C for 24 h under hydrogen (50.0 psi). The reaction mixture was filtered and concentrated under reduced pressure to give the crude material, which was purified by column chromatography (petroleum ether / ethyl acetate = 1 / 0 to 50 / 1) to afford /er/-butyl N-( 2, 3-dihydrobenzofuran-4-ylmethyl) carbamate (140 mg, 562 pmol, 11.9% yield) as a colorless oil. 1H NMR (400MHz, CDCI3) d = 7.10 (t, J=8.0 Hz, 1H), 6.74 (dd, J=8.0, 14.0 Hz, 2H), 4.75 (br s, 1H), 4.59 (t, J=8.8 Hz, 2H), 4.28 (br d, J=5.6 Hz, 2H), 3.20 (t, J=8.8 Hz, 2H), 1.47 (s, 9H).

The synthetic route of 95333-17-8 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; MIRATI THERAPEUTICS, INC; MARX, Matthew, Arnold; LEE, Matthew, Randolph; BOBINSKI, Thomas, P.; BURNS, Aaron, Craig; ARORA, Nidhi; CHRISTENSEN, James, Gail; KETCHAM, John, Nichael; (225 pag.)WO2019/152419; (2019); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Downstream synthetic route of 37418-88-5

37418-88-5 4-Hydroxyisobenzofuran-1,3-dione 96580, abenzofuran compound, is more and more widely used in various fields.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.37418-88-5,4-Hydroxyisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

3-Hydroxyphthalic anhydride (1.641 g, 10 mmol, 1 eq) and 3-aminopiperidine-2,6- dione hydrochloride (1.646 g, 10 mmol, 1 eq) were dissolved in pyridine (40 mL, 0.25 M) and heated to 110 ¡ãC. After 14 hours, the mixture was cooled to room temperature and concentrated under reduced pressure. Purification by column chromatography (ISCO, 24 g silica column, 0-10percent MeOH/DCM) gave the desired product as a tan solid (2.424 g, 8.84 mmol, 88percent). JH NMR (400 MHz, DMSO-c e) delta 11.08 (s, 2H), 7.65 (dd, J = 8.4, 7.2 Hz, 1H), 7.36 – 7.28 (m, 1H), 7.25 (dd, J= 8.4, 0.6 Hz, 1H), 5.07 (dd, J= 12.8, 5.4 Hz, 1H), 2.88 (ddd, J= 17.3, 14.0, 5.4 Hz, 1H), 2.63 – 2.50 (m, 2H), 2.08 – 1.95 (m, 1H)., 37418-88-5

37418-88-5 4-Hydroxyisobenzofuran-1,3-dione 96580, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; DANA-FARBER CANCER INSTITUTE, INC.; BRADNER, James; BUCKLEY, Dennis; WINTER, Georg; (418 pag.)WO2017/24317; (2017); A2;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Some tips on 7168-85-6

As the paragraph descriping shows that 7168-85-6 is playing an increasingly important role.

7168-85-6, 7-Methoxybenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a mixture of POCl3 (0.65 ml, 0.04 mol) and DMF (2.1 ml, 0.04 mol) at 0 C. was added 7-methoxybenzofuran (1 g, 0.0067 mol). The resulting solution was heated to 80 C. and stirred for 4 h. After being cooled to room temperature, the reaction mixture was poured into ice and extracted with ether. The combined extracts were concentrated in vacuo and purified by silica gel flash column chromatography (10% EtOAc/hexanes) to afford benzaldehyde (750 mg, 64%) as an off-white solid., 7168-85-6

As the paragraph descriping shows that 7168-85-6 is playing an increasingly important role.

Reference£º
Patent; Prosetta Antiviral, Inc.; ATUEGBU, Andy; SOLAS, Dennis; HURT, Clarence R.; KITAYGORODSKYY, Anatoliy; (141 pag.)US2016/168100; (2016); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Downstream synthetic route of 57319-65-0

As the paragraph descriping shows that 57319-65-0 is playing an increasingly important role.

57319-65-0, 6-Aminoisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

57319-65-0, 6-Amino-1(3H)-isobenzofuranone (3.0 g, 20 mmol) obtained from Example 26-(1) was dissolved in a mixture of 47% aqueous hydrobromic acid solution (15 ml) and water (15 ml), then the mixture was cooled to 0C, and a solution of sodium nitrite (1.45 g, 21 mmol) in water (7 ml) was slowly added thereto. Further, a solution of copper (I) bromide (3.6 g, 25 mmol) dissolved in 47% aqueous hydrobromic acid solution (10 ml) was added to the reaction mixture, and the resulting mixture was stirred at 80C for 20 minutes. After cooling the mixture, the liberated product was collected by filtration and then washed with water. The obtained pale brown solid was dissolved in ethyl acetate, then the insoluble material was removed by filtration, and the filtrate was washed successively with a 1N aqueous solution of hydrochloric acid, an aqueous solution of sodium hydrogen carbonate, and an aqueous solution of sodium chloride, and then dried over anhydrous magnesium sulfate. After filtration, the filtrate was concentrated to afford the title compound (3.57 g, 84% yield) as a crystalline solid. NMR spectrum (400 MHz, CDCl3) delta ppm: 5.289 (2H, s), 7.391 (1H, d, J=8 Hz), 7.808 (1H, dd, J=8, 2 Hz), 8.068 (1H, d, J=2 Hz) IR spectrum nu max KBr cm-1: 1778, 1458, 1359, 1191, 1046, 998, 768 Mass spectrum m/z (EI): 214, 212 (M+), 185, 183, 157, 155.

As the paragraph descriping shows that 57319-65-0 is playing an increasingly important role.

Reference£º
Patent; Sankyo Company, Limited; EP1362856; (2003); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem