Category: benzofuran

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.16859-59-9,3-Hydroxyisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

General procedure: To a stirred solution of phthalaldehydic acid 2 (3 mmol) and furan 3 (2.7 mmol;3.3 mmol for 4ab) in acetic acid (8 mL for 4aa, ab?ad; 13 mL for 4ba, ea, fa;20 mL for 4ca, da; 25 mL for 4ga) at room temperature CuBr2 (1.35 mmol;0.27 mmol for 4ea; 0.54 mmol for 4ab) was added. The resulting reactionmixture was stirred for 24 h (18 h for 4aa; 48 h for 4fa) and after reactioncompletion (TLC) was poured into water (150 mL), neutralized with NaHCO3and extracted using DCM (3 40 mL). The combined organic extracts weredried over anhydrous Na2SO4, and the solvent was removed under vacuum.The residue was purified by flash chromatography over silica gel using DCM/petroleum ether (1:1.5, v/v then 2:1, v/v (1:3, v/v for 4ad; 1:6, v/v for 4ac) aseluent and recrystallized from DCM/petroleum ether to afford 3-(fur-2-yl)-3Hisobenzofuran-1-ones 4aa?ad.

16859-59-9, As the paragraph descriping shows that 16859-59-9 is playing an increasingly important role.

Reference£º
Article; Shcherbinin, Vitaly A.; Shpuntov, Pavel M.; Konshin, Valery V.; Butin, Alexander V.; Tetrahedron Letters; vol. 57; 13; (2016); p. 1473 – 1475;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

17403-47-3, 5-Nitro-2,3-dihydrobenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Step 2: Preparation of 5-amino-2,3-dihydrobenzofuran [Show Image] The product (1 g, 6.1 mmol) obtained in Step 1, Raney Ni (0.1 g) and MeOH(10 mL) were used for hydrogenation at room temperature and hydrogen pressure of 50 PSI, until the reaction was finished. The catalyst was removed by filtration, the fitrate was concentrated under vacuum to obtain a product (800 mg, 97.2%)., 17403-47-3

As the paragraph descriping shows that 17403-47-3 is playing an increasingly important role.

Reference£º
Patent; Xuanzhu Pharma Co., Ltd.; EP2532665; (2012); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.28418-88-4,4-Iodoisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

(1-1) Production of N-(4-methyl-3-trifluoromethylisoxazol-5-yl)-3-iodophthalimide In 20 ml of acetic acid, 0.6 g of 3-iodophthalic anhydride and 0.44 g of 5-amino-4-methyl-3-trifluoromethyl-isoxazole were dissolved and reacted for 9 hours with heating under reflux. After completion of the reaction, the solvent was distilled off under reduced pressure, and the residue was dissolved in ethyl acetate, washed with dilute hydrochloric acid, saturated aqueous solution of sodium bicarbonate and saturated aqueous solution of sodium chloride, and then dried on sodium sulfate. After distilling off the solvent under reduced pressure, the residue was purified by silica gel column chromatography using a 3/1 mixture of hexane and ethyl acetate as an eluent to obtain 0.71 g of the objective product. Property: m.p. 105C; Yield: 69%

28418-88-4, 28418-88-4 4-Iodoisobenzofuran-1,3-dione 282071, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Patent; Nihon Nohyaku Co., Ltd.; EP1193254; (2002); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.16859-59-9,3-Hydroxyisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

General procedure: 3.3 Mmol (0.5 g) o-formylbenzoic acid or opianic acid (0.62 g.) was triturated with 2 mL of conc. H2SO4 until dissolution and then was added 0.7 g (3.6 mmol) sodium carbamoylmethyl thiosulfate, triturated again and left for 12 hours at r.t. The reaction mixture was treated with 25 mL of cold water. The solid product was filtered off, washed with water and dried.

16859-59-9, The synthetic route of 16859-59-9 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Ukhin, L.Yu.; Akopova; Bicherov; Kuzmina; Morkovnik; Borodkin; Tetrahedron Letters; vol. 52; 42; (2011); p. 5444 – 5447;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.174775-48-5,Ethyl 5-aminobenzofuran-2-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: To a stirred solution of 1-(2,3-dichlorophenyl) piperazine (entry 3) (5 g, 0.022 mol) in THF (25 mL) was added formamide (2.4 g, 0.054 mol).To the above mixture was added sodium methoxide (30% solution in methanol, 9.7 g, 0.054 mol) and stirred at room temperature for 6 h. The solvent was evaporated and the reaction mixture was diluted with water and extracted with dichloromethane (50 mL ¡Á 2). The dichloromethane layer was washed with 25 mL of dilute HCl and concentrated under reduced pressure to give the product (5.1 g, 92%)., 174775-48-5

The synthetic route of 174775-48-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Joseph, Sony; Das, Prasenjit; Srivastava, Bindu; Nizar, Hashim; Prasad, Mohan; Tetrahedron Letters; vol. 54; 8; (2013); p. 929 – 931;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

37418-88-5, 4-Hydroxyisobenzofuran-1,3-dione is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

A mixture of 3-hydroxyphthalic anhydride (543 mg, 3.31 mmol), 4-methoxybenzylamine (0.43 mL, 3.31 mmol) and acetic acid (3 mL) was heated at 1000C for 4 hours. The mixture was allowed to cool and diluted with water (20 mL). The white solid was collected by filtration, washed well with water and dried to give the title compound (760 mg, 81 percent). 1H NMR (DMSOd6) 11.03 (1 H, s), 7.61 (1H, dd), 7.28 (1 H, d), 7.23-7.19 (3H, m), 6.89-6.86 (2H, m), 4.63 (2H, s), 3.71 (3H, s). MS: [M-H+] 282., 37418-88-5

The synthetic route of 37418-88-5 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ASTEX THERAPEUTICS LIMITED; WO2008/44041; (2008); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.27550-59-0,5-Hydroxyisobenzofuran-1,3-dione,as a common compound, the synthetic route is as follows.

6th Stage: 4-[11-(acryloyl-methyl-amino)-undecyloxy]phthalic Acid (AAUPA) 4-hydroxyphthalic anhydride (6.70 g; 40.8 mmol), BHT (10 mg) and N-(11-bromoundecyl)-N-methyl acrylamide (13.00 g; 40.8 mmol) were dissolved in N,N-dimethylformamide (100 ml). Potassium carbonate (5.64 g; 40.8 mmol) was added. The yellow suspension was stirred at RT. Water (200 ml) was added to the reaction mixture after 20 d and the whole stirred for 1 h at RT. An oily white solid precipitated from the initially cloudy solution. The solvent was decanted off. The residue was dissolved in dilute aqueous Na2CO3 solution (5%; 100 ml). The milky/cloudy aqueous phase was washed with MtBE (5*100 ml). Diluted hydrochloric acid (2N, 100 ml) was added to the water phase (pH=1) and extraction with MtBE (8*100 ml) took place. The combined extracts were dried over Na2SO4, filtered and concentrated on the rotary evaporator. Chloroform (150 ml) was added to the residue and the whole stirred at RT. After 20 h the suspension was filtered. The filtration residue was washed with chloroform (50 ml) and discarded. The filtrate was concentrated on the rotary evaporator. The residue was dissolved in chloroform (50 ml). Acetonitrile (50 ml) was added. After 72 h storage at -18 C. the solvent was decanted off and the residue dried under a fine vacuum. 3.84 g (9.2 mmol; 22% yield) of a white solid was obtained (melting point: 95 C.), which dissolves very well e.g. in ethanol or acetone. 1H-NMR (DMSO-d6, 400 MHz): delta (2 isomers)=1.15-1.35 (m, 12H), 1.36-1.50 (m, 4H), 1.68-1.75 (m, 2H), 2.86 (s, 1.7H), 3.00 (s, 1.3H), 3.29-3.36 (m, 2H), 4.04 (t, 2H; J=6.4 Hz), 5.61-5.65 (m, 1H), 6.06-6.13 (m, 1H), 6.72 (dd, 1H; J=10.7 Hz, 16.9 Hz), 7.03-7.08 (m, 2H), 7.73 (d, 1H; J=8.4 Hz), 12.89 (br, 2H). 13C-NMR (DMSO-d6, 100 MHz): delta=24.3, 24.8, 25.2, 25.5, 27.3, 27.5, 27.6, 27.7, 27.8, 27.9, 32.2, 33.7, 45.8, 47.8, 66.9, 112.3, 114.2, 121.3, 125.6, 127.2, 127.6, 130.1, 136.0, 159.7, 164.0, 166.2, 168.1.

27550-59-0, As the paragraph descriping shows that 27550-59-0 is playing an increasingly important role.

Reference£º
Patent; IVOCLAR VIVADENT AG; BOCK, Thorsten; FISCHER, Urs Karl; LAMPARTH, Iris; MOSZNER, Norbert; RHEINBERGER, Volker; US2013/90404; (2013); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

4265-16-1, Benzo[b]furan-2-carboxaldehyde is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a solution of benzofuran-2-carbaldehyde (3.0 g, 20.5 mmol) and hydroxylamine hydrochloride (2.1 g, 30.8 mmol) in dichloromethane was added triethylamine (3.1 g, 30.8 mmol) slowly at 0 C. The reaction mixture was allowed to stir at room temperature for 3 hours. Once complete by TLC analysis the reaction mixture was washed with water (2 x 20 mL) and brine before being dried over anhydrous sodium sulfate. After concentration, the crude product was purified by column chromatography [petroleum ether/ethyl acetate=15: l] to afford compound B- 104 (3.0 g, 91% yield) as a yellow solid. LCMS: (ES+) m/z (M+H)+ = 162.2, tR=0.605 and 0.653., 4265-16-1

The synthetic route of 4265-16-1 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; FORUM PHARMACEUTICALS, INC.; BURNETT, Duane, A.; BURSAVICH, Matthew, Gregory; MCRINER, Andrew, J.; WO2015/66371; (2015); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

76429-69-1, 5-Chloro-2,3-dihydrobenzofuran is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

76429-69-1, a) To a stirred and cooled mixture of 32 nil of sulfuric acid and 14 ml of water there were added 17 g of 2,3-dihydro-5-chlorobenzofuran, while keeping the temperature at 25 C. After cooling to 0 C., there were added dropwise 14 ml of nitric acid. Stirring and cooling at 0 C. was continued for 44 hours. The reaction mixture was diluted with water (temp. <10 C.) and stirred for 15 min. The precipitate was filtered off, washed with water and recrystallized from a mixture of ethyl acetate and hexane (30:70), yielding 8.9 g (40.5%) of 5-chloro-2,3-dihydro-7-nitrobenzofuran (interm. 3). 76429-69-1 5-Chloro-2,3-dihydrobenzofuran 592964, abenzofuran compound, is more and more widely used in various. Reference£º
Patent; Janssen Pharmaceutica N.V.; US5407961; (1995); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.15832-09-4,6-Methoxy-3(2H)-benzofuranone,as a common compound, the synthetic route is as follows.

General procedure: To a solution of 2-12 in ethanol (100 mg, 0.62 mmol, 13 ml/mmol) was added the suitably functionalized benzaldehydes (0.62 mmol), followed by a solution of KOH 20% in water (0.8 ml/mmol). The solution is stirred at room temperature for 2 h. The reaction mixture was concentrated in vacuo and diluted with distilled water. The aqueous layer was extracted with ethyl acetate and dried (Na2SO3). The organic phase was evaporated in vacuo to yield crude products which were subjected to column chromatography by using amino silica gel as adsorbent and solvent system of hexane: ethyl acetate (7:3) followed by silica gel column chromatography by using chloroform: methanol (9.5:0.5) to yield Series 2 derivatives except for 2-6 and 2-9., 15832-09-4

The synthetic route of 15832-09-4 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Liew, Kok-Fui; Chan, Kit-Lam; Lee, Chong-Yew; European Journal of Medicinal Chemistry; vol. 94; (2015); p. 195 – 210;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem