Heterocyclic Building Block-benzofuran

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.1914-60-9,2,3-Dihydrobenzofuran-2-carboxylic acid,as a common compound, the synthetic route is as follows.

General procedure: To a mixture of 7 (1 eq) and 1,1?-carbodiimidazole (1.2 eq) in anhydrous THF was stirred for 1h then substituted aniline (0.9 eq) was added at room temperature. After stirring for 14 h, solvent was evaporated then the mixture acidified with 6N HCl to pH 2. The mixture was extracted with EtOAc (3 ¡Á 20 mL). The combined extracts were dried over anhydrous Na2SO4and the solvent was evaporated. After evaporation, the residue was purified by column chromatography (EtOAc/hexane = 1:3 – 1:50)., 1914-60-9

As the paragraph descriping shows that 1914-60-9 is playing an increasingly important role.

Reference£º
Article; Choi, Minho; Jo, Hyeju; Park, Hyun-Jung; Sateesh Kumar, Arepalli; Lee, Joonkwang; Yun, Jieun; Kim, Youngsoo; Han, Sang-Bae; Jung, Jae-Kyung; Cho, Jungsook; Lee, Kiho; Kwak, Jae-Hwan; Lee, Heesoon; Bioorganic and Medicinal Chemistry Letters; vol. 25; 12; (2015); p. 2545 – 2549;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

496-16-2, 2,3-Dihydrobenzo[b]furan is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: A mixture of arene (0.5 mmol), I2O5 (334 mg, 1.0 mmol), and KBr (148 mg, 1.25 mmol) was dissolved in 2mL of H2O. The reaction was complete after stirring for the indicated time at room temperature. The mixture was extracted by ethyl acetate and concentrated under reduced pressure, and the mixture was purified by flash column chromatography (silica gel) to afford the desired product., 496-16-2

The synthetic route of 496-16-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Hou, Jieping; Li, Zejiang; Jia, Xiao-Dong; Liu, Zhong-Quan; Synthetic Communications; vol. 44; 2; (2014); p. 181 – 187;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

15832-09-4, 6-Methoxy-3(2H)-benzofuranone is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

General procedure: To a solution of 2-12 in ethanol (100 mg, 0.62 mmol, 13 ml/mmol) was added the suitably functionalized benzaldehydes (0.62 mmol), followed by a solution of KOH 20% in water (0.8 ml/mmol). The solution is stirred at room temperature for 2 h. The reaction mixture was concentrated in vacuo and diluted with distilled water. The aqueous layer was extracted with ethyl acetate and dried (Na2SO3). The organic phase was evaporated in vacuo to yield crude products which were subjected to column chromatography by using amino silica gel as adsorbent and solvent system of hexane: ethyl acetate (7:3) followed by silica gel column chromatography by using chloroform: methanol (9.5:0.5) to yield Series 2 derivatives except for 2-6 and 2-9., 15832-09-4

As the paragraph descriping shows that 15832-09-4 is playing an increasingly important role.

Reference£º
Article; Liew, Kok-Fui; Chan, Kit-Lam; Lee, Chong-Yew; European Journal of Medicinal Chemistry; vol. 94; (2015); p. 195 – 210;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

496-16-2, 2,3-Dihydrobenzo[b]furan is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

To a stirred solution of 2,3-dihydrobenzo[b]furan (9.4 mL, 83.4 mmol) in dichloromethane (250 mL) under Ar at -5 C. was added dropwise titanium(IV) chloride (18 mL, 167.0 mmol) over 15 min, maintaining the temperature below 0 C. After addition was complete, the red-brown reaction mixture was allowed to stir for a further 10 min before alpha,alpha-dichloromethyl methyl ether (8.3 mL, 91.6 mmol) was added dropwise [CAUTION-exotherm] maintaining the temperature below 0 C. Upon complete addition, the vivid crimson reaction mixture was allowed to warm to ambient temperature over 2 h, and was then cautiously poured onto a saturated aqueous solution of sodium bicarbonate (700 mL). The mixture was filtered through a pad of Kieselguhr, which was washed through with dichloromethane. The phases were separated and the aqueous phase was extracted with dichloromethane (2¡Á400 mL). The combined organic fractions were washed with brine (300 mL), dried (magnesium sulfate) and concentrated in vacuo to afford a mixture [5-CHO:7-CHO (4:1)] of aldehyde products (11.48 g, 93%) as a green-black liquid which as used without further purification., 496-16-2

The synthetic route of 496-16-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; VERNALIS RESEARCH LIMITED; US2005/187282; (2005); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.57319-65-0,6-Aminoisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

57319-65-0, To a suspension of 6-aminoisobenzofuran-1(3H)-one 4 (13.43 g, 90 mmol) in CH2Cl2 (200 mL) at 0 C was added 2,2,2-trichloroethyl carbonochloridate (18.23 mL, 135 mmol) followed by pyridine (17.79 mL, 180 mmol) and allowed to stir at room temperature for 1 h. TLC and HPLC shows reaction was complete. Filtered and washed with DCM (2×30 ml) to afford product 5 as white solid (17.03g, 58%). LCMS: [M+1] = 324. 1H NMR (400 MHz,Acetone-D6): delta 9.55 (brs, 1H), 8.16 (d, J = 2.0 Hz, 1H), 7.91 (dd, J = 8.0, 2.0 Hz, 1H), 7.64 (d, J = 8.0 Hz, 1H), 5.36 (s, 2H), 4.95 (s, 2H).

The synthetic route of 57319-65-0 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Chowdari, Naidu S.; Pan, Chin; Rao, Chetana; Langley, David R.; Sivaprakasam, Prasanna; Sufi, Bilal; Derwin, Daniel; Wang, Yichong; Kwok, Eilene; Passmore, David; Rangan, Vangipuram S.; Deshpande, Shrikant; Cardarelli, Pina; Vite, Gregory; Gangwar, Sanjeev; Bioorganic and Medicinal Chemistry Letters; vol. 29; 3; (2019); p. 466 – 470;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

6296-53-3,6296-53-3, N-(1,3-Dioxo-1,3-dihydroisobenzofuran-4-yl)acetamide is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

10213] A stirred solution of 1-(3-ethoxy-4-methoxyphe- nyl)-2-methyl sulfonylethylamine (1.0 g, 3.7 mmol) and 3-acetamidophthalic anhydride (751 mg, 3.66 mmol) in acetic acid (20 mL) was heated at reflux for 15 h. The solvent was removed in vacuo to yield an oil. Chromatography of the resulting oil yielded the product as a yellow solid (1.0 g, 59% yield): mp, 144 C.; ?H NMR (CDC13) oe: 1.47 (t, J=7.0 Hz, 3H, CH3), 2.26 (s, 3H, CH3), 2.88 (s, 3H, CH3), 3.75 (dd, J=4.4, 14.3 Hz, 1H, CH), 3.85 (s, 3H, CH3), 4.11 (q, J=7 Hz, 2H, CH2), 5.87 (dd, J=4.3, 10.5 Hz, 1H, NCH), 6.82-6.86 (m, 1H, Ar), 7.09-7.11 (m, 2H, Ar), 7.47 (d, J=7 Hz, 1H, Ar), 7.64 (t, J=8 Hz, 1H, Ar), 8.74 (d, J=8 Hz, 1H, Ar), 9.49 (br s, 1H, NH); ?3CNMR (CDC13) oe: 14.61,24.85,41.54,48.44,54.34, 55.85, 64.43, 111.37, 112.34, 115.04, 118.11, 120.21, 124.85, 129.17, 130.96, 136.01, 137.52, 148.54, 149.65, 167.38,169.09, 169.40; Anal Calc?d. for C22H24N075: C, 57.38; H, 5.25; N, 6.08. Found: C, 57.31; H, 5.34; N, 5.83.

As the paragraph descriping shows that 6296-53-3 is playing an increasingly important role.

Reference£º
Patent; Celgene Corporation; CHEN, Ming J.; HUI, HO-WAH; SHEN, XIAOLE; (48 pag.)US2016/128981; (2016); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

35700-40-4, 2,3-Dihydrobenzofuran-7-carboxylic acid is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

b. Preparation of 5-bromo-2,3-dihydrobenzo[b]furan-7-carboxylic acid (15b) To an ice-cooled acetic acid solution (5 ml) of 2,3-dihydrobenzo[b]furan-7-carboxylic acid (15a) (0.33 g, 2.0 mmol) there was added iron (8 mg, 0.14 mmol) and bromine (0.32 g, 2.0 mmol) in 1 ml of acetic acid. The mixture was stirred at room temperature for 18 hours and then poured into water (20 ml). After cooling in the freezer for 1 1/2 hours the product was collected on a filter, and recrystallized from ethyl acetate to give 0.24 g (50.3%) of 15b as a white crystalline solid, mp 228-229C.

35700-40-4, As the paragraph descriping shows that 35700-40-4 is playing an increasingly important role.

Reference£º
Patent; Erbamont Inc.; EP234872; (1991); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.64169-34-2,5-Bromoisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

A three-neck 5L round bottomed flask equipped with a stir bar, firestone valve, thermocouple, condenser andheating mantle was charged with tri-t-butyl phosphonium tetrafluoroborate (500 mg, 1.7 mmol), palladium (II) acetate(250 mg, 1.1 mmol) and 5-bromo-2-benzofuran-1(3H)-one (100 g, 470 mmol). DMF (1.9 L) was added to the flask, andthe mixture was degassed three times by alternating vacuum and nitrogen purge. Commercially available bromo(1,3-dioxolan-2-ylmethyl)zinc solution (1.0 L, 520 mmol) was added via canula and the mixture was again degassed threetimes. The mixture was then heated at 85 C for 5 h. Analysis by HPLC-MS indicated the reaction was not complete.The mixture was stirred at 85 C for 5 more h. The mixture was then allowed to return to room temperature for overnight.2-methyltetrahydrofuran (2.0 L) and brine were added, and the mixture was stirred for 5 min. The layers were separatedand the aqueous layer was extracted again with 2-methyltetrahydrofuran. The organic layers were combined, washedthree times with brine, dried over MgSO4,filtered, and concentrated. The resulting residue was purified by flash chromatography(1.5 kg silica cartridge), eluting with 0->20% ethyl acetate in dichloromethane to afford 5-(1,3-dioxolan-2-ylmethyl)-2-benzofuran-1(3H)-one. MS: m/z 221 (M+1)+.

64169-34-2, As the paragraph descriping shows that 64169-34-2 is playing an increasingly important role.

Reference£º
Patent; Merck Sharp & Dohme Corp.; WALSH, Shawn; PASTERNAK, Alexander; CATO, Brian; FINKE, Paul, E.; FRIE, Jessica; FU, Qinghong; KIM, Dooseop; PIO, Barbara; SHAHRIPOUR, Aurash; SHI, Zhi-Cai; TANG, Haifeng; (136 pag.)EP2755656; (2016); B1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.4265-25-2,2-Methylbenzofuran,as a common compound, the synthetic route is as follows.,4265-25-2

TIPS-EBX (8, 342 mg, 0.800 mmol, 2.0 equiv), AuCl (4.6 mg,0.020 mmol, 0.050 equiv), Zn(OTf)2 (289 mg, 0.800 mmol, 2.0 equiv) and benzofuran derivatives 7 (0.40 mmol, 1.0 equiv) were added into CH3CN (2.0 mL) under air. The mixture was stirred for 26 hours at 60 C. Then the mixture was concentrated with silica gel and purified by column chromatography directly.

The synthetic route of 4265-25-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Article; Li, Yifan; Waser, Jerome; Beilstein Journal of Organic Chemistry; vol. 9; (2013); p. 1763 – 1767;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.81742-10-1,3,6-Dichlorotrimellitic Anhydride,as a common compound, the synthetic route is as follows.,81742-10-1

General procedure: The synthetic steps of MPc (COOH) 4Cl8 (Scheme 1). A mixture of1.0025 g of 3,6-dichloro-1,2,4-benzenetricarboxylic anhydride,6.0000 g of urea, 0.3654 g of Mn(CH3COOH)2¡¤4H2O, 0.25 g of NH4Cland 0.1200 g of (NH4)2Mo2O7 in 100 mL three-necked flask was heatedat 140 C for 0.5 h with magnetic stirrer and reflux condenser, and thenkept at 220 C for 6 h under ambient air conditions. The by-productswere washed with water followed by 6 mol L-1 hydrochloric acid forseveral times. Then the purification of blue solid was achieved by refluxingwith 150 mL of acetone and trichloromethane about 12 h.The obtained octachloro-tetracarboxamide phthalocyanine was hydrolyzedwith 100 mL of 2.0 mol¡¤L-1 sodium hydroxide solution at 100 C for 12 h, filtered, and the filtrate was adjusted to pH=1 withhydrochloric acid, a large amount of precipitates were produced andfiltered by the G4 sand core funnel, the filter cake was washed first withdeionized water until the filtrate was neutral. Then the filter cake waswashed with in proper order. The solid product was vacuum dried at100 C. The as-prepared MPcTcCl8 were washed by chloroform,ethanol, ether, acetone and THF respectively, dried in vacuum overnightat 100 C.

81742-10-1 3,6-Dichlorotrimellitic Anhydride 15883776, abenzofuran compound, is more and more widely used in various fields.

Reference£º
Article; Gao, Min; Zhang, Gai; Tian, Min; Liu, Bulei; Chen, Weixing; Inorganica Chimica Acta; vol. 485; (2019); p. 58 – 63;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem