With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.610-93-5,6-Nitroisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.
610-93-5, General procedure: The catalytic reduction of nitro aromatics was conducted in a 25 mlTelfon-lined stainless steel autoclave with magnetic stirring. In a typicalprocess, 6 mmol nitroarene, and desired amounts of reducing agent andsolvents were introduced in the reactor. The autoclave was transferredinto a water bath at the set temperature with an accuracy of better than0.2 C for ?0.5 h. Then, 10 mg catalyst was added into the reactionmixture and started the reduction at a stirring rate of 450 rpm. After thereaction, the catalyst was rapidly separated by ltration. n-Decane(500 muL) as standard was added into the ltrate and was dried withanhydrous Na 2 SO 4 . The products were analyzed by gas chromato-graphy-mass spectrometry (GC-MS) (Shimadzu GCMS-QP2010 Plus)and GC (Varian CP-3800) with a capillary column (column VF-1 ms,15 m, 0.25 mm, 0.25 mum) and a ame ionization detector (FID).
As the paragraph descriping shows that 610-93-5 is playing an increasingly important role.
Article; Huang, Haigen; Liang, Xiangcheng; Wang, Xueguang; Sheng, Yao; Chen, Chenju; Zou, Xiujing; Lu, Xionggang; Applied Catalysis A: General; vol. 559; (2018); p. 127 – 137;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem