Day: March 4, 2022

57830-14-5, 5-Phenoxyisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,57830-14-5

102351 A reactor was charged with toluene (24 Kg), and stirring was initiated. The reactor was then charged with 5-phenoxyphthalide (56 Kg), thionyl chloride (41 Kg), trimethyl borate (1 Kg), dichlorotriphenylphosphorane (2.5 Kg), and potassium carbonate (77 Kg). The mixture was heated to reflux until reaction completion and solvent was removed leaving 2-chloromethyl-4-phenoxybenzoylchloride. Methanol was charged and the mixture was heated above 50 C until reaction completion. Solvent was removed and replaced with DMF. This solution of the product methyl 2-chloromethyl-4- phenoxybenzoic acid methyl ester in DMF was used directly in the next step (HPLC: 85%).

57830-14-5 5-Phenoxyisobenzofuran-1(3H)-one 44558580, abenzofuran compound, is more and more widely used in various fields.

Reference：
Patent; FIBROGEN, INC.; THOMPSON, Michael D.; PARK, Jung Min; AREND, Michael P.; WO2014/14834; (2014); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

374706-07-7, 1-(2,3-Dihydrobenzofuran-6-yl)ethanone is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The title compound was prepared according to procedures reported in the literature and known by persons skill in the art, using 1-(2,3-dihydrobenzofuran-6-yl)ethan-1-one (0.6 g, 3.7 mmol) as starting material. In a preferred method, to a stirred solution of 1-(2,3-dihydrobenzofuran-6-yl)ethan-1-one (0.6 g, 3.7 mmol) in methanol (10 mL), sodium borohydride (281 mg, 7.4 mmol) was added slowly at 0 C and stirred 1.5 h. The completion of the reaction was monitored by TLC and the solvents were evaporated at 45 C under vacuum. The residue was diluted with EtOAc (25 mL) and washed with water (25 mL), brine solution (25 mL) and dried over Na2SO4. After evaporation of the solvent, the title compound was isolated and used without further purification. Yield: 88.30% (0.53 g, colourless liquid). 1H NMR (400 MHz, DMSO-d6): delta 7.1 1 (d, J = 7.6 Hz, 1H), 6.77-6.75 (m, 1 H), 6.71 (s, 1H), 5.04 (d, J = 4.4 Hz, 1H), 4.63-4.61 (m, 1H), 4.48 (t, J = 8.8 Hz, 2H), 3.1 1 (t, J = 8.8 Hz, 2H), 1 .25 (d, J = 6.4 Hz, 3H). LCMS: (Method A) 147.0 (M-17H), Rt. 2.64 min, 89.95% (Max).

374706-07-7, The synthetic route of 374706-07-7 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; ASCENEURON S. A.; QUATTROPANI, Anna; KULKARNI, Santosh S.; GIRI, Awadut Gajendra; KOEK, Johannes Nicolaas; (64 pag.)WO2017/144635; (2017); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

374706-07-7, 1-(2,3-Dihydrobenzofuran-6-yl)ethanone is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

The title compound was prepared according to procedures reported in the literature and known by persons skill in the art, using 1-(2,3-dihydrobenzofuran-6-yl)ethan-1-one (0.6 g, 3.7 mmol) as starting material. In a preferred method, to a stirred solution of 1-(2,3-dihydrobenzofuran-6-yl)ethan-1-one (0.6 g, 3.7 mmol) in methanol (10 mL), sodium borohydride (281 mg, 7.4 mmol) was added slowly at 0 C and stirred 1.5 h. The completion of the reaction was monitored by TLC and the solvents were evaporated at 45 C under vacuum. The residue was diluted with EtOAc (25 mL) and washed with water (25 mL), brine solution (25 mL) and dried over Na2SO4. After evaporation of the solvent, the title compound was isolated and used without further purification. Yield: 88.30% (0.53 g, colourless liquid). 1H NMR (400 MHz, DMSO-d6): delta 7.1 1 (d, J = 7.6 Hz, 1H), 6.77-6.75 (m, 1 H), 6.71 (s, 1H), 5.04 (d, J = 4.4 Hz, 1H), 4.63-4.61 (m, 1H), 4.48 (t, J = 8.8 Hz, 2H), 3.1 1 (t, J = 8.8 Hz, 2H), 1 .25 (d, J = 6.4 Hz, 3H). LCMS: (Method A) 147.0 (M-17H), Rt. 2.64 min, 89.95% (Max).

374706-07-7, The synthetic route of 374706-07-7 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; ASCENEURON S. A.; QUATTROPANI, Anna; KULKARNI, Santosh S.; GIRI, Awadut Gajendra; KOEK, Johannes Nicolaas; (64 pag.)WO2017/144635; (2017); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.374706-07-7,1-(2,3-Dihydrobenzofuran-6-yl)ethanone,as a common compound, the synthetic route is as follows.

2-Bromo-l-(2,3-dihydro-benzofuran-6-yl)-ethanoneBr2 (0.36 ml, 7.01 mmol) was added dropwise to a stirring solution of l-(2,3-dihydro- benzofuran-6-yl)-ethanone (1.13 g, 6.97 mmol) in MeOH (20 mL) held at 00C. The reaction mixture was slowly allowed to reach room temperature. After 3 h, the reaction was quenched by the addition of NaHCO3 (aq, saturated)(until pH=8). Most of the methanol was removed under reduced pressure and the residue was extracted twice with EtOAc (2×20 mL). The organic extracts were pooled, washed with brine (10 mL), dried over MgSO4 and concentrated under reduced pressure. The residue was purified by preparative HPLC using a gradient of 40-70% MeCN in a 0.1M ammonium acetate buffer as eluent. The fractions containing the desired product were pooled and most of the MeCN was removed under EPO reduced pressure. The residue was extracted with EtOAc (2×20 mL) and the combined organic layers was washed with brine, dried over MgSO4 and concentrated. The obtained was finely washed MeOH to give the title compound.1H-NMR (CDC13, 400 MHz): delta 3.25 (t, 2H), 4.39 (s, 2H), 4.61 (t, 2H), 7.24-7.36 (m, 2H), 7.45-7.52 (m, IH).-, 374706-07-7

As the paragraph descriping shows that 374706-07-7 is playing an increasingly important role.

Reference：
Patent; ASTRAZENECA AB; WO2006/137796; (2006); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.57830-14-5,5-Phenoxyisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

To a solid mixture of 5-phenoxy-3H-isobenzofuran-l-one (65.54 g, 0.29 mol), boric acid (538 mg, 8.7 mmol) and triphenylphosphine oxide (2.42 g, 8.7 mmol) was added thionyl chloride (42.3 mL). The resulting mixture was refluxed overnight. After cooled, methanol (300 mL) was slowly added to the reaction mixture. It was then refluxed for 1 h and concentrated. Residue was partitioned between EtOAc and saturated NaHC03 solution. The organic layer was washed with brine, dried over Na2S04, filtered and concentrated to provide the title compound (87.02 g, 0.31 mol) as an oil. It was used directly to the next reaction without further purification. lH NMR in CDCI3, delta in ppm: 7.91 (d, 1 H, 8.6 Hz), 7.5-6.9 (m, 7 H), 5.06 (s, 2 H), 3.83 (s, 3 H)., 57830-14-5

The synthetic route of 57830-14-5 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; FIBROGEN, INC.; HO, Wen-Bin; ZHAO, Hongda; DENG, Shaojiang; NG, Danny; WRIGHT, Lee R.; WU, Min; ZHOU, Xiaoti; AREND, Michael P.; FLIPPIN, Lee A.; WO2013/134660; (2013); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem