Tag: 90843-31-5

90843-31-5,With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.90843-31-5,5-Acetyl-2,3-dihydrobenzo[b]furan,as a common compound, the synthetic route is as follows.

To a stirred solution of 1-(2,3-dihydrobenzofuran-5-yl)ethan-1-one (2.0 g, 13.0 mmol) in dry MeOH (20 mL), NaBH4 (0.68 g, 26.0 mmol, Loba chemie) was added slowly at 0 C. The reaction mixture was stirred at rt for 1 h. It was then concentrated under vacuum and the resulting crude product was dissolved in DCM (50 mL), washed with water, brine, dried over anhydrous Na2SO4 and concentrated under reduced pressure. The crude product was used in the next step without further purification. Yield: 91 % (1.83 g).

As the paragraph descriping shows that 90843-31-5 is playing an increasingly important role.

Reference£º
Patent; ASCENEURON SA; QUATTROPANI, Anna; KULKARNI, Santosh S.; GIRI, Awadut Gajendra; (243 pag.)WO2016/30443; (2016); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

90843-31-5, 5-Acetyl-2,3-dihydrobenzo[b]furan is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,90843-31-5

General procedure: The target thiosemicarbazones were prepared by dissolving corresponding ketone (2a-b) (0.005 mol) and appropriate thiosemicarbazide (1a-q) (0.005 mol) in ethanol containing 1-2 drops of HCl as catalyst. The reaction mixture was heated under reflux at 80 C for 2-3 h and course of the reaction was monitored by TLC. After the reaction completion,the excess solvent was evaporated under vacuum and the crystalline or amorphous product formed was filtered, washed with hot ethanol and then with diethyl ether to afford the required thiosemicarbazones (3a-u) in excellent yields. The synthesized thiosemicarbazones were further recrystallized by mixture of chloroform-ethanol (1:1). For X-ray measurements, single crystal of 3m was mounted on a MiTeGen loop with grease and examined on a Bruker D8 Venture APEX diffractometer equipped with Photon 100 CCD area detector and Oxford Cryostream cooler at 296 (2) K using graphite-monochromated Mo-Kalpharadiation (lambda=0.71073 A). Data was collected using the APEX-II software [33], integrated using SAINT [34] and corrected for absorption using a multi-scan approach (SADABS) [35]. The structure was solved using intrinsic phasing (SHELXT) [36]. Final cell constants were determined from full least squares refinement of all observed reflections. All non-H atoms were located in subsequent difference maps and refined anisotropically with SHELXL-97 [37], using full least squares refinement against F2. H-atoms were added at calculated positions and refined with a riding model. The structure has been deposited with the CCDC (CSD deposition numbers 1874544).

As the paragraph descriping shows that 90843-31-5 is playing an increasingly important role.

Reference£º
Article; Islam, Muhammad; Khan, Ajmal; Shehzad, Muhammad Tariq; Hameed, Abdul; Ahmed, Nadeem; Halim, Sobia Ahsan; Khiat, Mohammed; Anwar, Muhammad Usman; Hussain, Javid; Csuk, Rene; Shafiq, Zahid; Al-Harrasi, Ahmed; Bioorganic Chemistry; vol. 87; (2019); p. 155 – 162;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.90843-31-5,5-Acetyl-2,3-dihydrobenzo[b]furan,as a common compound, the synthetic route is as follows.

Preparation of -(2,3-dihydrobenzofuran-5-yl)acetamide Into a 2000 mL round-bottom flask, was placed a solution of 1-(2,3-dihydrobenzofuran-5-yl)ethanone (67 g, 413.58 mmol, 1.00 equiv) in MeOH (600 mL). To this was added NH2OH.HCl (34.5 g, 496.40 mmol, 1.20 equiv). To the mixture was added pyridine (Py, 42.5 g, 537.97 mmol, 1.30 equiv). The resulting solution was allowed to react, with stirring, overnight while the temperature was maintained at room temperature. The mixture was concentrated by evaporation under vacuum using a rotary evaporator. The residue was dissolved in 100 mL of water. The resulting solution was extracted two times with 100 mL of EtOAc and the organic layers combined and dried over Na2SO4 and concentrated by evaporation under vacuum using a rotary evaporator. This resulted in 70 g (crude) of 1-(2,3-dihydrobenzofuran-5-yl)ethanone oxime. HCl gas was bubbled through a solution of the oxime (70 g) in Ac2O (86 mL) and HOAc (500 mL). The resulting solution was allowed to react, with stirring, overnight at 20 C. The precipitate was poured into ice/water. The mixture was stirred for 4 h. A filtration was performed. The solid was product (part 1). The filtrate was extracted two times with dichloromethane and was dried over Na2SO4 and concentrated. The solid was also product (part 2). Two parts combined and this resulted in 70 g (86%) N-(2,3-dihydrobenzofuran-5-yl)acetamide as a brown oil.

As the paragraph descriping shows that 90843-31-5 is playing an increasingly important role.

Reference£º
Patent; MEMORY PHARMACEUTICALS CORPORATION; US2008/318941; (2008); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem