Heterocyclic Building Block-benzofuran

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.23405-32-5,Methyl 1-oxo-1,3-dihydroisobenzofuran-5-carboxylate,as a common compound, the synthetic route is as follows.

General procedure: Isobenzofuran-1(3H)-one (0.4 mmol), KOH (0.4 mmol), PhSiH3 (1.2 mmol), dried THF (2 mL) were charged in a Schlenk tube(15 mL) under N2 atmosphere. The mixture was refluxed for 4 h. After cooling to rt, the reaction was quenched with EtOH(0.5-1 mL). Solvent was removed under reduced pressure and the crude residue was purified by column chromatography on silica gel with petroleum ether-ethyl acetate as the eluent to afford the desired product.

23405-32-5, 23405-32-5 Methyl 1-oxo-1,3-dihydroisobenzofuran-5-carboxylate 23299433, abenzofuran compound, is more and more widely used in various fields.

Reference：
Article; Liu, Bin; Zhou, Xigeng; Chinese Chemical Letters; vol. 30; 3; (2019); p. 725 – 728;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.374706-07-7,1-(2,3-Dihydrobenzofuran-6-yl)ethanone,as a common compound, the synthetic route is as follows.

2-Bromo-l-(2,3-dihydro-benzofuran-6-yl)-ethanoneBr2 (0.36 ml, 7.01 mmol) was added dropwise to a stirring solution of l-(2,3-dihydro- benzofuran-6-yl)-ethanone (1.13 g, 6.97 mmol) in MeOH (20 mL) held at 00C. The reaction mixture was slowly allowed to reach room temperature. After 3 h, the reaction was quenched by the addition of NaHCO3 (aq, saturated)(until pH=8). Most of the methanol was removed under reduced pressure and the residue was extracted twice with EtOAc (2×20 mL). The organic extracts were pooled, washed with brine (10 mL), dried over MgSO4 and concentrated under reduced pressure. The residue was purified by preparative HPLC using a gradient of 40-70% MeCN in a 0.1M ammonium acetate buffer as eluent. The fractions containing the desired product were pooled and most of the MeCN was removed under EPO reduced pressure. The residue was extracted with EtOAc (2×20 mL) and the combined organic layers was washed with brine, dried over MgSO4 and concentrated. The obtained was finely washed MeOH to give the title compound.1H-NMR (CDC13, 400 MHz): delta 3.25 (t, 2H), 4.39 (s, 2H), 4.61 (t, 2H), 7.24-7.36 (m, 2H), 7.45-7.52 (m, IH).-, 374706-07-7

As the paragraph descriping shows that 374706-07-7 is playing an increasingly important role.

Reference：
Patent; ASTRAZENECA AB; WO2006/137796; (2006); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

57830-14-5, 5-Phenoxyisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,57830-14-5

102351 A reactor was charged with toluene (24 Kg), and stirring was initiated. The reactor was then charged with 5-phenoxyphthalide (56 Kg), thionyl chloride (41 Kg), trimethyl borate (1 Kg), dichlorotriphenylphosphorane (2.5 Kg), and potassium carbonate (77 Kg). The mixture was heated to reflux until reaction completion and solvent was removed leaving 2-chloromethyl-4-phenoxybenzoylchloride. Methanol was charged and the mixture was heated above 50 C until reaction completion. Solvent was removed and replaced with DMF. This solution of the product methyl 2-chloromethyl-4- phenoxybenzoic acid methyl ester in DMF was used directly in the next step (HPLC: 85%).

57830-14-5 5-Phenoxyisobenzofuran-1(3H)-one 44558580, abenzofuran compound, is more and more widely used in various fields.

Reference：
Patent; FIBROGEN, INC.; THOMPSON, Michael D.; PARK, Jung Min; AREND, Michael P.; WO2014/14834; (2014); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.374706-07-7,1-(2,3-Dihydrobenzofuran-6-yl)ethanone,as a common compound, the synthetic route is as follows.

2-Bromo-l-(2,3-dihydro-benzofuran-6-yl)-ethanoneBr2 (0.36 ml, 7.01 mmol) was added dropwise to a stirring solution of l-(2,3-dihydro- benzofuran-6-yl)-ethanone (1.13 g, 6.97 mmol) in MeOH (20 mL) held at 00C. The reaction mixture was slowly allowed to reach room temperature. After 3 h, the reaction was quenched by the addition of NaHCO3 (aq, saturated)(until pH=8). Most of the methanol was removed under reduced pressure and the residue was extracted twice with EtOAc (2×20 mL). The organic extracts were pooled, washed with brine (10 mL), dried over MgSO4 and concentrated under reduced pressure. The residue was purified by preparative HPLC using a gradient of 40-70% MeCN in a 0.1M ammonium acetate buffer as eluent. The fractions containing the desired product were pooled and most of the MeCN was removed under EPO reduced pressure. The residue was extracted with EtOAc (2×20 mL) and the combined organic layers was washed with brine, dried over MgSO4 and concentrated. The obtained was finely washed MeOH to give the title compound.1H-NMR (CDC13, 400 MHz): delta 3.25 (t, 2H), 4.39 (s, 2H), 4.61 (t, 2H), 7.24-7.36 (m, 2H), 7.45-7.52 (m, IH).-, 374706-07-7

As the paragraph descriping shows that 374706-07-7 is playing an increasingly important role.

Reference：
Patent; ASTRAZENECA AB; WO2006/137796; (2006); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

23405-32-5, Methyl 1-oxo-1,3-dihydroisobenzofuran-5-carboxylate is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

Compound 2 was converted to 1,3-dihydro-1-oxoisobenzofuran-5-carbohydrazide (3) by reacting with hydrazine hydrate in methanol. To a mixture of methyl-1,3-dihydro-1-oxoisobenzofuran-5-carboxylate (2, 5.2 mmol) and methanol (5 mL) at 20-25 C, hydrazine hydrate (5 mL) was added. The reaction mass was refluxed for 4 h and the reaction completion was monitored by TLC. The reaction mass was filtered, washed with water followed by methanol and finally dried to get the pure product. White colour solid, yield: 98 %, m.p.: 220-230 C. IR (KBr, numax, cm-1): 3284 (-NH), 3178 (-NH2), 3053 (-CH), 1759 (lactone C=O), 1644 (amide C=O), 1045 (C-O); 1H NMR (400 MHz, DMSO-d6) delta ppm: 5.44 (2H, d, CH2), 7.41 (1H, m, ArH), 7.72 (1H, m, ArH), 8.01 (1H, dd, ArH), 9.81 (1H, s, CONH), 4.50 (2H, -NH2); 13C NMR (100 MHz, DMSO-d6) delta ppm: 170.2, 164.5, 144.8, 134.8, 128.7, 127.6, 126.4, 123.8, 60.6. LC-MS: m/z: 192 [M]+, 193 [M+1]+. Elemental analysis of C9H8N2O3 calcd. (found) %: C, 56.28 (56.23); H, 4.20 (4.20); N, 14.58 (14.58); O, 24.98 (24.99)., 23405-32-5

As the paragraph descriping shows that 23405-32-5 is playing an increasingly important role.

Reference：
Article; Rao, Nunna Madhava; Viveka, Tella Lakshmi; Raju, Koneti Mallikarjuna; Chary, Maringanti Thirumala; Asian Journal of Chemistry; vol. 32; 1; (2020); p. 95 – 100;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.374706-07-7,1-(2,3-Dihydrobenzofuran-6-yl)ethanone,as a common compound, the synthetic route is as follows.

2-Bromo-l-(2,3-dihydro-benzofuran-6-yl)-ethanoneBr2 (0.36 ml, 7.01 mmol) was added dropwise to a stirring solution of l-(2,3-dihydro- benzofuran-6-yl)-ethanone (1.13 g, 6.97 mmol) in MeOH (20 mL) held at 00C. The reaction mixture was slowly allowed to reach room temperature. After 3 h, the reaction was quenched by the addition of NaHCO3 (aq, saturated)(until pH=8). Most of the methanol was removed under reduced pressure and the residue was extracted twice with EtOAc (2×20 mL). The organic extracts were pooled, washed with brine (10 mL), dried over MgSO4 and concentrated under reduced pressure. The residue was purified by preparative HPLC using a gradient of 40-70% MeCN in a 0.1M ammonium acetate buffer as eluent. The fractions containing the desired product were pooled and most of the MeCN was removed under EPO reduced pressure. The residue was extracted with EtOAc (2×20 mL) and the combined organic layers was washed with brine, dried over MgSO4 and concentrated. The obtained was finely washed MeOH to give the title compound.1H-NMR (CDC13, 400 MHz): delta 3.25 (t, 2H), 4.39 (s, 2H), 4.61 (t, 2H), 7.24-7.36 (m, 2H), 7.45-7.52 (m, IH).-, 374706-07-7

As the paragraph descriping shows that 374706-07-7 is playing an increasingly important role.

Reference：
Patent; ASTRAZENECA AB; WO2006/137796; (2006); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.57830-14-5,5-Phenoxyisobenzofuran-1(3H)-one,as a common compound, the synthetic route is as follows.

To a solid mixture of 5-phenoxy-3H-isobenzofuran-l-one (65.54 g, 0.29 mol), boric acid (538 mg, 8.7 mmol) and triphenylphosphine oxide (2.42 g, 8.7 mmol) was added thionyl chloride (42.3 mL). The resulting mixture was refluxed overnight. After cooled, methanol (300 mL) was slowly added to the reaction mixture. It was then refluxed for 1 h and concentrated. Residue was partitioned between EtOAc and saturated NaHC03 solution. The organic layer was washed with brine, dried over Na2S04, filtered and concentrated to provide the title compound (87.02 g, 0.31 mol) as an oil. It was used directly to the next reaction without further purification. lH NMR in CDCI3, delta in ppm: 7.91 (d, 1 H, 8.6 Hz), 7.5-6.9 (m, 7 H), 5.06 (s, 2 H), 3.83 (s, 3 H)., 57830-14-5

The synthetic route of 57830-14-5 has been constantly updated, and we look forward to future research findings.

Reference：
Patent; FIBROGEN, INC.; HO, Wen-Bin; ZHAO, Hongda; DENG, Shaojiang; NG, Danny; WRIGHT, Lee R.; WU, Min; ZHOU, Xiaoti; AREND, Michael P.; FLIPPIN, Lee A.; WO2013/134660; (2013); A1;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

57830-14-5, 5-Phenoxyisobenzofuran-1(3H)-one is a benzofuran compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

57830-14-5, 5-phenoxyisobenzofuran-1(3H)-one (1.0g, 4.42mmol), xylene 10mL, benzyl triethyl ammonium chloride (300 mg, 1.32 mmol) and boron trifluoride diethyl ether (200 mg, 1.41 mmol) were added to the reaction flask, and the mixture was heated to 100 C dropwise to add thionyl chloride (5.0 g, 42.03 mmol). The reaction was carried out at 135 C for 5 hours. After the reaction was completed by thin layer chromatography, the filtrate was concentrated under reduced pressure. The filtrate was concentrated to 3 mL of methanol. The mixture was stirred at 55 C for 1 hour, then concentrated to dryness under reduced pressure. The potassium carbonate solution and the sodium chloride solution were washed and concentrated to dryness to give the title compound 2c (1.0 g, 83.0%).Used directly in the next step.

As the paragraph descriping shows that 57830-14-5 is playing an increasingly important role.

Reference：
Patent; Sichuan Kelun Botai Bio-pharmaceutical Co., Ltd.; Cai Jiaqiang; Xie Yinong; You Zejin; Song Changwei; Zhang Jichao; Li Lu; Zhang Qiaoling; Wang Yongqiang; Chen Xing; Jiao Shihu; Li Youqiang; Wang Tao; Zeng Hong; Song Hongmei; Ye Qijun; Su Donghai; Zhou Xin; Zhang Shaohua; Wang Lichun; Wang Jingyi; (122 pag.)CN108341777; (2018); A;,
Benzofuran – Wikipedia
Benzofuran | C8H6O – PubChem

Electric Literature of 14400-67-0, As an important bridge between the micro and macro material world, chemistry is one of the main methods and means for humans to understand and transform the material world. 14400-67-0, Name is 2,5-Dimethylfuran-3(2H)-one, SMILES is O=C1C(C)OC(C)=C1, belongs to benzofurans compound. In a article, author is Palu, Doreen Stacy, introduce new discover of the category.

Three new compounds, a dihydrobenzofuran (coumaran) derivative (compound1) and two pterocarpans (compounds2and3) were isolated from a root extract ofCalicotome villosagrowing wild in Corsica. Their structures were elucidated using 1D and 2D NMR spectroscopy and MS/MS as 2-(1-methylethenyl)-5-hydroxy-6-carbomethoxy-2,3-dihydro-benzofuran, 4,9-dihydroxy-3-methoxy-2-dimethylallylpterocarpan, and 4,9-dihydroxy-3 ‘,3 ‘-dimethyl-2,3-pyranopterocarpan.

Electric Literature of 14400-67-0, The reactant in an enzyme-catalyzed reaction is called a substrate. Enzyme inhibitors cause a decrease in the reaction rate of an enzyme-catalyzed reaction.I hope my blog about 14400-67-0 is helpful to your research.

Reference:
Benzofuran – Wikipedia,
,Benzofuran | C8H6O – PubChem

Chemistry is the science of change. But why do chemical reactions take place? Why do chemicals react with each other? The answer is in thermodynamics and kinetics, Recommanded Product: Furan-2(5H)-one, 497-23-4, Name is Furan-2(5H)-one, SMILES is O=C1OCC=C1, belongs to benzofurans compound. In a document, author is Mervai, Zsolt, introduce the new discover.

BPAP is a potent enhancer substance with catecholaminergic and serotoninergic activity in the brain. It was discovered that it is also effective against certain types of experimental cancers, showing the most promising results in case of lung cancer. That is why we tested its efficacy in two different doses in a newly developed EGFR wild type mouse lung adenocarcinoma xenograft model. Experiments were conducted on FVB/N and SCID mouse strains treated with low and high dose of BPAP. Body weight, survival, and tumor volumes were recorded. Furthermore, the activity of major signaling pathways of NSCLC such as MAPK and Akt/mTOR as well as cell cycle regulation were determined. Significant inhibition of tumor growth was exerted by both doses, but the mechanism of action was different. High dose directly inhibited, whereas low dose activated the main signaling pathways. Exposure to low dose BPAP resulted in elevated activity of the mTOR pathway together with p16(INK)-induced cell cycle arrest, a typical feature of geroconversion, a senescent state characterized by loss of cell proliferation. Finally the events culminated in cell cycle inhibition point in case of both doses mirrored by the decrease of cyclin D1, CDK4 and PCNA. In addition, BPAP treatment had a beneficial effect on bodyweight suggesting that the compound at least in part is able to compensate the cancer-related wasting. In view of the low toxicity and confirmed antitumor effect of BPAP against experimental lung adenocarcinoma, this novel compound deserves further attention.

A reaction mechanism is the microscopic path by which reactants are transformed into products. Each step is an elementary reaction. In my other articles, you can also check out more blogs about 497-23-4. Recommanded Product: Furan-2(5H)-one.

Reference:
Benzofuran – Wikipedia,
,Benzofuran | C8H6O – PubChem