One of the major reasons for studying chemical kinetics is to use measurements of the macroscopic properties of a system, HPLC of Formula: C10H10O2, such as the rate of change in the concentration of reactants or products with time.In a article, mentioned the application of 29040-52-6, Name is 6-Methoxy-3-methylbenzofuran, molecular formula is C10H10O2
Fast pyrolysis is a promising technology to promote wood biomass utilization. This thermochemical process produces mainly a liquid bio-oil. Currently, a direct application of bio-oil as fuel is limited due to its poor physicochemical properties. Pressurized Hot Water Treatment (PHWT) has been applied on white spruce and trembling aspen whole wood chips prior to production of pyrolysis oil. The effect of PHWT and the influence of the fast pyrolysis parameters on the bio-oil composition and products distribution were investigated by analytical pyrolysis coupled with gas chromatography/mass spectrometry (Py-GC/MS), it was carried out at two heating rates (100C/min and 1000C/min) and in temperature ranges from 350C to 500C for trembling aspen and from 400C to 550C for white spruce. The pyrolysis products were identified to belong to eleven chemical groups: syringyl derivatives, guaiacyl derivatives, other phenolics, anhydrosugars, low molecular weight acids, fatty acids, furans, pyrans, ketones, aldehydes and alcohols. The results of the analytical pyrolysis indicate that the higher yield is obtained from pretreated than from untreated biomass. The effect of the pretreatment is more important for the 1000C/min heating rate than for 100C/min. The composition analysis revealed that the higher peak area% of anhydrosugar were obtained from PHWT biomass at 1000C/min while the phenols were the major constituents of the pyrolysis products obtained at lower, 100C/min heating rate. It is also demonstrated that the acids are still found in pyrolysis products even after pretreatment. The Py-GC/MS results obtained in this study indicate that pretreatment affected the hardwood and softwood in quite different ways.
Sometimes chemists are able to propose two or more mechanisms that are consistent with the available data. HPLC of Formula: C10H10O2, If a proposed mechanism predicts the wrong experimental rate law, however, the mechanism must be incorrect.Welcome to check out more blogs about 29040-52-6, in my other articles.
Reference：
Benzofuran – Wikipedia,
Benzofuran | C8H2115O – PubChem