One of the major reasons for studying chemical kinetics is to use measurements of the macroscopic properties of a system, HPLC of Formula: C8H2F2O3, such as the rate of change in the concentration of reactants or products with time.In a article, mentioned the application of 18959-30-3, Name is 4,5-Difluorophthalic Anhydride, molecular formula is C8H2F2O3
Novel imide oligomers (calculated molecular weights: 1250-5000 g mol1) based on the mixture of thioetherdiphthalic anhydride isomers (m-TDPA) with 2-phenyl-4,4?-diaminodiphenyl ether (p-ODA) in the presence of 4-phenylethynylphthalic anhydride (PEPA) as reactive endcapping agent were prepared. Then pyromellitic dianhydride (PMDA) was introduced to the polymerization of m-TDPA/p-ODA (mole m -TDPA:molePMDA = 1:1). The effect of molecular weights and polymer chemical structures of the aromatic oligomers on their processability and solubility as well as the thermal and mechanical properties of the thermal-cured polyimides (PIs) was systematically investigated. All the oligomers showed good solubility (more than 30 wt%) in N-methyl-2-pyrrolidone and very low melt viscosities. The minimum melt viscosities of Oligo-5 was 61.5 Pa s at 321C. The melt viscosity of the oligomers increased with the increase of molecular weight. After thermally curing at 370C for 1 h, the thermoset PIs exhibited good thermal properties. The glass transition temperatures of oligomers measured by differential scanning calorimetry were in the range of 264-337C, and the temperature of 5% weight loss was higher than 505C. The cured films also demonstrated good mechanical properties with tensile strength and modulus greater than 52 MPa and 2.9 GPa, respectively.
One of the oldest and most widely used commercial enzyme inhibitors is aspirin, HPLC of Formula: C8H2F2O3, which selectively inhibits one of the enzymes involved in the synthesis of molecules that trigger inflammation. you can also check out more blogs about 18959-30-3
Reference：
Benzofuran – Wikipedia,
Benzofuran | C8H2966O – PubChem