Learn more about cas: 38103-06-9 | Polymer 2022

5,5′-((Propane-2,2-diylbis(4,1-phenylene))bis(oxy))bis(isobenzofuran-1,3-dione)(cas: 38103-06-9) is a diallyl based epoxy modification agent that blends with the resin to improve the mechanical property of the epoxy material.Computed Properties of C31H20O8 It is majorly used in novalac based resins, which can be further cured with bismaleimides (BMI) for aerospace, electronics and wireless communication based applications.

Jiang, Hongyu;Zhang, Hong;Wen, Yaqing;Tan, Liyun;Fang, Xingzhong;Chen, Guofei published 《Synthesis and comparative study on copolyetherimides from mixed isopropylidenebis(1,4-phenylene-oxy) bis(phthalic anhydride)s》 in 2022. The article was appeared in 《Polymer》. They have made some progress in their research.Computed Properties of C31H20O8 The article mentions the following:

Mixed isopropylidenebis(1,4-phenylene-oxy) bis(phthalic anhydride)s with different ratios (Mixed-BPADA 1-3) were synthesized successfully via aromatic nucleophilic substitution from nitrophthalonitrile and bisphenol A. The corresponding copolyetherimides (CoPEIs) were prepared with two representative aromatic diamines (4,4′-oxydianiline (4,4′-ODA) and m-phenylenediamine (m-PDA)) via two-step procedure and chem. imidization. CoPEIs showed Tgs from 222 to 256°C and Td5%s from 486 to 505°C in argon, good mech. properties (tensile moduli of 2.5-2.9 GPa, tensile strengths of 69-96 MPa, and elongations at break of 3.3-6.3%), and good solubility With the introduction of 3-substituted phthalimide unit, CoPEIs displayed higher Tg values, lower elongations, better solubility and larger d-spacings. The rheol. properties of thermoplastic polyimide resins based on the mixed-BPADA were investigated. CoPEI-b series displayed good melt processibility, and the CoPEI-3b derived from mixed-BPADA 3 and m-PDA had the lowest melt viscosity among the copolymers. Compared to isomeric PEIs derived from BPADA isomers, CoPEIs displayed lower melt viscosities, indicating that the melt processibility had been greatly improved. And 5,5′-((Propane-2,2-diylbis(4,1-phenylene))bis(oxy))bis(isobenzofuran-1,3-dione) (cas: 38103-06-9) was used in the research process.

5,5′-((Propane-2,2-diylbis(4,1-phenylene))bis(oxy))bis(isobenzofuran-1,3-dione)(cas: 38103-06-9) is a diallyl based epoxy modification agent that blends with the resin to improve the mechanical property of the epoxy material.Computed Properties of C31H20O8 It is majorly used in novalac based resins, which can be further cured with bismaleimides (BMI) for aerospace, electronics and wireless communication based applications.

Reference:
Benzofuran – Wikipedia,
Benzofuran | C8H6O – PubChem