New progress of cas: 38103-06-9 | ACS Nano 2021

5,5′-((Propane-2,2-diylbis(4,1-phenylene))bis(oxy))bis(isobenzofuran-1,3-dione)(cas: 38103-06-9) is a diallyl based epoxy modification agent that blends with the resin to improve the mechanical property of the epoxy material.Application of 38103-06-9 It is majorly used in novalac based resins, which can be further cured with bismaleimides (BMI) for aerospace, electronics and wireless communication based applications.

Application of 38103-06-9《Polyimide Aerogel Fibers with Superior Flame Resistance, Strength, Hydrophobicity, and Flexibility Made via a Universal Sol-Gel Confined Transition Strategy》 was published in 2021. The authors were Li, Xin;Dong, Guoqing;Liu, Zengwei;Zhang, Xuetong, and the article was included in《ACS Nano》. The author mentioned the following in the article:

Aerogel fibers with ultrahigh porosity, large sp. surface area, and ultralow d. have shown increasing interest due to being considered as the next generation thermal insulation fibers. However, it is still a great challenge to fabricate arbitrary aerogel fibers via the traditional wet-spinning approach due to the obvious conflict between the static sol-gel transition of the aerogel bulks and the dynamic wet-spinning process of aerogel fibers. Herein, a sol-gel confined transition (SGCT) strategy was developed for fabricating various mesoporous aerogel fibers, in which the aerogel precursor solution was first driven by the surface tension into the capillary tubes, then the gel fibers were easily formed in the confined space after static sol-gel process, and finally the mesoporous aerogel fibers were obtained via the supercritical CO2 drying process. As a typical case, the polyimide (PI) aerogel fiber prepared via the SGCT approach has exhibited a large sp. surface area (up to 364 m2/g), outstanding mech. property (with elastic modulus of 123 MPa), superior hydrophobicity (with contact angle of 153°), and excellent flexibility (with curvature radius of 200μm). Therefore, the aerogel woven fabric made from PI aerogel fibers has possessed an excellent thermal insulation performance in a wide temperature window, even under the harsh environment. Besides, arbitrary kinds of aerogel fibers, including organic aerogel fibers, inorganic aerogel fibers, and organic-inorganic hybrid aerogel fibers, have been fabricated successfully, suggesting the universality of the SGCT strategy, which not only provides a way for developing aerogel fibers with different components but also plays an irreplaceable role in promoting the upgrading of the fiber fields.5,5′-((Propane-2,2-diylbis(4,1-phenylene))bis(oxy))bis(isobenzofuran-1,3-dione) (cas: 38103-06-9) were involved in the experimental procedure.

5,5′-((Propane-2,2-diylbis(4,1-phenylene))bis(oxy))bis(isobenzofuran-1,3-dione)(cas: 38103-06-9) is a diallyl based epoxy modification agent that blends with the resin to improve the mechanical property of the epoxy material.Application of 38103-06-9 It is majorly used in novalac based resins, which can be further cured with bismaleimides (BMI) for aerospace, electronics and wireless communication based applications.

Reference:
Benzofuran – Wikipedia,
Benzofuran | C8H6O – PubChem